HP X7N07A Sprocket Portable Photo Printer User Manual

: June 10, 2024
: HP

Table of Contents

HP X7N07A Sprocket Portable Photo Printer
Parts and Controls
Getting Started
Navigating the App
Supplied Items
Product Overview
Getting Started
Navigating the App
Safety Information
Specifications
Troubleshooting
FAQ’s
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HP X7N07A Sprocket Portable Photo Printer

Parts and Controls

Supplied Items
Product Overview
LED Indicator Lights

Getting Started

Installing Mobile App
Charging Battery and Powering On
Loading Paper
Pairing Device and HP Sprocket Photo Printer
Caring for your HP Sprocket Photo Printer

Navigating the App

Home Screen and Menu Navigation
Browse Photo Galleries
Take or Select a Photo
Set up Social Media Sources
Edit, Print, and Share a Photo

Supplied Items

HP Sprocket Photo Printer
Setup Card
HP ZINK® Sticky-Backed Photo Paper (10 sheets)
USB charging cable
Regulatory Information Sheet

Product Overview

Power Button
Status Indicator LED Light
Charging Indicator LED Light
Charging Port
Reset Button
Top Cover
Paper Output Slot
Paper Input Tray (not visible from the exterior)
Lanyard Notch $HP -Sprocket -X7N07A -Portable Photo -Printer-fig $2$$

LED Indicator Lights : Status Indicator and Charging Indicator

LED Color HP Sprocket Condition Description

White

Right LED indicator

| Idle/On| Powered on and waited for the print job. The device defaults to power down after 5 minutes without use. This can be changed in the sprocket menu.
Red

Left LED indicator

| Charging| Connected to power. LED will turn green upon full charge. The printer can be used while charging.
Green

Left LED indicator

| Fully charged| The device is fully charged.
White, Blinking

Right LED indicator

| Powering on/Receiving print job| LED flashes white when powering on and when

receiving a print job.

Red, Blinking

Right LED indicator

| Printer error| When a print error occurs, the LED will flash red.

Wait for the light to turn white to send a print job.

Getting Started

Installing Mobile App

To use your HP Sprocket Photo Printer printer, you must download the companion HP Sprocket Photo Printer app from the App Store® or on Google Play™. To download the Sprocket app, visit hpsprocket.com. There, you will be directed to the appropriate app store for your device.
The Sprocket app is supported by Android™ devices using OS v4.4 and above and iPhone® iOS 8 and above.
You must install the companion Sprocket app to operate the HP Sprocket Photo Printer.
If your phone has NFC capabilities, you can also pair your device and printer by tapping your mobile device or tablet on the top of your HP Sprocket Photo Printer. This will direct you to hpsprocket.com to install the Sprocket app.

Charging Battery and Powering On

To charge, insert the micro-USB charging cable into the HP Sprocket Photo Printer.
Connect the USB cable to a charging adaptor (not included) and plug into a power outlet.
When successfully connected, the LED indicator light will turn red to indicate charging.
To charge fully, allow 60-90 minutes, or until the LED changes to green.
Turn on your printer by pressing and holding the Power button until the LED indicator turns white.
Turn off the printer by pressing and holding the Power button until the white LED indicator goes dark.

Loading Paper

Take off the Top Cover by sliding it slightly forward and away from the Paper Output slot. This will release the lid and allow you to lift off the Top Cover to insert paper.
Unwrap a pack of HP ZINK® Sticky-Backed Photo Paper (10 sheets). Make sure the included blue Smartsheet® is on the bottom of the stack, barcode and logo facing down. Stack the photo paper on top of the Smartsheet® with the HP logos facing down also
Place both the paper and the Smartsheet® into the Paper Input Tray.
Return the Top Cover to the printer by aligning it in the cutout edge of the open top and then sliding the cover closed. It will click into place and attach securely when fastened.

