bEbird NOTE5 3-In-1 Multifunctional Earwax Removal User Manual
- June 4, 2024
- bebird
Table of Contents
bEbird NOTE5 3-In-1 Multifunctional Earwax Removal
Download the APP
-
IOS
Search for “bebird” in App Store -
Android
Search for “bebird” in Google Play
OR scan the QR code to download the app
- Open the cover Power on automatically
- Open the APP Connect device WiFi
APP Connection
- Connect product WiFi “bebird-xxxxxx”
- Back to bebird APP Click on “GO“ to use it
- Click on the tweezers sign to switch between tweezers opening and tweezers clamping
- Press the body button Control the opening and closing of the tweezers
Product Images
Please replace the ear tip with a new one every 3 months to avoid aging and breakage.
Accessories
Product Size
Troubleshooting
Failure Phenomenon
|
Solution
---|---
No response to power on / No sign of power| Please use the matching charging
cable for charging
Camera does not light up
|
Turn off and restart the earwax removal
App keeps crashing
| Uninstall the existing APP, re-scan the QR code for installation
Ear cleaner indicator shows red light
| Please use the matching charging cable for charging, the full charge time is
about 60 minutes
The product successfully connected to the APP does not display the real-time
image normally|
Disconnect the phone from the earwax removal Wi-Fi, restart the earwax removal and reconnect the Wi-Fi
Wi-Fi connection is unstable, sometimes disconnected in a few seconds|
Restart the earwax removal and reconnect to the APP
The lens is blurred
| When cleaning the lens, please wipe it carefully by matching a double-headed cleaning brush or alcohol swab
Wrong direction when using
| Please switch the left/right ear mode at the bottom of the APP interface
The tweezer head cannot be controlled
|
Please switch to “Tweezer mode” at the bottom of the APP interface and click the APP tweezer icon to control the opening and closing
If the above operation still does not solve the problem, please contact bebird customer service.
We will further provide you with practical solutions
Product parameter
FCC STATMENT
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
- The device has been evaluated to meet the general RF exposure requirements.
- The device can be used in portable exposure conditions and compliance with exposure reguirements.