Bebird R3 Smart Visual Ear-Clean Rod User Manual
- June 6, 2024
- bebird
Table of Contents
Bebird R3 Smart Visual Ear-Clean Rod User Manual
Download the APP
IOS
Search for “bebird” in App
Store
Android
Search for “bebird” in Google
Play
-
QR scan the QR code to download the app
-
Open APP Click Bebird R3
-
Press and hold the power button to turn on the ear cleaning rod
Connect product WiFi
-
Connect Product Wi-Fi “bebird-XXXX”
-
Back to Bebird app Enter and start to use it
Accessory replacement
Spinning to open the fixing ring to replace the ear spoon Insert the buckle of
ear spoon, spinning to tighten the fixing ring
Accessory
-
Q-Elastic Big ear pick tips x 2 Global First pc and Silica Gel Synthetic Earspoon
-
Transparent ear spoon x Dig the ear canal deeply and swap out a large amount of eanwax
PRODUCT SIZE
Attention
- When cleaning lens, please wipe it carefully with professional alcohol cotton swab.
- Please don’ t use it while you are moving, and protect from being hit by others.
- This product is unsuitable for children under 3 year old.
- It is forbidden for children to use this product alone in order to avoid accidental harm.
- Please do not put the product in liquid to avoid damage.
- Product built-in rechargeable lithium battery, so it must be charged once a month If it is not used frequently.
- Avoid product exposure to sunshine directly, especially the accessories, in order to avoid softening.
- During using it, the temperature of the product will rise slightly (up to 35 degree), please rest assured to use.
- To ensure the best experience, please keep the child in a sitting position and operate the product horizontally.
TROUBLESHOOTING
| Solution | |
|---|---|
| Please use the attached charging cable for quick charging. The charging |
time is 45 minutes
Camera does not turn on| Close and open the cover to try a few times
APP quit quickly| Delete the existing APP and re-scan the QR code for
installation
Installation of tools in accessory barrel is not smooth| Firstly align the
ear-cleaning tool with the lens sleeve, then install it into the lens sleeve
Rod’s power indicator is red| Please use the attached charging cable for
charging. The charging time is 45 minutes
The display on the app is not reading properly.| Disconnect the phone with
product and open cover to restart it, then set phone to reconnect product.
WiFi connection is unstable, sometimes it is disconnected in seconds| Close
and open the cover to restart rod and restart app in phone to connect rod
If you still have problems with the above procedures, please contact our
Customer Service Representatives directly for further assistance
HAZARDOUS SUBSTANCES
| Part name | Hazardous material |
|---|---|
| ( Pb ) | ( Hg ) |
| Printed Circuit Components | X |
| Case | O |
| Plastic rubber accessory | 0 |
This form is formulated in accordance with SJ/T 11364
0 : represent the hazardous maternal ratio is below GIEVT26572-2011
X : represent the hazardous maternal ratio is over GB/T26572-2011
Product parameters
Brand bebird
Product Name Smart visual ear-clean Rod
Model bebird R3
Rod weight 15g
Network standard IEEE 802.11b/g/n
Antenna Internal FPC antenna
Working frequency 2.4Ghz
Image transmission rate 30fps
image sensor CMOS
Working temperature -10 – 50°C
Battery 185mAh lithium battery
Battery life about 45 minutes
Charging time 45 minutes
Input current DC 5V 300mA
Lens diameter 3.5mm
Optimum focal length 1.5 – 2cm
Pixel 3M
Gyroscope 3 axis
FCC ID:2AU63-BEBIRDR3
WARRANTY
User Info|
---|---
User name:| Telephone number:
Address:|
Seller:| Telephone number:
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Smart visual ear-clean Rod
Model: bebird R3
210-151082