ATOMSTACK F60 Air Assist Kit User Manual
- June 13, 2024
- ATOMSTACK
Table of Contents
ATOMSTACK F60 Air Assist Kit
Product Information
Specifications:
- Model: F03-0058-0AA1
- Version: A
- Color: White
Product Usage Instructions
Precautions for Use:
- Avoid using the red range for extended periods as it may impact the air pump’s lifespan.
- Ensure the tube is not obstructed by wheels and avoid excessive bending that could lead to blockages.
- Do not bend the tube excessively as it may cause pump damage due to blockages.
Components:
- Speed adjusting (switch) knob
- Tube interface
- Power interface
Usage Instructions
- Connect the tube to the tube interface securely.
- Connect the power interface to a suitable power source.
- Adjust the speed using the speed-adjusting knob as needed.
- Avoid sharp bends in the tube to prevent blockages and potential pump damage.
- Keep the tube clear of any obstructions to ensure proper airflow.
FAQ
Q: Can I use the red range occasionally?
A: It is recommended to primarily use the white range to ensure the longevity of the air pump. Occasional use of the red range should be fine, but prolonged use may impact the pump’s lifespan.
Q: How do I know if the tube is blocked?
A: If you notice a significant decrease in airflow or unusual noises from the pump, it may indicate a blockage in the tube. Check for bends or obstructions in the tube and clear them if necessary.
Q: What should I do if the pump burns out?
A: If the pump burns out due to blockages caused by excessive bending of the tube, it may need to be replaced. Avoid bending the tube too much to prevent such issues in the future.