Shenzhen Caibo 2AXTH-H5 H5 Gear Mounted Car Holder User Manual
- June 12, 2024
- Shenzhen Caibo
Table of Contents
Shenzhen Caibo 2AXTH-H5 H5 Gear Mounted Car Holder
Product Information
- Product Name: H5 Gear Mounted Car Holder
- Input Voltage: 5V/2A, 9V/2A, 12V/2A QC3.0, PD
- Output Power: 5W, 7.5W, 10W, 15W (Max)
- Working Temperature: -10°C to +45°C
- Charging Distance: 6mm (recommended working distance: 3mm)
- Applicable Phones: Wireless charging phones that support QI protocol
Product Usage Instructions
- Assemble and tighten the product and the accessories through the ball head nut (compatible with other ball head diameter 17mm accessories), and fix it in the ideal position.
- Connect the product with a QC3.0 car charger (optional) using the data cable and plug it into the cigarette lighter to provide power.
- The best distance for wireless charging is within 4mm. Avoid using metal or mobile phone cases thicker than 4mm to ensure fast wireless charging.
- To remove the phone from the product, manually press the button on the back to automatically open the clamping arm. Insert the phone and manually close the clamping arm to enter the charging state. If removing the phone in a power-off state, press the button within 5 minutes.
- Do not use the product in the car at a temperature above 60 degrees.
Note: The product warranty is valid for 12 months from the date of purchase. Surface damage caused by the user and missing accessories are not covered under warranty. Repair services are available for products outside the warranty period or not covered by warranty, but repair charges will apply.
Product introduction
- Left arm clamp
- Right arm clamp
- Bottom bracket arm clamp
- Wireless charging coil
- Open arm clamp button
- indicator light
- Type-C charging port
- Air outlet clip
Product parameters
- Product Name: H5 Gear Mounted Car Holder
- Input voltage: 5V/2A, 9V/2A, 12V/2A QC3.0, PD
- Output power: 5W, 7.5W, 10W, 15W (Max)
- Working temperature: -10 ℃~+45 ℃
- Charging distance: ≤ 6mm (recommended working distance: 3mm)
- Applicable phones: wireless charging phones that support QI protocol
Direction for use
- Assemble and tighten the product and the accessories through the ball head nut (compatible with other ball head diameter 17mm accessories), and fix in the ideal position. Connect the product with a QC3.0 car charger (optional) with the data cable, and plug in the cigarette lighter to take power.
- After the product is powered on, the indicator light will turn on and wait for the phone to be placed. After placed the phone, After putting on the phone Coil automatic induction alignment. The product will start wireless charging, the indicator light is on for breathing effect; If the phone doesn’t support wireless charging or if it detects a metal foreign object, the light flashes alternately for 5 seconds and then goes off. The maximum charging power of this productis 15W, and the charging efficiency will vary according to the charging environment and mobile phone.
- The best distance of wireless charging is within 4mm, and it cannot penetrate metal, so it is necessary to avoid using metal or too thick (over 4mm) mobile phone case, so as to ensure fast wireless charging of mobile phone.
- After the phone is removed from the product, the indicator will immediately show the standby status . When the car engined off and the power supply stops, the indicator light goes off.
- How to remove the phone:
Manually press the button on the back, the clamping arm will automatically open, insert the phone and manually close the clamping arm, and the phone will enter the charging state. (If removing the phone in a power off state, press the button within 5 minutes)
installation
- Thread the nut through the ball joint
- Push the ball joint into the ball joint bracket and tighten the nut clockwise
- Place the bracket on the air outlet blade and tighten the clip clockwise
Air vent mount
Adjust the position of the top piece of the air outlet and the rotatable clip assembly according to the position of the air outlet blade; insert the blade and select the lock switch position according to the thickness of the blade; suitable for one-key locking of the air outlet of most cars. Silicone touches the car, tighter and fits better to protect the car from scratches.
Precautions
- Do not use the product in the car at a temperature above 60 degrees.
- Do not use this product in professional racing or extreme off-road driving.
The guarantee
Products three guarantees valid time:From purchasing date (Prevail to the customer receipt date or invoice date),provide 12 months guarantee.Prod-uct surface man-made damage,acces sories missed are not include in this guarantee.repair service for you for the product is out of the guarantee period or not covered by warranty ,but you need to pay the repair charge.
Product Warranty Card
For your rights and interests , please fill in carefully and keep it safely as a pre-repair certificate! Do not modify the content without authorization,otherwise it will be considered invalid The company reserves the right of final interpretation of the product atter-sales service regulations.
Package
- Wireless charger *1
- Type-C cable *1
- Air vent mount *1
- User manual *1
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of device a distance of 15 cm
surrounding the device and 20 cm above the top surface of the device must be
respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>