ADLER 2271 Hair Dryer User Manual
- June 21, 2024
- ADLER
Table of Contents
ADLER 2271 Hair Dryer
Specifications
- Power: 1500W
- Voltage: 220-240V ~50/60Hz
Product Information
The AD 2271 is a hair dryer with various features designed to provide efficient and customizable hair drying experience. It includes air outlet, concentrator and diffuser magnetic ring, LED display, power switch, mode selection, air speed and cleaning mode adjustment, air filter, temperature setting button, magnetic concentrator, magnetic diffuser, and a convenient pouch for storage.
Product Usage Instructions
Using the Device
- Turn on the device with the power switch (5). The LED displaywill automatically turn on (4).
- Set the desired air speed using the switch (7).
- Important: The hair dryer has a memory function and will start with the last used settings.
Cleaning and Maintenance
- Insert the plug into the socket.
- Remove the air filter cover on the top (3) by pulling it out.
- Turn on the device with the power switch (5).
- Press the air speed and cleaning mode button for 3 seconds (7). The hair dryer will start the self-cleaning function and count down from 10 seconds to 0. It will then resume the last working setup.
FAQ
-
Q: How do I clean the air filter of the hair dryer?
A: To clean the air filter, follow the steps mentioned in the cleaning and maintenance section of the user manual. Remove the air filter cover, activate the self-cleaning mode, and let the hair dryer clean itself. -
Q: Can I adjust the temperature of the air flow?
A: Yes, you can adjust the temperature using the temperature setting button (8) on the device. It offers hot air mode, cool air mode, and interchangeable temperature modes for your convenience.
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ
CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial
purpose.
- Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
- The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
- The applicable voltage is 220-240 V~ 50/60 Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
- Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
- WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
- WARNING: Never use this device close to water, e.g.: under shower, in bathtub, or above sink filled with water.
- WARNING: Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
- WARNING: The temperature of accessible surfaces of an operating device may be high when the equipment is in operation.
- WARNING: Keep the appliance and its cord out of the reach of children.
- WARNING: After you are finished using the device always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
- WARNING: Never use the product close to combustibles.
- WARNING: If using the device in bathroom after use remove the power plug from the socket, because water proximity presents risk, even if the device is turned off.
- WARNING: Do not touch the device with wet hands.
- WARNING: The device has to be turned off after every use.
- WARNING: The equipment must be used in such way that in the extreme position of the power cord it is beyond the reach of a person using a bathtub or shower.
- Do not wrap electric cable around the device.
- Do not use device in the bath.
- Do not remove dust or foreign bodies from the inside of the device using sharp or metal objects.
- Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
- Periodically check the power cord condition. If the power cord is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
- Never use the product with a damaged power cord or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
- The power cord should not touch hot parts of the device and should not be located near other heat sources.
- In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
- Do not allow the motor part of the device to get wet.
- Do not touch the hot surfaces of the device.
- After turning off the appliance, before cleaning or storing it, disconnect the power plug from the socket and allow the equipment to cool down. Please wait long enough because the heated device cools down slowly.
- Do not use aggressive detergents in the form of emulsions, milks, pastes, etc. to clean the housing, as they may, among other things, remove informative graphic symbols such as scales, markings, warning signs, etc.
- The device is not designed to work with external schedulers or separate remote control system
- Do not cover the device, it might cause the accumulation of heat in its interior and it may cause damage or fire.
- Hairsprays contain flammable materials. Do not apply them while using the device.
- Do not use the device on people who are sleeping.
- During operation, do not place the device on wet surfaces or clothes.
- During operation of the device, metal elements heat up to high temperatures. Do not touch hot parts of the device with your bare hands and do not allow contact with the scalp, as this may result in burns.
DESCRIPTION OF THE DEVICE
- Air outlet
- Concentrator and diffuser magnetic ring
- Air filter (top)
- LED display
- Power switch
- Mode
- Air speed and cleaning mode
- Temperature setting button
- Air filter (handle)
- Magnetic concentrator
- Magnetic diffuser
- The pouch
DESCRIPTION OF THE
DISPLAY
- Hot air mode
- Cool air mode
- Interchangeable temperature mode
- Low speed / breeze (flashing)
- Medium speed
- High speed / turbo (flashing)
- IONIC (always on)
- Temperature display
USING THE DEVICE
Turn on the device with power switch (5). The LED display will turn on
automatically (4).
Set the desired mode with the switch (6):
1 – hot air, 2- cool air, 3 – interchangeable temperature (hot & cold), 4 – breeze (press for 3 seconds)
Interchangeable temperature mod e – prevents from burning the scalp if
you don’t want to move your hair dryer. It dries hair without harm for the
scalp. You can set up temperature and the air speed in this mode.
Breeze mod e – temperature is maintained at 50°C temperature and the
gentle breeze is blowing. It helps to absorb nutrients from the hair care
products.
Set the desired air speed with the switch (7):
- high speed,
- mid speed,
- low speed
Set the desired temperature with the buttons (8):
50°C/ 60°C/70°C/80°C/90°C/100°C, turbo mode (press for 3 seconds)
NOTE: Temperature increase decrease function can only be adjusted in the
hot air mode and interchangeable temperature mode
Turbo mode – temperature reaches maximum temperature 120°C and maximum speed.
It allows to quick dry the hair.
IMPORTANT: Hair dryer has memory of the last set up. It will switch on to the last used set up.
CLEANING AND MAINTENANCE
Intelligent self cleaning
- Insert the plug into the socket.
- Remove the air filter cover on the top (3) by pulling it out.
- Turn on the device with power switch (5)
- Press air speed and cleaning mode button for 3 seconds (7). Hair dryer will start self-cleaning function and will count down from 10 seconds to 0. Then it will stop and start the last working set up.
Manual cleaning
- Disconnect the device from the power outlet.
- Remove the air filter cover that is on the top (3) of the hair dryer by pulling it out.
- Take off the air filter cover that is on the handle (9) of the hair dryer by twisting it off.
- Clean both filters regularly from loose hair or other dust using the lint-free cloth or a soft brush.
- Dirty housing clean with wet soft cloth, then wipe to dry. Do not use any aggressive detergents.
- Avoid any liquid to reach inside the hair dryer.
TECHNICAL DATA Power: 1500W
Voltage: 220-240V ~50/60Hz
To protect your environmen t: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the common waste bin.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>