Caution:

Do not insert more than 1 pack of HP ZINK® Sticky-Backed Photo Paper (10 sheets plus 1 Smartsheet®) into the printer at a time to avoid paper jams or print errors.
Only use HP ZINK® Sticky-Backed Photo Paper with the printer to avoid paper jams and malfunctions.
You can purchase additional paper within the Sprocket app by tapping “Buy Paper” in the Main Menu.
In the case of a paper jam, do not pull on the paper. Instead, turn the printer off and on again to automatically eject the paper.
Do not pull the paper out of the printer during printing.
If spills or moisture collect on a photo, wipe it away as soon as possible to prevent color damage.
Keep photo paper clean and free of bends or damage for best print quality

Pairing Mobile Device and HP Sprocket Photo Printer

For Android™

Press and hold the Power Button for 3 seconds to turn on the printer. The LED will flash white as the printer powers on and remain solid white once fully powered on.
Be sure Bluetooth is turned on for your mobile device or tablet, and then open the Sprocket app. Select the Main Menu in the upper left-hand corner.
Tap sprocket to pair your printer with your mobile device or tablet. A pop-up message will direct you to Android™ Settings to pair your printer. A list of available devices will display.
Select your printer from the list to pair your devices.

For iPhone®

Press and hold the Power Button for 3 seconds to turn on the printer. The LED will flash white as the printer powers on and remain solid white once fully powered on.
Open iPhone® Settings and select Bluetooth. Turn Bluetooth on and then select the printer from the listed devices.
Next, launch the Sprocket app. See “Installing Mobile App” for more information.
- A reminder message will appear if you try to print a photo and are not paired with your HP printer.
- If your mobile device and printer will not pair, try resetting the printer. For instructions, see FAQ “How do I reset my printer?”

Caring for your HP Sprocket Photo Printer

Remove fingerprints, dust, and dirt from the printer using a dry microfiber cloth.
Keep the top cover on to prevent dust and debris from entering the paper path.

Navigating the App

Using the Main Menu
Tap Sprocket to view information about your paired HP Sprocket Photo Printer.

Check the battery status and change the Auto Off settings for the printer.
View the Mac Address, Firmware Version, and Hardware Version. These will be necessary if contacting HP Sprocket Support.
This screen will also show Firmware upgrades when avilable.

Browse Photo Galleries

From the Main Menu, select a social source or the camera photo gallery to view supported photo sources.
Once an photo source is selected, swipe left or right on the screen to browse all the galleries.
For each social media source, a sign in screen will display until you enter your credentials and allow the sprocket app to access your photos

Take or Select a Photo

Launch the HP sprocket app.
On the Home Screen, tap the center camera icon to take a photo. You can also select a photo from your device or a social source by tapping one of the lower four icons.
If you choose to take a photo, your camera will open. Reverse the camera’s view by tapping in the upper left-hand corner. Tap to exit and return to the Home Screen.
Once you’ve taken or selected a photo, you can Edit, Print, or Share your selection.
See “Set up Social Media Sources” for information on accessing social media account photos.

Set up Social Media Sources

In the Main Menu, tap Sign In for each of the social media sources listed to allow the sprocket app to gather photos from your various accounts.
You will be redirected to the app login page.
Enter your credentials to allow sprocket access to your photo galleries.
Select a photo to edit, print, or share! You will be able to browse your social media photos within the sprocket app.

Image Preview

Edit, print, or share your photo from the image preview screen.
Exit Image Preview by tapping in the upper-right corner.
Tap the camera icon in the upper-left corner to take another photo.
Tap the edit icon to personalize your image. See “Edit a Photo”.
Tap the printer icon to print. See “Print a Photo”.
Use a two-finger pinching motion on the screen to zoom, rotate, and resize your photo.
Tap the share icon to send your image to social media and other apps. See “Share a Photo”

$HP -Sprocket -X7N07A -Portable Photo -Printer-fig $18$$

Edit a Photo
Tap the edit icon to adjust the photo’s appearance, add text or stickers, and apply filters. Be sure to save your creation when editing is complete by tapping the checkmark in the lower right corner. $HP -Sprocket -X7N07A -Portable Photo -Printer-fig $19$$

Print a Photo

Tap the print icon to send your photo to your HP Sprocket Photo Printer.
The confirmation message “Sending to printer” will display, along with a progress bar, to let you know your print job is processing.
The white power LED light will flash, the printer will make a light humming noise, and the image will begin printing while the job completes.
Now that you’ve printed your photo, use it to decorate as is or remove the backing from the photo sheet by gently peeling back on a corner. Stick it on a folder, binder, or in a scrapbook!
- If you receive an error message that you are not connected to your printer when you press print, be sure the printer is still powered on and re-pair your device with the printer to try printing again.
- If you send multiple print jobs in succession, you might receive a “Printer in Use” error message. To avoid this, allow each print job to complete before sending another image to the printer.
- Before printing, make sure no items are blocking the paper output slot.
- Do not turn off the printer while a job is processing.

