ATOMSTACK B09SWSB98V Y-axis Extension Kit Instruction Manual
- June 4, 2024
- ATOMSTACK
Table of Contents
ATOMSTACK B09SWSB98V Y-axis Extension Kit
Instruction Manual
- Remove the two Y-axis profiles from the original engraver.
- Install the extended Y-axis profiles.
- Modify Y-axis travel parameters.
- Open the LaserGRBL software and connect to the engraver.
-
Expand Grbl, select Grbl Configuration.
-
Locate item $131 and modify the original Y-axis Maximum travel value 400 to 850.
- Click Write to enter the modified parameter.
- Close the window when the modification is done
- This is a general manual. If your machine is an A5 PRO purchased before 2022, the modified data may be restored to the original value after you are back online. In this case, please scan the QR code below to get the firmware update and firmware update tutorial.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>