Caibo Qi2 3 In 1 Wireless Charger User Manual

Caibo Qi2 3 In 1 Wireless Charger

Product Information

• Input: 5V/3A, 9V/3A, QC3.0, PD
• Mobile output: 15W/10W/7.5W/5W
• Watch output: 5W/2.5 W
• Earphone output: 5 W
• Input interface: Type-C interface
• Charging frequency: 115-205 kHz
• Magnetic attraction: 0.8 KG
• Product size: 89.973.936.5mm

Product Usage Instructions

1. Connect the power supply to the product.
2. Place the phone, earphone, or watch in the corresponding charging position on the charger.
3. Allow the device to charge normally.

Frequently Asked Questions

What devices can be charged with this wireless charger?

This wireless charger is compatible with smartphones (including iPhone 12/13/14/15 series), Apple Watches (Ultra, Series, SE, Nermes), and Apple AirPods (1, 2, Pro).

How many devices can be charged simultaneously?

You can charge up to three devices at the same time using this wireless charger.

Can non-MagSafe phones be charged with this product?

Yes, for non-MagSafe phones, you can use an extra magnetic ring or MagSafe case to enable wireless charging with this product.

What should I be cautious about when using this wireless charger?

Do not over-squeeze or collide with the equipment. Avoid placing it too close to magnetic cards to prevent interference. Use a 9V adapter for sufficient power supply.

What is the warranty period for this product?

The product comes with a 12-month warranty from the date of purchase. Surface damage and missing accessories are not covered under warranty.

Package

• 3 in 1 Desktop Wireless charger *1
• Type-C charging cable *1
• User Manual *1

Functional component

Use Steps

1. Connect the power supply and power up the product.
2. Place the phone/earphone/watch in the corresponding charging position and charge it normally.

LED intelligent indicator Applicable Devices

1. Power on: the light stays on for 5 seconds and turns off
2. Standby: turn off the lights
3. Charging: the corresponding device’s indicator light will turn off after breathing for 10 seconds
4. Full charge: turn off the lights
5. Metal foreign object detection: the indicator of the phone and watch is flashing (there is no foreign object indicator light on for the earphones)

Charging Diagram

Charge 3 Apple devices at the same time

Rechargeable Apple phone

• iPhone 12/13/14/15
• non-MagSafe phones 12
• A magnetic ring can be added
• with mobile phone

Apple watch only

• Apple Watch Ultra
• Apple Watch Series/Full range
• Apple Watch SE
• Apple Watch Hermes

Apple earphone only

• AiPods1
• AiPods2
• AiPods3 Pro

Applicable Devices

1. 1. Smartphone: For non-MagSafe phones, please use an extra magnetic ring or MagSafe case to use this product. Support iPhone 12/13/14/15 series and other Qi phones
2. Smart Watch: Apple Watch
3. Earphone:
   Apple AirPods/Samsung earbuds and other Qi-compatible devices

Product Specification

• Input: 5V/3A,9V/3A, QC3.0, PD
• Mobile output: 15W/10W/7.5W/5W
• Watch output: 5W/2.5 W
• Earphone output: 5 W
• Input interface: type-C interface
• Charging frequency: 115-205 kHZ
• Magnetic attraction: 0.8 KG
• Product size: 89.973.936.5mm

Caution

1. Do not over-squeeze or collide with the equipment.
2. Please do not place it too close to the magnetic card (ID card, bank card, etc.) with a magnetic stripe or chip to avoid magnetic card failure.
3. Do not use a 5V adapter as insufficient power may cause charging interruption. Please use a 9V adapter for the power supply.

Warranty

The three guarantee periods of this product: from the purchasing date (Prevail to the customer receipt date or invoice date), provide 12 months guarantee. product surface man-made damage, accessories missed are not included in this guarantee, repair service for the product is out of the guarantee period or not covered by warranty, customer need to pay the repair charge.

Product Warranty Card

• For your rights and interests, please fill in carefully and keep it properly as a pre-maintenance voucher!
• Do not modify the content without authorization, otherwise it will be deemed invalid.
• The company reserves the final right to interpret the after-sales service regulations of the product.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Radiation Exposure Statement

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
• This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>