Share a Photo

Tap the share icon to send your photo to social media and other apps.
After tapping Share, you can send your photo via SMS message, email, cloud storage, or to a social media source. When you select your desired sharing source, it will load in the appropriate application for that media outlet.

Safety Information

Battery Safety

Do not disassemble the product or battery or short the battery terminals.
Avoid contact with a leaking or damaged battery.
Adult supervision is recommended when the product is being used by young children.
Do not disassemble, strike, press, or put in a fire.
Do not use the printer if the product battery is swelling and causing product expansion.
Keep the device clear of high temperatures and moisture.

Disposal of waste equipment by users
This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your household waste disposal service, or go to http://www.hp.com/recycle.

Recycling Program
HP offers an increasing number of product return and recycling programs in many countries/regions and partners with some of the largest electronics recycling centers throughout the world. HP conserves resources by reselling some of its most populat products. For more information regarding recycling of HP products, please visit: www.hp.com/recycle

Removing Top Cover
Always power down your HP Sprocket Photo Printer before removing the top cover from the printer and when loading paper.

Specifications

Specification Description

Product numbers| X7N07A (white) X7N08A (black)
Dimensions and weight| • Dimensions: 116 x 75 x 23 mm (4.53 x 2.95 x 0.87 in)

• Weight: 0.172 kg (0.379 lb)

Connectivity| Bluetooth 3.0

Passive near field communication (NFC)

Printer management| HP sprocket app
Power supply| Internal rechargeable battery

Two-cell 500 mAh Li-Polymer 7.4 V

Charge time| Up to 90 minutes
Power consumption| 0.9 W (standby)

Average 15.91 W (based on first print)

Maximum 34.49 W at 25° C (77° F)

Print technology| Thermal printing with a ZINK® Zero Ink® printer

• Note: The HP Sprocket Photo Printer does not use ink cartridges to print.

Supported paper| HP ZINK® Sticky-Backed Photo Paper

5.0 x 7.6 cm (2 x 3 in)

Borderless printing| Yes
Supported file types| .jpeg, .tiff (iOS only), .gif, .bmp, and .png

• Note: If you send a non-supported file type, the print job does not print.

Charge and status light indicators

Environmental parameters| • Operating humidity: 5% to 70% RH (recommended)

• Non-operating humidity: 5% to 90% RH

• Operating temperature: 5° to 40° C (41° to 104° F)

• Recommended operating temperature: 15° to 32° C (59° to 90° F)

• Storage temperature: -30° to 70° C (-22° to 158° F)

Warranty| One-year limited hardware warranty

Visit hpsprocket.com for more information.

Regulatory Model Number| For regulatory identification purposes, your product is assigned a Regulatory Model Number. The Regulatory Model Number for your product is SNPRH-1603.

• Note: This regulatory number should not be confused with the marketing name (HP Sprocket Photo Printer) or product numbers (X7N07A and X7N08A).

Troubleshooting

What if the printer does not print?

