VOLCORA V-HHBS-A1B Wireless Handheld Barcode Scanner with Base User Guide
- June 3, 2024
- VOLCORA
Table of Contents
VOLCORA V-HHBS-A1B Wireless Handheld Barcode Scanner with Base
COUNTRY KEYBOARD LAYOUT
Note: Keyboard layouts vary from country to country. The default setting is the U.S. keyboard.
Common settings
sYSTEM SETTINGS
TERMINATOR SUFFIX
Note 1: How to use the setting barcode: You only need to find the barcode
with the required function in the setting barcode and scan it once. If the
buzzer beeps, it indicates that the scanning is successful.
Note 2: For additional information on using the scanner, please contact
the vendor for a complete user manual.
Wireless Mode
For scanner with 2.46 wireless function. Wireless 2.4G mode supports windows,
Mac Os, Linux, Unix, Android and other systems thourgh dongle.
Step 1: Scan 2.46 wireless mode barcode. Scanner will pair with previous
dongle by default.
2.4G Wireless Mode
Step 2: Scan Quick Pair barcode. The indicator light will flicker
Quick Pair
Step 3: Plug in the dongle with the host device (within 60 seconds). If paired successfully, you will hear a beep and the indicator light is always on.
Step 2: Scan the Quick Pair barcode. The barcode scanner indicator light flashes rapidly and enters the Bluetooth HID pairing state.
Quick Pair
Step 3: Search for and select the Bluetooth device “Barcode Scanner-HID” on the host device. If paired successfully, you will hear a beep and indicator light flashes.
Step 2: Search and select the Bluetooth device Barcode Scanner SPP or Barcode Scanner BLE on the host device. If pair successfully, you will hear a beep and the indicator light is always on.
Troubleshooting
Serial
NO .
| Problem| Po ss ible Cau ses| Solution
---|---|---|---
1
|
Unable to connect device
| Scanner batt ery is low| Check the batt ery before use and then connect
Did not follow the
connection steps
|
Please follow the filesteps for configuration settings
2
|
Seanner does
no t decode
barcodes
| This type of symbology is not enabled|
Enabl e the symbology by scanningsettingbarcode.
The Barcode is defaced| Scan other barcodes of the
same barcode type
The Barcode is defaced| Scan other barcodes of th e same barcode type
3
|
Host displays scanned data incorrectly
| Host Input method is not matching|
Setup English keyboard on host
Other settings have been made to the scanner
| Restore the scanner parameters to th e factory settings or contact your barcode scanner vendor
4
|
Host displays scanned data incorrectly
| The scanner’s keyboard languageis not same as the host keyboard language|
Make sure that the PC or smartphone keyboard language is the same as barcode scanner language
5
| Scanner is not readingany barcode| Device conversion error| Restart the scanner and restore it to factory defaul t
Notice
- Don’t disassemble the protective cover by yourself to avoid direct beams of light to your eyes.
- Prohibit disassembly, impact, etc. If there is serious welling, please don’t continue to use.
- If it needs to be disassembled, adjusted or repaired, please refer to professionals.
- Don’t expose the device to high temperature
Certificate
After testing, this product meets our standards
Product Warranty Card
Name
| I TEL| | ZIP I
C ODE
---|---|---|---
Pu rc h ase Date| | Product Name
& M odel
|
Address|
Maintenance Record
Date
|
Maintenance Content
| R e pla c e Part s|
Rep a i rm an
---|---|---|---
Name
|
Quantity
| | | |
| | | |
| | | |
| | | |
Model: V-HHBS-AIB
Dear Users:
Thank you for choosing our products. We will provide you with
high-quality products and considerate services. For better use of
this product, please read this manual carefully before use.
FCC STAMANENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment. This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet the general RF exposure requirement
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>