Govee B7080 RGBW LED Rock Lights User Manual

User Manual

Model:B7080
RGBW LEDAF$pclicLitAtme

Safety Instructions

Read and follow all the safety instructions:

• Be cautious of static electricity during installation and Keep the product away from sharp objects or strong corrosive chemicals.
• Remove nails, metal, or other conductive objects from the installation surface before attaching the rock lights, as it may cause short-circuiting.
• Do not install the rock lights near any heat sources.
• Do not allow children to install the rock lights alone.

Introduction

Thanks for choosing the Govee RGBW Rock Lights. This product is a car exterior light that has RGB and warm white lighting color. You can make your car show incredible colors by controlling each rock light individually via the Govee Home app.

What You Get

LED Rock Lights|
---|---
Control Box| 1
User Manual| 1
Service Card| 1

At a Glance

Installing Your Device

Before You Install

1. Unpack the box and check all items listed in the packing list.
2. Power on the rock light and check whether it lights up.

Installing Steps

1. Place your car on a car lift or a suitable trench.
2. Plan a suitable position for the rock lights. Connect the wires to the control box to ensure the length is appropriate, and then tighten the waterproof connector.
3. Drill the holes on the chassis in the planned position. Attach the rock lights to the chassis and then tighten up with the provided screws.
4. Connect the control box to the car’s battery. Ensure the red wire connects to the positive terminal and the black wire to the negative terminal.
5. Switch on the control box to start using the rock lights

**Pairing Your Device with the Gove

Home App**

Pairing Instructions

1. Download the Gove Home app from the App Store (i0S devices) or Google Play (Android devices).
2. Turn on Bluetooth on your smartphone.
3. Open the app, tap the “+” icon in the top right corner and search for “B7080”.
4. Tap the device icon and follow the on-screen instructions to complete the pairing.

Specifications

Troubleshooting

1. The rock lights do not turn on.

• Ensure the power is connected and the switch is turned to ‘ON’.
• Ensure the connection between the rock lights and the cable is stable.

Non-replaceable light source.
Not intended for illumination. Only used for creating ambiance.

1. Do not connect the rope light to the supply while it is in the packing or wound onto a reel;
2. Do not use the rope light when covered or recessed into a surface;
3. Do not open or cut the rope light;

Responsible party :

Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
Email: support@govee.com
Contact information: https://www.govee.com/support

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen Intellirocks Tech. Co., Ltd. is under license.
Gove is a trademark of Shenzhen Intellirocks Tech Co., Ltd.
Copyright ©2021 Shenzhen Intellirocks Tech Co., Ltd. All Rights Reserved.

https://www.govee.com/apps/qrcode
Gove Home App
For FAQs and more information,
please visit: www.govee.com

Cannot connect to Bluetooth.

• Do not skip the Bluetooth connection in the app.
• Ensure Bluetooth on your smartphone has been turned on.
• Your smartphone may be incompatible with the Govee Home app. Try using a different smartphone, then
• Power the rock lights and your smartphone Bluetooth off and on, then try again.
• Ensure that your smartphone is within 1 m/3.28ft of the rock lights when connecting.
• Clear any obstructions that are between the rock lights and your smartphone.

Customer Service

Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: support@govee.com
Official Website: www.govee.com
@Govee
@govee_official
@govee.official
@Goveeofficial
@Govee.smarthome

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>