ADLER EUROPE AD 4508 Knife Sharpener User Manual

: June 1, 2024
: ADLER EUROPE

Table of Contents

AD 4508
- user manual
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AD 4508

user manual

ADLER EUROPE AD 4508 Knife Sharpener 1

SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

The warranty conditions are different, if the device is used for commercial purpose.

Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
The applicable voltage is 230V~ 50Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
Never use the product close to combustibles.
Do not let cord hang over edge of counter or touch hot surfaces.
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
Avoid contact with moving parts.
Unplug from the outlet when not in use, before cleaning and before attempting to adjust parts.
The appliance must not be used near water or other liquids.
Only for use on straight edges. Not for use on scissors or serrated edges.
Do not run fingers along the blade of the knife to check for sharpness.
Never insert the tip of the knife into the slot first and push through. This could damage the knife sharpener and your blade.

DESCRIPTION OF DEVICE

Reshaping slot
Fine honing slot
ON/OFF Switch
Feet
Hatch with magnet

USE OF DEVICE

Place the device on a flat surface. Moisten the suction a little to keep the unit firmly in place on the counter.
Insert the heel of the blade sequentially in both slots of the sharpening section (1), on the left side of the device. Insert the blade of the knife into the reshaping slot (1) and move the blade in both directions parallel to the table surface, at first the left and then the right-hand part of the sharpening slot (1). Slightly lift up on the knife handle as the curved portion near the tip is drawn through the grinding wheels. Repeat until the knife blade is sharp enough.
Insert the heel of the blade sequentially in both slots of fine honing section (2), on the left side of the device. Insert the heel of the blade into the fine-honing slot (2) and move the blade in both directions parallel to the table surface, at first the left and then the right-hand part of the fine-honing slot (2). Slightly lift up on the knife handle as the curved portion near the tip is drawn through the grinding wheels. Repeat until the knife blade is sharp enough.
After sharpening clean the knife in hot water and detergent.

CLEANING AND MAINTENANCE

Unplug from the outlet when not in use, before cleaning, and before attempting to adjust parts. Clean the outside surface of the appliance with a damp cloth. Never immerse this appliance in water or other liquids in order to clean it. Do not insert the device into the water in order to clean it. Empty the hatch (5) where the metal filings gather and are collected during work.

TECHNICAL DATA

Power supply: 220-240V~ 50/60Hz
Power: 40W
Max. power: 60W

To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Electrical appliance must be returned in order to reduce its reuse and utilization. If the device contains batteries they should be delivered to dedicated points separatelly.

| | |
---|---|---|---
ELECTRIC KETTLE CR 1290| ESPRESSO MACHINE CR 4410| SANDWICH MAKER CR 3054|

RETRO RADIO CR 1182

MEAT MINCER CR 4812

Trimmer CR 2921

HEATED ANIMAL DEN CR 7431

www.camryhome.eu

AFTER SALE SERVICE NOTICE

If you want to buy spare parts or make any complaints, please contact the seller who issued the receipt directly.