MEAN WELL XLN-40 Series 40W Multiple Stage Constant Power Owner’s Manual

MEAN WELL XLN-40 Series 40W Multiple Stage Constant Power

Specifications

• Model: XLN-40-12, XLN-40-24, XLN-40-H-
• Output:
  • Rated Voltage: 12V (XLN-40-12), 24V (XLN-40-24)
  • Rated Current: 3.4A (XLN-40-12), 1.7A (XLN-40-24), 1050mA (XLN-40-H-)
  • Rated Power: 40.8W
  • Ripple & Noise: 60mVp-p
• Input:
  • Voltage Range: 100 ~ 305VAC
  • Frequency Range: 47 ~ 63Hz
  • Power Factor: PF0.97/115VAC, PF0.95/230VAC, PF0.92/277VAC
• Efficiency (Typ.): 86% (XLN-40-12), 88% (XLN-40-24)
• Dimming Operation: B type, 3 in 1 dimming function

Product Usage Instructions

Installation

1. Ensure the input voltage matches the specified range.
2. Connect the LED driver to the LED lights following the wiring diagram provided.

Dimming Functionality
The output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, 10V PWM signal, or resistance.

NFC Setting for XLN-40-H-

1. Download the MEAN WELL app from the Apple Store or Google Play Store.
2. Search for MEAN WELL within the app.
3. Approach the LED driver NFC sensing position with your phone.
4. Follow on-screen instructions to adjust functional parameters as needed.

Features

• Constant power mode output with multiple stage selectable by NFC setting (H-type)
• Constant voltage mode output(12V/24V)
• Plastic housing with class 11/2 and PFC design
• Flicker free, complying with IEEE1789/ErP
• Standby power consumption <0.5W
• Meet emergency lighting (EL) function application
• Fully encapsulated with IP67
• Minimum dimming level 0.1% (DALI-2 DT6)
• Dimming functions: 3 in 1 dimming (Dim-to-off) DALI-2 + Push dimming
• 5 years warranty

Applications

• Recessed Light
• Downlight
• Panel Light
• Commercial Lighting
• Decorative Lighting
• LED strip lighting
• DALI digital Lighting

GTIN CODE
MW Search: https://www.meanwell.com/serviceGTIN.aspx

Description

XLN-40 Series is a 40W with constant power and constant voltage output LED driver. It can operate from 110~305V AC and output current ranging between 600 mA to 1400 mA selectable by NFC setting. Thanks to high efficiency up to 88%, it is able to operate for -25°C ~90°C case temperature under free air convection. XLN-40 is designed based on latest safety regulation with 3 in 1 and DALI-2 dimming. XLN-40 can also be adjusted for brightness with a push button as a simple way dimming, so it provides the design flexibility for LED Lighting application.

Model Encoding

Note:

1. 12V/24V output is fixed without NFC function and Dimming.
2. For more current setting, please contact MW sales representative.

SPECIFICATION

BLOCK DIAGRAM

DRIVING METHODS OF LED MODULE

I-V Operating Area
XLN-40-H

For 40W application

**CONSTANT POWER TABLE

**

XLN-40-H is a multiple-stage constant power driver, the selection of output current through the NFC setting is exhibited below.

Note : The operating voltage range show on this table is recommended to use.

**NFC Function Description

**

The output current of the NFC Mode LED driver can be adjusted using NFC via the mobile APP Operation Instruction

• Compatible phone
  Install an NFC-compatible smart mobile device or phone with AndroidTM 4.1 or IOS12 updates.

• Steps for setting output current via NFC

1. Download Meanwell APP on mobile device or mobile phone, and enable NFC function.
2. Check the NFC antenna position of the mobile phone please.
3. Enter Meanwell APP ->Top left menu –Installation Manual/APP->PowerNFC, approach the LED driver NFC sensing position and perform sensing.
4. APP displays the functional parameters, and the relevant parameters are modified as required.
5. Tap the APP write button and quickly move the phone antenna close to the NFC sensing position of the LED driver.
6. The write completes when the mobile phone displays”Success”.

APP Function Description

APP Interface:

To be used through APP available on Apple Store and Google Play Store for iOS and Android. Search: MEAN WELL on

DIMMING OPERATION

3 in 1 dimming function

• Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance.
• Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
• Dimming source current from power supply: 100μA (typ.)

Note :

1. Min. dimming level is about 6% and the output current is not defined when 0%< Iout<6%.
2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle.

DA2 type (DALI-2 digital dimming function)

Input wiring diagram

PUSH dimming (primary side)

• The factory default dimming level is at 100%.
• If the push action lasts less than 0.05 sec., it will not lead to a change for the status of the driver.
• Up to 10 drivers can perform the PUSH dimming at the same time when utilizing one common push button.
• The maximum length of the cable from the push button to the last driver is 20 meters.

dimming up or down

OUTPUT LOAD vs TEMPERATURE

STATIC CHARACTERISTIC

LIFE TIME

TOTAL HARMONIC DISTORTION (THD)

XLN-40-H Model,Tcase at 75℃

POWER FACTOR (PF) CHARACTERISTIC

XLN-40-H Model,Tcase at 75℃

EFFICIENCY vs LOAD

XLN-40 series possess superior working efficiency that up to 88% can be reached in field applications.

XLN-40-H Model,Tcase at 75℃

MECHANICAL SPECIFICATION

Blank Type

Installation Manual
Please refer to: http://www.meanwell.com/manual.html

FAQ

How do I adjust the output current for XLN-40-H- using NFC?
To adjust the output current for XLN-40-H-, download the MEAN WELL app, approach the LED driver with your phone, and follow the on-screen instructions to modify the parameters.

Can I connect additional drivers to the LED driver?
No, it is not recommended to connect additional drivers to the LED driver. Direct connection to LEDs is suggested for optimal performance.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>