ADLER EUROPE AD 7709 Halogen Spotlight User Manual
- May 15, 2024
- ADLER EUROPE
Table of Contents
ADLER EUROPE AD 7709 Halogen Spotlight
Product Information
Specifications
- Voltage: 220-240V ~50/60Hz
- Power: 800W (400+400)
Product Usage Instructions
Safety Instructions
IMPORTANT INSTRUCTIONS ON SAFETY OF USE: Please read carefully and keep it for future reference.
- Do not use this heater in small rooms where there are people who are unable to leave by themselves unless constant supervision is ensured.
- To reduce the risk of fire, keep textiles, curtains, or other flammable materials at least 1 meter away from the heater air outlet.
Description
- Switches of the mode / switch-key
- Immersion heaters
- Protecting net
- The fuse of the vertical position
Note: The first time you may experience a smell of burning which is normal and should disappear after a short time.
- Turn on the power cord into an electrical outlet.
- Select the operation mode of the heater with switches:
- I – Enabled switch 400W
- I + II – Enabled switch 800W
FAQ
- Q: What should I do if I smell burning when using the heater for the first time?
- A: The smell of burning during initial use is normal. It should dissipate after a short period. If the smell persists or worsens, discontinue use and contact customer service.
Introduction
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ
CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different if the device is used for commercial
purposes.”
- Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
- The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
- The applicable voltage is 220-240V, ~50/60Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
- Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device use it without supervision.
- WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.
- After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
- Never put the power cable, the plug or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc. Never use the product in humid conditions.
- Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced to avoid hazardous situations.
- Never use the product with a damaged power cable if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
- Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
- Never use the product close to combustibles.
- Do not let the cord hang over the edge of a counter or touch hot surfaces.
- Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, and unplug the power.
- To provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating of not more than 30 mA. Contact a professional electrician in this matter.
- Never use this device close to water, e.g.: under the shower, in the bathtub, or above a sink filled with water.
- If using the device in the bathroom after use remove the power plug from the socket, because water proximity presents a risk, even if the device is turned off.
- Do not put your fingers or any objects through the ventilation grille
- Do not place any objects on the convector. The vents must not be covered by a towel, curtain, etc. may cause a malfunction or fire.
- Keep the distance between the convector and other items such as furniture, and curtains.
- Convector is equipped with a device to prevent overheating. Automatically turns off the convector in the event of excessive temperature convector (due to clogged vents, or fan malfunction ). In this case, disconnect the unit from the power supply, waiting a few minutes and remove the cause of overheating,
- Do not touch the hot parts of the convector. Do not touch the appliance with wet hands.
- In the case of a wet convector or falling of any object through the ventilation grille of the convector, turn it off immediately and disconnect from the network. Before re-use with the convector call for service.
- Do not place the convector directly below the electrical outlet.
- Always turn off the convector button before disconnecting it from the mains.
- Do not use this heater near a bathtub, shower or swimming pool
- Do not use this heater if it has been dropped
- Do not use if there are visible signs of damage to the heater
- Use the heater on a level and stable surface or attach it to the wall, if provided for by the manufacturer
WARNING: Do not use this heater in small rooms where there are people who
are unable to leave them by themselves unless constant supervision is ensured.
WARNING: To reduce the risk of fire, keep textiles, curtains or other
flammable materials at least 1 m away from the heater air outlet.
DESCRIPTION
- Switches of the mode / switch-key
- Immersion heaters
- protecting net
- The fuse of the vertical position
Note: the first time you can receive the smell of burning.
This is normal, and after a short time, the smell should disappear.
- Turn on the power cord into an electrical outlet.
- Select the operation mode of the heater with switches (1):
- I – Enabled switch 400W
- I + II – Enabled switch 800W
CLEANING AND MAINTENANCE
- Never immerse the device in water.
- Wipe the exterior walls with a damp cloth.
TECHNICAL DATA
- Voltage: 220-240V ~50/60Hz
- Power: 800W (400+400)
To protect your environment: please separate carton boxes and plastic bags and dispose of them in corresponding waste bins. Used appliances should be delivered to the dedicated collecting points due to hazarsous components, which may affect the environment. Do not dispose of this appliance in the common waste bin.
- This product is suitable only for occasional use or for use in well-insulated room.
- DO NOT COVER« INSCRIPTION IMPORTANCE The inscription on the device means that the device is not to be covered with clothing, blankets and other textile products which could cause ignition.
Read User Manual Online (PDF format)
Loading......