lytmi SLS01 Smart Light Strip Basise Kit User Manual

lytmi SLS01 Smart Light Strip Basise Kit

What’s in the box

• light Strip             1
• Smart RGB Controller   1
• Power Adapter          1
• Fixing clips & screws      10
• Ussr Manual         1

Specification

• Light strip Length       5m/76ft per roll
• LED Color        5050RGB+2835CW
• Color Temperature  2700k-6500k
• Power Supply output voltage   DC 24V
• DC Power Size    5.5×2.1mm
• Maximum current     2A

Installations

1. Clean the surface to ensure it’s dustless and dry

2. Cut the light Strip (optional)
   Cut the light strip according to your need

3. Take off the protective film on the tape, stick the light strip on and press over It filmy.

4. Place the light strip on the clips when it is necessary
   There are 2 ways for the fixing clips:

   • Use the 3M stickers directly
   • Reinforce clips and Screws provided

5. Connect the light strip with the controller

6. Connect the power adapter with the controller, then power on

Control the light

1. Control via the controller
   

2. Reset the light manually:

   • Long press the button for 5s or above.

   • Remove the device from the APP manually.
     Tap in the “Smart light strip” and remove it.

   • Turn the device ON-OFF-ON-OFF-ON until the light blinks or breathes.

3. Control via the APP (The sync mode can be only controlled via APP)

   • Download Lytmi APP

   • Make sure your WIFI is under 2.4Ghz; Turn on Bluetooth and GPS/location on your phone.

   • On the APP, register and log in. The APP will detect the
     “Smart Light Strip” automatically. Tap and add it.

   • Tap Setting> Synchronize to customize the sync mode
     (Neo HDMI2.0 sync box standard edition required)

   • Tap Scene to select/change the light mode and enjoy!

Voice Control

Support Voice Assistant like: Alexa, Google Assistant and Smart Things.

By “Lytmi Station” Desktop APP

Download the software on our official website: https://ilytrmi.com/
(Only supports WIN10 above)
notice

• The sync mode requires Neo HDM/2.0 sync box standard edition required or PC Screen Strip Light; It also requires HDMI Sync Box or Lytmi Station Desktop APP in the same WIFI router. (The HDMI Sync Box should be on, otherwise, it cannot be synced)
• The light strip can be extended another 15 meters. (Maximum length of 20 meters in total)
• If the light strip was cut, it cannot be extended anymore.

Troubleshooting

1. Cannot connect with Lytmi APP

   • Make sure the light is well connected and powered on.
   • Make sure the Bluetooth, GPS is on and your WiFi is under 2.4Ghz
   • Make sure the distance between the controller and the phone less than 1 meter while connecting.
   • Re-power on the strip and re-turn the Bluetooth in your phone to try again.

2. Cannot use the sync mode.
   Please make sure you have Neo HDMI2.0 sync box standard edition required or Lytmi Station Desktop APP for the sync mode.

3. The strip lights do not work

   • Pull out each connective part and re connect them.
   • Tap ON/OFF button on the controller or APP to exclude the light strips issue.

If you have any problem about the item or something is unfounded in the package, feel free to contact us.
Our email: [email protected]

Customer Service

Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>