If you are unable to print to the printer with the HP Sprocket app, use these recommendations to help troubleshoot printing issues.
Turn on the printer. By default, the printer is set to turn off after 5 minutes. To change when the printer automatically turns off, open the HP Sprocket app on your mobile device. Tap , tap sprocket, and then tap Auto Off. Select when you want the printer to turn off.
Charge the printer. On the printer, look for white and green indicator lights. The Status Indicator light is solid and white when the printer is turned on and the Charging
Indicator light is solid and green when the printer is fully charged.
Confirm Bluetooth is turned on and paired with your printer. On your mobile device, make sure Bluetooth is turned on and paired with your printer. If the printer is already paired to your mobile device, turning Bluetooth off and then on might resolve the issue.
Make sure the printer has photo paper in the input tray. Load up to 10 sheets of photo paper with the blue HP ZINK® Smartsheet. Make sure the Smartsheet® is on the bottom of the stack with the bar code facing down and the photo paper with the print side facing up.
Resolve any error messages that display on the HP Sprocket app. For example, if an “Out of Paper” message displays, load more photo paper into the input tray.
Move the printer and your mobile device closer together. Bluetooth signals can be weaker at greater distances.
Update the printer firmware. Make sure your mobile device is connected to the Internet and then open the HP Sprocket app. If there is a firmware update available, a firmware update screen displays. Follow the on-screen prompts to complete the update.
Reset the printer. On the printer, locate the pin-hole near the charging port, and insert a straight pin into the hole to press the reset button until the printer turns off.
Restart the printer.

What if the HP Sprocket app crashes?

When using the HP Sprocket app on your mobile device, the app stops working unexpectedly. Use these recommendations to troubleshoot the issue.
Turn on the printer. By default, the printer is set to turn off after 5 minutes. To change when the printer automatically turns off, open the HP Sprocket app on your mobile device. Tap , tap sprocket, and then tap Auto Off. Select when you want the printer to turn off.
Restart your mobile device. Turning off and then turning on your mobile device might clear any errors.
Check for an HP Sprocket app update. On your mobile device, go to the Google Play Store™ or the App Store®, and then search for the HP Sprocket app. Select the app from the list, and then check for an update.
Update the printer firmware. On your mobile device, make sure it is connected to the Internet, and then open the HP Sprocket app. If there is a firmware update available, a firmware update screen displays. Follow the on-screen prompts to complete the update.
Update the software on your mobile device. Check your mobile device settings to confirm you have the latest version of the operating system software installed. Contact your mobile phone manufacturer for more information about updating the operating system.

What can I do to improve print quality?

Use these recommendations to help improve print quality.
Use genuine HP ZINK® Sticky-Backed Photo Paper. ZINK® makes custom photo paper for a variety of printers, such as Polaroid, LG, and HP. HP recommends using HP ZINK® Sticky-Backed Photo Paper for best results. To purchase genuine HP ZINK® Sticky-Backed Photo Paper, go to the hpsprocket.com homepage. You can also purchase genuine HP ZINK® Sticky-Backed Photo Paper from other retailers.
Clean the output rollers with the blue HP ZINK® Smartsheet from the same pack of photo paper currently in the printer. Load the blue HP ZINK® Smartsheet into the input tray with the bar code facing down and the photo paper with the print side facing up, and then send a print job.
Allow the printer a few minutes to cool down between print jobs. When the printer becomes too warm, an error message might display on the HP Sprocket app. “Cooling down… Sprocket needs to cool down before printing another job. Wait to send another photo.” Tap OK to clear the message.
Store the photo paper in a cool, dry place and avoid contact with water. If water spills on a photo, wipe it away as soon as possible to prevent damaging the photo.
Use clean, wrinkle-free photo paper. Avoid loading wrinkled or curled photo paper into the printer.
Make sure images have a minimum resolution of 818 x 1258 pixels per inch (ppi) for optimal print quality. Screen capture images from your mobile device might not have sufficient resolution for optimal print quality. See your mobile device manufacturer for more information.

How do I load a new pack of HP ZINK® Sticky-Backed Photo Paper?
Load plain HP ZINK® Sticky-Backed Photo Paper into the input tray.

Turn off the sprocket.
Remove the top cover by sliding it away from the output slot, and then set it aside.
Load up to 10 sheets of photo paper with the blue HP ZINK® Smartsheet. Make sure the Smartsheet is on the bottom of the stack with the bar-code facing down, and the photo paper with the print side facing up.

Where can I purchase additional HP ZINK® Sticky-Backed Photo Paper?
To purchase genuine HP ZINK® Sticky-Backed Photo Paper, go to the hpsprocket.com homepage. You can also purchase genuine HP ZINK® Sticky-Backed Photo Paper from other retailers.

