imoshion Bedrade Gaming Muis Wired Gaming Mouse Instruction Manual
- June 16, 2024
- imoshion
Table of Contents
imoshion Bedrade Gaming Muis Wired Gaming Mouse
Congratulations on purchasing the imoshion gaming mouse! This product is an
easy to use gaming mouse.
This manual provides information about the specifications and safety
instructions and will help you set up and use the mouse.
Specifications
7D Buttons DPI 800 – 1600 – 2400 – 3200 –4800
RGB Lights 13 RGB Light modes
Wire 1.5 meter braided wire
Rated Voltage 5V
Rated Current 100MA
System requirements
- System compatible with one USB port.
- Windows 7 or newer if using on Windows.
Please note that some functionalities are not available on MacOS
Safety precautions
- Please do not take apart or exchange any component.
- Please do not put the product into water or any other liquid as this mouse is not waterproof.
- Please turn off the mouse and disconnect with the connected device if any liquid comes into contact with the mouse.
- Please make sure that the hands are dry when installing or when using the mouse to avoid an electrical shock.
- Please do not expose the mouse to extreme temperatures or fire.
Set up instructions
- Connect the USB to the USB port of the computer.
- The mouse will install itself.
- The mouse is connected to the computer and can be used.
- Press the DPI button below the scroll wheel to change the sensitivity of the mouse.
- Press the Light button below the DPI button to change the lighting scheme.
Troubleshooting
If the mouse is not working correctly, please consider the following steps:
- Please move the mouse and click the buttons a few times.
- Please check if the USB is properly inserted into the computer.
- Please disconnect and reconnect the mouse to the computer.
- Please restart the computer
Disposal instructions for users
In accordance with Article 14 of Directive 2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE).
The symbol of the crossed-out wheel bin on the device indicates that the
product must be disposed of separately from other waste at the end of its
service life. Depending on national regulations, the product can be deposited
at a waste disposal center specialized in the separate collection of waste
electrical and electronic equipment, or returned to obligated takeback
distributors.
By correctly separately collecting electrical and electronic equipment, you make a valuable contribution to avoiding negative effects on people and the environment and promoting the recycling and reuse of parts and raw materials from which the device is made.