KILLER CUSTOM STSLIM8 Harley Davidson 4 Inch Stretch Softail Rear Fender with Tip Instruction Manual
- October 30, 2023
- KILLER CUSTOM
Table of Contents
Instruction Manual Harley-Davidson 4″ Stretch Softail Rear Fender
With Tip 2000-2022
STSLIM8, ST-4M8,
ST-4-00-17, STSLIM-12-17
ASSEMBLY INSTRUCTIONS
These parts are handmade of fiberglass come with a black gelcoat finish. This
coating is not final use coating and will need to be top -coated (such as
paint) for final use. Minor surface imperfections and scuffs are normal and
may happen during taking parts out of the mold and shipping. This is allowable
as the coating will need to be scuffed for final top-coat preparation.
For questions pertaining to the installation of this product, please contact
our Killer Custom technical department at
info@killercustom.com. This product is
manufactured in Europe by Killer Custom
NOTE: Killer Custom assumes no responsibility or liability for damage or injury of any kind arising out of the use or misuse of any products.
- Check all clearances before, during, and after installation. Warning: check the fitment of all parts before painting!
- Remove the OEM seat from your motorcycle. Note that our 4″ Stretch Softail Rear Fender is designed to use with the original seat.
- Remove the original rear fender from the motorcycle. Note that original struts and rear turn signals can be used with our fender, but you have to relocate the rear taillights and the license plate.
- There are predrilled holes on the fender, in some cases you may need to adjust the holes’ shape or position.
- Put the rear fender on the motorcycle the same way as the original one. Use the OEM bolting. The installation is finished.
- After the installations test drive the bike to be sure everything is working perfectly.
NOTE:
- Installation of this kit requires detailed knowledge of the motorcycle model and mechanics. It is assumed that the installer has access to the proper tools and a working knowledge of them, and factory service manuals.
- Before painting the parts, first, you have to put those on the motorcycle and make sure that everything is adjusted and fits perfectly. Killer Custom will not be responsible for any fitment issues after paint.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>