Why do I need to load the HP ZINK® Smartsheet?
The HP ZINK® Smartsheet calibrates the printer to provide the best print quality for printing with the specific pack of HP ZINK® Sticky-Backed Photo Paper. The HP ZINK® Smartsheet cleans the paper path rollers during calibration or when you need to improve print quality

How do I clear a paper jam?
If the printer stops feeding pages, it might be jammed. Clear paper jam and restart the printer by pressing and holding the power button. An error message will display on the HP Sprocket app. The Status Indicator light blinks and turns red.

On the HP Sprocket app, press OK to clear the error message.
Turn off the printer.
Remove the top cover by sliding it away from the output slot, and then set it aside.
Remove any loose photo paper from the input tray, and then set aside if necessary.
Gently remove the jammed paper from the input tray.
Reload the remaining photo paper with the print side facing up.
Align the top cover with the tracks on the outside of the printer, and then slide the top cover toward the output slot until it is firmly seated.
Turn on the printer.

How do I resolve an ‘Incorrect Paper Type’ error message?
When non-HP ZINK® Sticky-Backed Photo Paper is used during a print job, the printer stops feeding pages, ejects the non-HP ZINK® Smartsheet, and an “Incorrect Paper Type” error might display. Use only HP branded ZINK® paper. If using the correct paper, try printing again. If non-HP paper is loaded, the red light will blink after the Smartsheet is ejected. Resolve the issue by loading HP ZINK® Sticky-Backed Photo Paper and powering the unit off and then on again.
ZINK® makes custom photo paper for a variety of printers, such as Polaroid, LG, and HP. HP recommends using HP ZINK® photo paper for best results. To purchase genuine HP ZINK® Sticky-Backed Photo Paper, go to hpsprocket.com. You can also purchase genuine HP ZINK® Sticky-Backed Photo Paper from other retailers.

What if a ‘Paper Cover Open’ message displays?
If sending a print job and the printer does not respond, a “Paper Cover Open. Close the cover to proceed.” error message displays on the HP Sprocket app. The Status Indicator light blinks and turns red. On the HP Sprocket app, press OK to clear the error message. To replace the top cover, align the top cover with the tracks on the outside of the printer and then slide the top cover toward the output slot until it is firmly seated.

How do I maximize the battery life of my printer?
There are a number of ways to make sure your battery lasts as long as possible between charges. Use these recommendations to maximize battery life.

Change how long the printer remains on. On your mobile device, open the HP Sprocket app, tap , and then tap sprocket. Tap Auto Off, and then select 3 minutes.
Charge the printer via the USB cable when you are not using it. Leave the printer plugged into a power source when not in use.
NOTE: You can use the printer while it is charging.
Charge the printer for more than 90 minutes. HP recommends you charge the printer up to 90 minutes or until the power light turns green. However, you can charge the printer for longer than 90 minutes, which might increase battery life.
Use an external battery charger. Using an external battery charger allows you to charge the printer when the battery is low and you cannot access another power source. To purchase an external battery charger, go to hp.com. You can also purchase external battery chargers from other retailers.

What paper and file types are supported?
The printer supports the following paper and file types:

7.6 x 5 cm (3 x 2 in) HP ZINK® photo paper
BMP, GIF, JPEG, PNG, and TIFF (iOS only) file types

Can I send multiple print jobs at the same time?
No. The printer can only process one print job at a time. When you send a print job while the printer is processing another print job, a “Printer in Use. Sprocket is already processing a job. Please wait to resend photo.” message displays on your mobile device. Wait until the current print job completes and then send the next print job.

Can I print to more than one printer?
Yes. You can connect and print to more than one printer, but you cannot connect to multiple printers at the same time.

How do I reset my printer?
If the printer does not print when you send a print job or turn on when you press the power button, reset the printer with a straight pin to clear any errors.

Turn on the printer.
Locate the reset pin-hole near the charging port.
Gently insert a straight pin into the hole to press the reset button inside.
The printer resets and turns off.
Turn on the printer.

How do I attach a lanyard to my printer?
Attach a lanyard (sold separately) to your printer to secure the printer to your wrist, carabiner, etc.

