DCU TECNOLOGIC 34152515 ANC True Immersive Bluetooth Headphones User Manual

TRUE IMMERSIVE NOISE CANCELLATION HEADPHONES

IN THE BOX

POWER ON CONNECT

Power on and automatically enter pairing mode

• To enter pairing mode again, power off and then hold Power Button for 5 seconds

VOICE PROMPTS
Power ON
Pairing
Connected
Battery Full: 100%-80%
Battery Medium: 70%-30%
Low Battery: less than 20%

CONTROL

ANC ON
blocks out external sounds
LOW LATENCY ON
real-time audio sync while gaming or watching video

MULTI-POINT CONNECTION

maximum 2 devices

1. Once FIRST device is connected, turn off Bluetooth in device settings. Headphone will auto enter Bluetooth Pairing.
2. Enter your SECOND device Bluetooth settings and connect to headphone
3. Enter your FIRST device settings.
   Turn on Bluetooth and reconnect to headphone

CHARGING

RESET

Please make sure you forget “DCU_ANC_Headphones” from your Bluetooth device settings before resetting

1. When Power is off, press and hold the power button for 5seconds until the light flashes blue and red
2. Keep holding +/- buttons simultaneously for 10seconds until you see the red light flashing 3times and turn solid red for 2seconds. Headphone power OFF automatically

Please read this manual carefully before use.
Safety warnings
Do not place any naked flame sources, such as lighted candles
Dispose of batteries responsibly and be aware of the environmental effects of battery disposal
Do not expose the batteries (batteries installed) to excessive heat, such as fire or the like
Warning
To prevent possible hearing damage, do not listen at high volume levels for long periods.
For your own safety, please be aware of your surroundings when using these headphones.

http://www.dcutec.com/videos/yt/34152515
DCU Tecnologic customer service
c/ Industria 34, 17005-Girona (Spain)
T.: +34 972244105
Email: info@dcutec.com
www.dcutec.com

References

• DCU Tecnologic

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>