Caibo T3 3 In 1 Desktop Wireless Charger User Manual
- June 8, 2024
- Caibo
Table of Contents
Caibo T3 3 In 1 Desktop Wireless Charger
Product Specifications
- Input: 5V/2A, 9V/2A, 12V/2A
- Mobile Output: 15W / 10W / 7.5W / 5W
- Watch Output: 2.5W
- Earphone Output: 5W
- Input Interface: Type-C Interface
- Charging Frequency: 115-205 kHz
- Magnetic Attraction: 0.8KG
- Product Size: 118.03 x 150.13 mm
Product Usage Instructions
- Connect Power Supply: Plug in the power supply and turn on the product.
- Charging Devices: Place the phone/earphone/watch in the corresponding charging position to charge them normally.
- Charge Multiple Devices: You can charge up to3 Apple devices simultaneously.
FAQ
-
Q: What devices are compatible with this wireless charger?
A: This wireless charger is compatible with smartphones like iPhone 12/13/14/15 series and other Qi phones, smartwatches like Apple Watch, and earphones such as Apple AirPods, Samsung earbuds, and other Qi-compatible devices. -
Q: What should I be cautious about when using this product?
A: Avoid squeezing or colliding with the equipment, keep it away from magnetic cards to prevent failure, and do not modify the product warranty card without authorization. -
Q: What is the warranty for this product?
A: The product comes with a 12-month warranty from the purchase date, excluding surface damage and missing accessories. Any repairs outside the warranty period will incur charges.
Package
- 3 in 1 Desktop Wireless charger *1
- Type-C charging cable *1
- User Manual *1
Functional component
Use steps
- Connect the power supply and power up the product.
- Place the phone/earphone/watch in the corresponding charging position and charge it normally
LED intelligent indicator
- Green light on:
- Standby status
- Wireless charging mobile phone
- Green light breathing:
- Green light flashing:
- Foreign object detected
- Long press 1S to turn on or off the indicator light
- Flash fast for 5 seconds before closing
Charging diagram
Rechargeable Apple phone
- iPhone 12/13/14/15 non-MagSafe phones 12
- Magnetic ring can be added with mobile phone
Apple watch only
- Apple Watch Ultra
- Apple Watch Series/Full range
- Apple Watch SE
- Apple Watch Nermes
Apple earphone only
- AiPods1
- AiPods2
- AiPods3 Pro
Charge 3 Apple devices at the same time
Applicable Devices
-
Smartphone：For non-MagSafe phones, please use an extra magnetic ring or MagSafe case to use this product. Support iPhone 12/13/14/15 series and other Qi phones
-
Smart Watch:
Apple Watch -
Earphone:
Apple AirPods/ Samsung earbuds and other Qi-compatible devices
Product specification
- Input: 5V/2A, 9V/2A,12V/2A
- Mobile output: 15W/10W/7.5W/5W
- Watch output: 2.5 W
- Earphone output: 5 W
- Input interface: type-C interface
- Charging frequency: 115-205 kHZ
- Magnetic attraction: 0.8KG
- Product size: 118.03 * 150.13mm
Caution
- Do not over-squeeze or collide with the equipment.
- Please do not place it too close to the magnetic card(ID card, bank card, etc.) with a magnetic stripe or chip to avoid magnetic card failure
Warranty
The three guarantee periods of this product: from the purchasing date (Prevail to the customer receipt date or invoice date), provide 12 months guarantee. product surface man-made damage, accessories missed do not include in this guarantee, repair service for the product is out of the guarantee period or not covered by warranty, customer need to pay the repair charge
Product Warranty Card
- For your rights and interests, please fill in carefully and keep it properly as a pre-maintenance voucher!
- Do not modify the content without authorization, otherwise it will be deemed invalid.
- The company reserves the final right to interpret the after-sales service regulations of the product
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used by the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning : changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator and your body