tp-link Deco W7200 AX3600 Whole Home Mesh WiFi 6 System Installation Guide
- June 6, 2024
- tp-link
Table of Contents
tp-link Deco W7200 AX3600 Whole Home Mesh WiFi 6 System Installation Guide
Getting Started
Download the TP-Link Deco app for iOS or Android. The app will walk you through the setup.
Need Help?
support, please go to
Navigate to Deco’s support page
- the Deco app
Swipe right at the main page and select ? Help from the menu.
LED Status
Each Deco has an LED light that changes color according to its status. See the explanation below.
LED|
DECO STATUS
---|---
Pulse Yellow| Deco is resetting
Solid Yellow| Deco is starting up
Pulse Blue| Deco is ready for setup, or WPS is in progress.
Solid Blue| Deco is setting up.
Pulse Green| Deco is upgrading firmware.
Solid Green| Deco is all set up and connected to 4G / WAN.
Solid White| Deco is all set up and connected to 5G
Pulse Red| The satellite Deco is disconnected from main Deco.
Solid Red| Deco has an issue.
Safety Information
- Adapter shall be installed near the equipment and shall be easily accessible.
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use damaged charger or USB cable to charge the device.
- Do not use any other chargers than those recommended.
- Do not use the device where wireless devices are not allowed.
- Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Declarton confromity
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at
https://www.tplink.com/en/support/ce/.
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the Radio Equipment Regulations
2017.
The original UK Declaration of Conformity may be found at
https://www.tplink.com/support/ukca/.
Warranty Information
For TP-Link Branded Products Only. For more information about warranty, please visit https://www.tp-link.com/en/support
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).
TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH
ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.
TP-Link warrants the TP-Link branded hardware product contained in the original packaging against defects in materials and workmanship when used normally in according with TP-Link’ s guidelines for some period which depends on the local service from the date of original retail purchase by the end-user purchaser.
Operating Frequency/max
output power| 2400~2483.5MHz/20dBm 5150~5250 MHz(Indoor use only)/23dBm
5250~5350 MHz(Indoor use only)/23dBm
5470~5725 MHz/30dBm| WCDMA Band 1,3,8 / Power Class 3
LTE Band 1,3,7,8,20, 28, 34, 43 / Power Class 3
LTE Band 38,40,42 / Power Class 2 & Power Class 3
5G 1,3,7,8,20,28,38, 40 / Power Class 3
5G N41,77,78 / Power Class 2 & Power Class 3
---|---|---
Attention: In Great Britain, the operation in the frequency range 5150MHz –
5350MHz is only permitted indoors.
GNU General Public License Notice
This product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”). As applicable, TP-Link (“TP-Link” in this context referring to the TP-Link entity offering respective software for download or being responsible for distribution of products that contain respective code) provides, by itself or with the support of third parties (e.g. the TP-Link Corporation Limited), mail service of a machine readable copy of the corresponding GPL source code on CD- ROM upon request via email or traditional paper mail. TP-Link will charge for a nominal cost to cover shipping and media charges as allowed under the GPL. This offer will be valid for at least 3 years.
For GPL inquiries and the GPL CD-ROM information, please contact GPL@tplink.com or write to Suite 901, New East Ocean Centre, Tsim Sha Tsui, Hong Kong. Additionally, TP-Link provides for a GPL- Code-Centre under https://www.tp-link.com/en/support/gpl/ where machine readable copies of the GPL source codes used in TP-Link products are available for free download. Please note, that the GPL-Code-Centre is only provided for as a courtesy to TP-Link’s customers but may neither offer a full set of source codes used in all products nor always provide for the latest or actual version of such source codes.
The GPL Code used in this product is distributed WITHOUT ANY WARRANTY and is
subject to the copyrights of one or more authors. For further information
about GNU General Public License please refer to the following website:
https://static.tp-link.com/resources/document/GPL%20License%20Terms.pdf
