Shenzhen Caibo Technology X5 Wireless Charger Car Holder User Manual
- June 5, 2024
- Shenzhen Caibo Technology
Table of Contents
Shenzhen Caibo Technology X5 Wireless Charger Car Holder
Package
- Wireless charger *1
- Type-C cable *1
- Air vent mount *1
- User manual *1
- Adjustable suction cup mount (Optional)
- Rotatable 3M mount (Optional)
- Car charger adaptor (Optional)
Functional component
Specifications
- Name: X5 wireless induction car holder
- Material: PC + ABS
- Input: 5V2A 9V 2A
- Output power: 15W (supports 10W, 7.5W, 5W)
- Input interface: Type-C
- Charging distance: < 8mm
- Support specifications: Ql wireless protocol
- Support QC wireless fast charging equipment need to match QC charger)
- Car charger requirements: QC3.0 car charger
- Applicable size: 4.7-6.9 inch mobile phone
Direction for use
- After power on, the ambient charger indicator shows blue. The 2 clamp arms open automatically in 5 seconds.
- After putting on a phone, the device will detect charging or foreign bodies automatically. If any foreign bodies are detected, the 2 arms will clamp the phone automatically.
- Before putting on the phone, you can adjust the length of the bottom holder to strengthen the wireless charging efficiency. Normal phone charging will display a green light breathing.
- When the product is power on, you can press any one of the 2 buttons on both sides to open the clamp arms, and put on the phone; When the phone is taken off, the indicator shows blue, it means the charger is in standby mode.
- When it’s power off, and the phone is still clamped. 5 buzzings ring in 2 seconds to remind you to take off the phone.(The built-in super capacitor ensures the clamp arms can open and close 3-5 times in 5 minutes when you press any one of the 2 buttons)
- Please use a QC 3.0 car charger adaptor for fast charging.
Air vent mount
Adjust the air vent holding piece position and the rotatable Components
position according to the air vent blade position. Press and hold the switch
to open the clamp and insert the blade. The product is suitable for most air
vents, including horizontal, vertical, and round air vents.
Suction cup holder
Put the suction cup holder on a flat place, adjust the angle, and press the
button, the suction cup will attach to the flat surface tightly. TPU suction
cup epoxy dual adsorption, one key locking. dual connection rods design, good
for storage and package(ultra thin and ultrashort).
Rotatable 3M holder
Clean the place where you want to attach the holder, tear off the protection
paper at the bottom of the 3M glue holder, attach it to a suitable place,
press it. Use the holder after 72 hours will be better, When the holder is
fixed, the angle can be adjusted 360°. TPU+ABS, more fastness attaching to car
cambered surface. 3M glue was imported from Japan and adhered more fastness.
Intelligent protection
Over-temperature protection
The coil stops charging when the temperature exceeds 60°C, the red light
flashes, and starts charging when the temperature is below 55°C.
Over-current protection
When the phone exceeds to maximum of 15W, the transmitting terminal limits the
power to keep increasing. Over-current protection doesn’t work. Overvoltage
protection, The phone may be damaged if the voltage is over 9.5V, which is the
maximum output voltage of the Transmitting terminal.
Foreign object detection
When the wireless charger detects a metal foreign object, it will stop
charging.
Precautions
- Do not over-squeeze or bump the deice.
- Do not use the wireless charger in severely hot, humid, or Corrosive environments to avoid damage. Circuit of the device.
Dear customer
Thank you for purchasing this product. To ensure you can get a reliable after-
sale service. please kindly read the below instructions carefully: The
products belong to the designated distributor, every column is required and
true of registered for this card, otherwise, it will be regarded as an invalid
one, This card is the primary document for the three guarantees for products,
please keep properly, no new one for the lost, when you need some technical
service, please show this card, we will provide you with quality professional
services.
The guarantee doesn’t include the below situation:
- Can not provide valid proof or the invoice, except some doc. that can prove it’s still in the valid time. Change this card information for personal.
- The product batch number isn’t the same as the true batch number or distributor’s seal. using, maintaining, and storing
- Any damages because of according to the instructions.
- Due t accidental disasters, self demolition, man-made damage, or failure by the company’s authorized service repair.
- No name and address. production date or no product certificate.
- Damage caused by force majeure. Products three guarantees valid time: From purchasing date (Prevail to the customer receipt date or invoice date),provide12 months guarantee. Product surface man-made damage, access- Stories missed are not included in this guarantee. we can also provide the service for you for the product is out of the surface or doesn’ tinclude in this guarantee, but you need to pay the repair charge.
Product Warranty Card
For your rights and interests, please fill it in carefully and keep it safely as a pre-repair certificate! Do not modify the content without authorization, otherwise, it will be considered invalid. The company reserves the right of final interpretation of the product after-sales service regulations.
FCC Warning
complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. This equipment has been tested and found to comply with the Limits or a Class B digital device, pursuant to part lb of the FCC Kules.These 1imits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmtul interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separat1on between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that t0 to which the receiver is connected.
- Consult the dealer or an experienced radio/TV techni1clan for help.
FCC RF exposure statement
The equipment complies with FCC radiation exposure limits set forth for an
uncontrol-led environment. During the operation of device, a distance of l5cm
surrounding the device and 20 cm above the top surface of the device must be
respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>