ADLER AD 7815 Oil Radiator User Manual

: May 15, 2024
: ADLER

Table of Contents

ADLER AD 7815 Oil Radiator
Product Information
Product Usage Instructions
Model Identifier
IMPORTANT SAFETY INSTRUCTIONS
DESCRIPTION OF THE DEVICE
ASSEMBLY
USING THE DEVICE
CLEANING THE DEVICE
TECHNICAL DATA
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ADLER AD 7815 Oil Radiator

ADLER-AD-7815-Oil-Radiator-product

Product Information

Specifications

Model: AD7815 / AD7816 / AD7817 / AD7818 / AD7819
Heat Output: 0.4535 – 0.9761 kW
Control Type: Manual heat charge control with integrated thermostat
Room Temperature Control Options: Mechanical thermostat, electronic room temperature control, day timer, week timer
Additional Control Options: Presence detection, open window detection, adaptive start control, working time limitation

Product Usage Instructions

Installation

Place the heater on a level and stable surface or attach it to the wall following the manufacturer’s instructions.
Ensure proper ventilation around the heater for efficient operation.

Operation

Set the desired heat output using the manual heat charge control.
Select the room temperature control option based on your preference.
If applicable, program the day or week timer for automated temperature control.
Monitor the heater for any visible signs of damage and discontinue use if detected.

Maintenance
Regularly clean the heater and ensure all controls are functioning properly. Contact the manufacturer for any servicing needs.

FAQ

Q: Can I use this heater near water sources like a bathtub or swimming pool?
A: No, it is not recommended to use the heater near water sources for safety reasons.
Q: How do I know if the heater is damaged and should not be used?
A: If there are visible signs of damage to the heater, such as cracks or exposed wires, do not use it and contact the manufacturer for assistance.

Model Identifier

Model identifie r AD7815 / AD7816 / AD7817 / AD7818 / AD7819|
---|---
Item| Symbol| Value| Unit| | Item| Unit

Heat output / Moc cieplna

0,8274 /

0,9003 /

0,9543 /

0,9761

| kW| | manual heat charge control, with integrated thermostat| [no]

Minimum heat output (indicative)

|

P min

| 0,4535 /

0,4567 /

0,5537 /

0,5565 /

0,6378

|

kW

| | Manual heat charge control with room and /or outdoor temperature feedback| [no]
Maximum continuous heat output|

Pmax,c

| 0,7001 /

0,8274 /

0,9003 /

0,9543 /

0,9761

|

kW

This product is suitable only for occasional use or use in well-insulated rooms.

IMPORTANT SAFETY INSTRUCTIONS

SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

The warranty conditions are different if the device is used for commercial purposes.

Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
The applicable voltage is 220-240V, ~50/60Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
Please be cautious when using around children. Do not let the children play with the product. Do not let children or people who do not know the device use it without supervision.
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory, or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
Never put the power cable, the plug, or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc. Never use the product in humid conditions.
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced to avoid hazardous situations.
Never use the product with a damaged power cable if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
Never use the product close to combustibles.
Do not let the cord hang over the edge of a counter or touch hot surfaces.
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, and unplug the power.
Never use this device close to water, e.g.: Under the shower, in the bathtub, or above a sink filled with water.
The heater should be placed on a level, heat-resistant surface, away (at least one meter) from flammable materials (lace curtains, curtains, wallpaper, furniture, etc.).
The power cable should not be placed above the heater, and also should not touch or lie close to hot surfaces. Do not place the heater under an electrical outlet.
The surface of the heater can heat up to high temperatures of over 60 degrees C. Take care when near the heater.
Do not cover the heater with curtains, or a towel or hang washing on it – this can damage the heater or cause a fire.
When using the heater, completely unwind its cable and make sure that the cable is not touching the hot surface of the heater.
Do not use the heater near basins, showers, sinks, pools, or other places where it can get wet.
The device must be completely cool before storage. Keep the original packaging to store the heater in during non-heating seasons.
The heater is filled with a set amount of special oil. Repairs requiring the opening of the oil container must be carried out only by the manufacturer or authorized representative, who should be contacted if oil leaks from the heater.
If disposing of the heater please follow the rules of oil disposal.
WARNING: To avoid overheating do not cover the heater.
Do not use this heater near a bathtub, shower, or swimming pool
Do not use this heater if it has been dropped
Do not use if there are visible signs of damage to the heater
Use the heater on a level and stable surface or attach it to the wall, if provided for by the manufacturer
- WARNING: Do not use this heater in small rooms where there are people who are unable to leave them by themselves unless constant supervision is ensured.
- WARNING: To reduce the risk of fire, keep textiles, curtains, or other flammable materials at least 1 m away from the heater air outlet.

DESCRIPTION OF THE DEVICE

DESCRIPTION OF THE DEVICE (Fig. 1) – Oil-filled radiators

1. Diode indicating operation of the device
Thermostat control knob
Power level control knob 0/I/II/III
Cable storage
Wheels
Ribs

ADLER-AD-7815-Oil-Radiator-fig-1

ASSEMBLY

(Fig. 2)

Turn the heater upside down.
Place the wheelbases between the last ribs.
Use the U-shaped clamp to hook the bases.
Block the clamp by screwing on the butterfly nut.
Place the heater on the wheels.

CAUTION:
After turning the heater, wait at least one hour before connecting it to a power outlet.

ADLER-AD-7815-Oil-Radiator-fig-2

USING THE DEVICE

CAUTION:
During the first use of the heater, a small amount of smoke may appear. This is normal.

Place the oil heater a minimum of 100 cm from walls, furniture, curtains, plants, etc.
Make sure that the on-switch control knob (3) and thermostat control knob (2) are set to ‘0’. Connect the oil heater to mains power.
Turn the heater on by turning the on-switch control knob (3) to position I (low heating power) or II (middle heating power) or III (high heating power). Set a comfortable oil heater temperature by turning the thermostat control knob.
After you finish using the heater, turn it off by turning the on-switch control knob and thermostat control knob to ‘0’ and disconnect the power cable from the mains power.

CLEANING THE DEVICE

Before cleaning always remove the plug from the electrical outlet.
Before cleaning allow the heater to cool. Make sure that it is cool.
Wipe the heater with a damp cloth, then wipe dry.
Never use wax, shining agents or chemical agents to clean the heater. They may react with the device and cause discoloration or even damage.

TECHNICAL DATA

Power source: 220-240 V~50/60 Hz
Power:
- AD7815 – 1: 600 W 2: 900 W 3: 1500W
- AD7816 – 1: 800 W 2: 1200 W 3: 2000W
- AD7817 – 1: 1000 W 2: 1500 W 3: 2500W
- AD7818 – 1: 1000 W 2: 1500 W 3: 2500W
- AD7819 – 1: 1000 W 2: 1500 W 3: 2500W

To protect your environment: please separate carton boxes and plastic bags and dispose of them in corresponding waste bins. Used appliances should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Electrical appliances must be returned to reduce their reuse and utilization. If the device contains batteries they should be delivered to dedicated points separatelly.