Turn off the printer.
Remove the top cover by sliding it away from the output slot and then set it aside.
Remove any loose photo paper from the input tray and then set aside if necessary.
Locate the lanyard attachment point at the top of the printer.
With the lanyard in one hand, thread the smaller lanyard loop through the hole in the printer until approximately half of the lanyard is through the hole.
Thread one end through the opposite end of the lanyard.
Tighten the lanyard by pulling the opposite end.
Reload the remaining photo paper with the print side facing up.
Align the top cover with the tracks on the outside of the printer and then slide the top cover toward the output slot until it is firmly seated.
Turn on the printer.

What is the warranty of my printer?
The printer has a one-year limited hardware warranty from the date of purchase.

Where do I find the serial number of my printer?
You can find the printer serial number on the Universal Product Code (UPC) sticker inside the input tray. The serial number is a ten-digit alpha-numeric number that is unique to each printer.

Turn off the printer.
Remove the top cover by sliding it away from the output slot, and then set it aside.
Remove any loose photo paper from the input tray, and then set aside if necessary.
Locate the serial number on the UPC sticker inside the input tray.

What if I accidentally damage my printer?
HP cannot provide warranty services for a printer that is damaged due to customer misuse, such as dropping the printer or water damage.

FAQ’s

What is the HP X7N07A Sprocket Portable Photo Printer?

The HP X7N07A Sprocket is a portable photo printer that allows you to print photos directly from your smartphone or tablet.

How does the HP X7N07A Sprocket Portable Photo Printer work?

The Sprocket printer connects to your smartphone or tablet via Bluetooth and uses ZINK Zero Ink technology to print photos. It requires the use of the HP Sprocket companion app for printing.

What are the dimensions and weight of the HP X7N07A Sprocket Portable Photo Printer?

The dimensions of the HP X7N07A Sprocket are approximately 3.15 x 4.63 x 0.98 inches (80 x 117.5 x 25 mm). It weighs around 0.38 pounds (172 grams).

What is the print quality of the HP X7N07A Sprocket Portable Photo Printer?

The HP X7N07A Sprocket prints photos at a resolution of 313 x 400 dots per inch (dpi), producing smudge-proof, water-resistant, and vibrant 2×3-inch photos.

What kind of paper does the HP X7N07A Sprocket Portable Photo Printer use?

The HP X7N07A Sprocket uses ZINK (Zero Ink) photo paper. ZINK paper has embedded color crystals that are activated by heat to produce full-color prints without the need for ink cartridges.

What is the printing speed of the HP X7N07A Sprocket Portable Photo Printer?

The HP X7N07A Sprocket can print a photo in about 40 seconds, depending on the complexity of the image and other factors.

Does the HP X7N07A Sprocket Portable Photo Printer have a rechargeable battery?

Yes, the HP X7N07A Sprocket comes with a built-in rechargeable battery, allowing you to print photos on the go without requiring a power outlet.

What is the maximum number of photos the HP X7N07A Sprocket Portable Photo Printer can print on a single charge?

The exact number of prints per charge may vary, but the HP X7N07A Sprocket is capable of printing approximately 35 photos on a full battery charge.

Can I edit photos before printing them with the HP X7N07A Sprocket Portable Photo Printer?

Yes, you can edit photos using the HP Sprocket app before printing. The app offers various editing features like filters, frames, stickers, and text overlays.

Is the HP X7N07A Sprocket Portable Photo Printer compatible with both iOS and Android devices?

Yes, the HP X7N07A Sprocket is compatible with both iOS and Android devices. You can print photos from smartphones or tablets running on these operating systems.

What is the maximum paper capacity of the HP X7N07A Sprocket Portable Photo Printer?

The HP X7N07A Sprocket can hold up to 10 sheets of ZINK photo paper at a time.

Does the HP X7N07A Sprocket Portable Photo Printer support wireless printing?

Yes, the HP X7N07A Sprocket connects to your smartphone or tablet wirelessly via Bluetooth, allowing you to print photos without any physical connection.

Download The PDF Link:HP X7N07A Sprocket Portable Photo Printer User Manual