bebird K3/T3 Smart ear-clean camera User Manual

bebird K3/T3 Smart ear-clean camera

Step 1 : Download The App

iOS : Search “bebird” in App Store
Android: Search ” bebird ” in Google Play

Or scan the QR code to download the app

Step 2 : Connect To The Wifi

1. Open APP Connect to the WiFi in the settings
   

2. Press the power button to turn on
   

3. Connect Product Wi-Fi “bebird-K3-XXXXXX”
   

4. Back to bebird app start to use it
   

Accessory Replacement

For a better user experience, we recommend replacing the ear tip at least every 3 months.
(This can be adjusted according to the frequency of use.)

Accessory

Model No.: bebird K3

1. PC ear spoon Xl

2. Cotton swab ear tip Xl

3. Charging Cable x 1

4. Storage tube xl

Model No.: bebird K3 Pro

1. Metal and silicone ear spoon x l

2. Cotton swab ear tip x3

3. PC ear spoon x5

4. Charging Cable X l

5. Standing  base xl

Note: Oo not use the charging equipment with output voltage exceeding SV

Troubleshooting

The charging time is 50 mins
The app exits quickly| Delete the existing app and scan QR to reinstall it
Feel tricky with replacing ear tips| Align the replacement ear tip to camera and tighten clockwise
Indicator light flashes| Please use the incidental charging cable to charge. The charging time is 50 mins
Abnormal display in app| Interrupt the connection, restart the product to connect again
If you still have problems with the above procedures, please contact our Customer Service Representatives directly for further assistance

Hazardous substance

Part name

|

Hazardous material

---|---

(Pb)

| (Hg)| (Cd)| (Cr(VI))| (PBB)|

(PBDE)

Printed Circuit Components

|

X

|

◯

| ◯| ◯| ◯|

◯

Case

|

◯

| ◯| ◯| ◯| ◯|

◯

Plastic rubber accessory

|

◯

| ◯| ◯| ◯| ◯|

◯

This form is formulated in accordance with SJ/T 11364
◯ : represent the hazardous materrial ratio is below GB/T26572-2011
X: represent the hazardous material ratio is over GB/T26572-2011

Product Parameters

Attention

1. When cleaning lens, please wipe it carefully with professional alcohol cotton swabs.

2. Please observe your surroundings before use. Stay at least 2ft away from people, animals, or moving objects when using.
   Don’ t use in a moving vehicle or other unstable environments.
   Please don’ t move around when using.

3. This product is unsuitable for children under 3 years old.

4. This product is not suitable for children to use alone.

5. Do not place in a humid environment for a long time or soak in liquids.

6. There is a built-in rechargeable lithium-ion battery. Even if you do not use it, you should charge it once a month to avoid long-term battery damage.

7. Please use a SV charger to charge the device. Do not use this product while being charged.

8. Avoid direct exposure to the sun.

9. Do not put heavy objects on the product.

10. It is normal for the temperature to rise slightly when using (up to 9S°F).

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>