bebird Note3 Smart Visual Ear Cleaning Rod User Manual

June 6, 2024
bebird

Note3 Smart Visual Ear Cleaning Rod
User Manual

Solve the problem of ear cleaning for the entire family

Open be bird Note3

IOS
Search for “bluebird” in App Store Android Search for “bluebird” in Google Play

  1. Scan QR code to download APP
    bebird Note3 Smart Visual Ear Cleaning Rod - QR code

  2. Enter APP Select bluebird Note3

  3. Open the cover Power on automatically
    bebird Note3 Smart Visual Ear Cleaning Rod - Open bebird
note3

Connect Product WiFi

  1. Connect product WiFi “bluebird-Note3-xxxx”

  2. Back to be bird APP Click on “Start” to use it
    bebird Note3 Smart Visual Ear Cleaning Rod - Connect product
wifi

  3. Click on the tweezers sign to switch between tweezers opening and tweezers clamping

  4. Miniature robotic arm Open the visual tweezers Clamp earwax
    bebird Note3 Smart Visual Ear Cleaning Rod - Connect product wifi
2

Accessory replacement

Cover the tweezers with the ear spoon Fasten the ear spoon

bebird Note3 Smart Visual Ear Cleaning Rod - Accessory
replacement

Storage base

Spin the cover of the base to open it Swap accessories

Accessory

  1. Classic Q-elastic Ear Spoon x 4 Smooth use with no harm to the ear A set separated for each family member

  2. Special Cleaning Ear Spoon x 4 Clean the earwax Olg deep into the Inner ear for hidden corners

  3. Curved-necked Annular Ear Spoon x 4 Easy for scraping Professional In removing stubborn earwax

  4. Mini Brush x 1 Clean lens, tweezers, and scoops

  5. Microlens Cover x 1 Cover the magnifying target with the Plug the ear cleaning rod in the lens cover, It turns Into an electronic magnifier Canal Protection Plug x 1

  6. Avoid accidental injury to the vulnerable ear canal

  7. Alcohol Cotton Swab x 5 Softening Cotton Swab x 5 Clean the ear canal Soften stubborn earwax

  8. Type-C cable x 1 Fast and convenient charging

Product Size

bebird Note3 Smart Visual Ear Cleaning Rod - Product
size

Hazardous substance

Part name|

Hazardous material

---|---

( Pb)

| ( Hg )| ( Cd )| ( Cr(VI) )| ( PBB )|

( PBDE )

Printed Circuit Components|

X

| O| O| O| O| O
Charging Base|

X

| O| O| O| O| O
Case|

O

| O| O| O| O| O
Plastic Rubber Accessory|

O

| O| O| O| O| O

This form is formulated in accordance with SJ/T 11364
O: represent the hazardous materrial ratio is below 8/T26572-201f
X: represent the hazardous materrial ratio0is over G8/T26572-201f

Troubleshooting

Trouble Solution
Startup and no response Please try several more times according to the

correct boot-up method.
Please use the attached charging base for charging. The charging time is about 1h.
Camera does not turn on| Shut down and restart the ear cleaning rod.
APP quits quickly| Delete the existing APP and re-scan the OR code for installation.
The power indicator of the ear cleaning rod shows blue light flashing rapidly| Charge the ear cleaning rod with the charging base from the original packing
WiFi connection is unstable, sometimes it is disconnected in seconds| Restart ear cleaning rod, reconnect bluebird APP.
The product failed to display the real-time image after successfully connecting the bluebird APP| Disconnect the phone from WiFi, restart the product and reconnect the WiFI.
If the above operation still fails to solve the problem, please contact Customer Service for further assistance.

Attention

  1. When cleaning the lens, please wipe it carefully with a professional alcohol cotton swab.
  2. Make sure the ear spoon is well installed before using, to prevent the ear spoon from falling off.
  3. Please don’t use it while you are moving, and protect yourself from being hit by others.
  4. It is forbidden for children to use this product alone in order to avoid accidental harm.
  5. Please do not put the product in liquid to avoid damage.
  6. Product built-in rechargeable lithium battery, so it must be charged once a month If it is not used frequently.
  7. Avoid product exposure to sunshine directly, especially the accessories, in order to avoid softening.
  8. During using it, the temperature of the product will rise slightly (Data from being bird lab, the maximum temperature of the machine doesn’t exceed about 45t), please rest assured to use.

Product parameter

Brand bluebird
Product Name bluebird smart visual ear cleaning rod
Model bluebird Note3
Rod weight 128g
Network standard IEEE 802.11b/g/n
Antenna Wire antenna
Working frequency 2.4Ghz
Image transmission rate 20fps
Image sensor CMOS
Working temperature -10 – 50t
Battery 300mAh lithium battery
Battery life About 70 minutes
Charging time 1h
Input parameters 5V 0.4A
Working voltage 4.2V
Rated power 1.5W
Lens diameter 3.7mm
Optimum focal length 1.5 – 2cm
Pixel 1000W
Gyroscope 6 axis

Warranty card

User information|
---|---
User name:| Telephone number:
Purchase date:|
Seller:| Telephone number:

bebird smart visual ear cleaning rod
Model: bluebird Note3

FCC ID:2AU63-BEBIRDNOTE3

Solve the problem of ear cleaning for the entire family

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals