Simx Lighting LHT0424 Oyster LED with Microwave Sensor Instruction Manual
- June 14, 2024
- Simx Lighting
Table of Contents
Simx Lighting LHT0424 Oyster LED with Microwave Sensor
Product Specifications
- Product Name: Oyster LED with Microwave Sensor
- Model: LHT0424
- Sensor Type: Active motion sensor with 5.8GHz frequency
- Operating Voltage: 220-240V AC 50Hz
- Switching Capacity: 200W (LED), 800W (resistive)
- Microwave Frequency: 5.8GHz
Product Usage Instructions
Detection Area Settings
- Adjust the detection area settings to reduce the maximum detection diameter as needed.
Hold-Time Setting
- The hold-time setting determines how long the light will remain ON after the last activation.
- Choose from options like 5 seconds, 90 seconds, 5 minutes, or 15 minutes.
Daylight Threshold Setting
- Set the light level threshold below which the sensor will activate.
- The DAY setting ensures 24-hour detection regardless of ambient light.
Wiring Instructions
- This ‘Master’ fitting can be wired on the same circuit to activate up to 12 additional ‘non-sensor’ Simx Lighting Oyster LED fittings.
- Ensure proper wiring for seamless operation.
FAQ
- Q: Can this sensor switch different lamp types?
- A: No, this sensor is designed to work specifically with Simx Lighting Oyster LED fittings and does not support switching different lamp types.
INSTALLATION INSTRUCTIONS
- Oyster LED with Microwave Sensor
- Models: LHT0424
This light has an active motion sensor wired to the internal circuit. It emits
a high-frequency electromagnetic wave at 5.8GHz and receives its echo. Any
change to this echo will activate the light.
This ‘Master’ fitting can be wired on the same circuit to activate up to 12
more ‘non-sensor’ Simx Lighting Oyster LED fittings. This sensor will not
switch different lamp types.
APPLICATION
Detection Area
Detection area settings reduce the maximum detection diameter as a percentage.
Adjust as required.
Hold-time
Hold-time means the time the light will remain ON after the last activation.
Daylight Threshold
This sets the light level, below which the sensor will activate. The DAY
setting will provide 24-hour detection regardless of ambient light.
SENSOR TECHNICAL SPECIFICATIONS
- Operating voltage: 220~240V AC 50Hz
- Switching capacity (max): 200W (LED), 800W (resistive)
- Microwave frequency: 5.8Ghz
- Transmission power: <0.3mW
MOUNTING & DETECTION
Mounting Height (max) Detection Range (max)
- Ceiling Up to 6m Approx. 8m diameter @ 3m mounting
- Wall Up to 4m Approx. 8m radius @ 1.8m mounting
CONTACT
- Distributed by: Simx Limited | Ph: 09 259 1660 | Technical Support Ph: 09 259 1662
- Email: sales@simx.co.nz | Web: www.simx.co.nz
- Simx reserves the right to alter technical specifications without prior warning
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>