GE APPLIANCES RAK27 27 Inch Wall Sleeve Adapter Kit Owner’s Manual
- October 30, 2023
- GE Appliances
Table of Contents
GE APPLIANCES RAK27 27 Inch Wall Sleeve Adapter Kit
Product Information: RAK27 27 WALL SLEEVE ADAPTER KIT
The RAK27 27 WALL SLEEVE ADAPTER KIT is a trim kit designed for the 26 Built-
In Air Conditioner unit. It provides a finished appearance to the installation
and has retrofit capability. The kit is designed for a seamless and true fit,
making it easy to install on the 27 Friedrich Wallmaster sleeves. This opens
up the opportunity to sell and install GE units to over 550,000 Friedrich wall
sleeves. The RAK27 kit includes chassis sealing gaskets for
added convenience.
Specifications
- Color: White
- Width: 27.38 inches
- Height: 16.78 inches
- Depth: 1.25 inches
- Product Weight Net: 2.3 pounds
- Packaged Width: 27.5 inches
- Packaged Depth: 1.34 inches
- Packaged Height: 47.8 inches
- Packaged Gross Weight: 3.6 pounds
Note: GE is a trademark of the General Electric Company. Manufactured under trademark license. GE Appliances has a policy of continuous improvement of its products and reserves the right to change materials and specifications without notice.
Product Usage Instructions
- First, ensure that the 26 Built-In Air Conditioner unit is properly installed in the wall sleeve.
- Take the RAK27 27 WALL SLEEVE ADAPTER KIT out of the packaging.
- Match the RAK27 kit to the 27 Friedrich Wall master sleeve and check if it fits seamlessly and truly.
- If the kit fits perfectly, proceed to install it onto the sleeve by following the instructions provided in the user manual.
- Ensure that the chassis sealing gaskets are installed properly.
- Test the air conditioner unit to ensure it is working correctly.
With these easy steps, you can complete the installation of the 26 Built-In Air Conditioner unit and give it a finished appearance.
RAK27
27″ WALL SLEEVE ADAPTER KIT
The trim kit completes the installation of the 26″ Built-In unit, providing a
finished appearance with retrofit capability.
RAK27
27″ Wall Sleeve Adapter Kit applied to 27” Friedrich Wallmaster Sleeve for
a seamless fit
TRIM KIT INCLUDES:
- 3-sided trim frame
- 1 top gasket
- 2 side gaskets
- 2 rear gaskets
- 6 screws
- 2 edge panel clip nuts
- Installation instructions
The RAK27 Trim Kit is designed for a seamless and true fit, completing the installation of the Built-In Air Conditioner. With easy assembly, it conveniently fits the 27″ Friedrich Wallmaster sleeves — giving the opportunity to sell and install GE units to over 550,000 Friedrich wall sleeves!
- Solid welded thick 19-gauge steel construction
- Color matched white to AJ 26″ Chassis
- Durable powder coat finish
- Includes all gaskets & hardware for a complete and sealed installation
- Locks unit into sleeve for a secure & safe installation
- 1-piece trim design & adhesive gaskets allow for a quick and easy installation
27″ WALL SLEEVE ADAPTER KIT
SPECIFICATIONS|
Color| White
Width| 27.38
Height| 16.78
Depth| 1.25
Product Weight Net| 2.3
Packaged Width| 27.5
Packaged Depth| 1.34
Packaged Height| 47.8
Packaged Gross Weight| 3.6
Includes Chassis Sealing Gaskets
GE is a trademark of the General Electric Company. Manufactured under trademark license. GE Appliances has a policy of continuous improvement of its products and reserves the right to change materials and specifications without notice.
Appliance Park Louisville, KY 40225
geappliances.com
OTGEA22095
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>