GE APPLIANCES JVM7195SK Range Sensor Microwave Oven Instruction Manual
- June 21, 2024
- GE Appliances
Table of Contents
JVM7195SK/DK/EK/EW/FL/RW
GE® 1.9 cu. ft. Over-the-Range Sensor Microwave Oven
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
NOTE: Requires 120V grounded outlet. Electrical receptacle must be
located in cabinet above microwave oven. No additional wiring, venting or
cabinet rebuilding necessary in many cases. Complete detailed, easy-to-follow
installation instructions and convenient full- size templates are packed with
the microwave oven.
IMPORTANT INFORMATION: When installing the microwave oven over a range,
allow minimum of 2″ from bottom of microwave oven to top of range backg uard
to allow for removal of light covers.
VENTILATION OPTIONS: These microwave o vens are designed for adaptation
to the following three types of ventilatio n:
– Outside exhaust (vertical – as sh own)
– Outside exhaust (horizon tal)
– Recirculating (non-vented ductless – see Filter Kit drawing)
INSTALLATION INFORMATION: This information is not intended to be used for
installing unit described. Before installing, consult installation
instructions packed with product/kit for current dimensional data.
HOOD EXHAUST DUCT : Outside ventilation requires a HOOD EXHAUST DUCT.
Read the following carefully.
EXHAUST CONNECTION: The hood exhaust has been designed to mate with a
standard 3-1/4″ x 10″ rectangular duct. If a round duct is required, a
rectangularto-round transition adaptor must be used. Do not use less than a 6″
diameter duct.
REAR EXHAUST: If a rear or horizontal exhaust is to be used, care should
be taken to align exhaust with space between studs, or wall should be prepared
at the time it is constructed by leaving enough space between the wall studs
to accommodate exhaust.
MAXIMUM DUCT LENGTH: For satisfactory air movement, the total duct length
of 3-1/4″ x 10″ rectangular or 6″ diameter round duct should not exceed 140
equivalent feet.
ELBOWS, TRANSITIONS, WALL AND ROOF CAPS, etc., present additional
resistance to airflow and are equivalent to a section of straight duct which is
longer than their actual physical size. When calculating the total duct
length, add the equivalent length of all transitions and adaptors plus the
lengths of all straight duct sections. The chart below shows the approximate
feet of equivalent length of some typical ducts.
DUCT | EQUIVALENT FEET |
---|---|
A.Rectangular-to-round Transition Adaptor | 5 ft. |
B.Wall Cap | 40 ft. |
C.90° Elbow | 10 ft. |
D.45° Elbow | 5 ft. |
E.90° Elbow | 25 ft. |
F.45° Elbow | 5 ft. |
G.Roof Cap | 24 ft. |
OPTIONAL ACCESSORIES (AVAILABLE AT ADDITIONAL COST)
FEATURES AND BENEFITS
1.9 cu. ft. capacity – 1000 Watts (IEC-705 test proc edure)
Easy clean interior – Makes cleaning spills and splatters a snap Melt feature
– Worry-free melting of butter, caramel, chocolate and cheese
Easy clean with steam clean – Messes inside the microwave are easy to wipe
away after steam loosens food grime
Weight and time defrost – Simply enter the weight of the food, and the oven
automatically sets the optimal defrosting time and power level or set your
desired time for defr osting
Upfront charcoal filter with indicator light – Light indicates when odor-
removing charcoal filter needs to be re placed
Four-speed with boost, 400-CFM venting fan system – Quickly removes smoke,
steam and odors from the cooktop to keep kitchen air fresh and cle an
Turntable with on/off – Controls turntable oper ation
Sensor cooking controls – Automatically adjust time and power for delicious
cooking results
Model JVM7195SKSS – Stainless steel
Model JVM7195EKES – Slate
Model JVM7195FLDS – Black slate
Model JVM7195DKBB – Black
Model JVM719DKWW – White
Model JVM7195EWES – Slate with black accents
Model JVM7195RWSS – Stainless steel with black accents
For answers to your Monogram, Café™, GE Profile™ or GE Appliances
product questions, visit our website at
geappliances.com or call
GE Answer Center® Service, 800.626.2000.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>