Shenzhen Caibo Technology T5 3-In-1 Fast Wireless Charger User Manual
- June 5, 2024
- Shenzhen Caibo Technology
Table of Contents
Shenzhen Caibo Technology T5 3-In-1 Fast Wireless Charger User Manual
Package
- Foldable 3 in 1 Desktop Wireless charger *1
- Type-C charging cable *1
- User Maunal *1
Functional component
Use steps
- Plug in the type-C cable to supply power for wireless charger.
- Place the smart phone in the corresponding area, that can be charged normally.
- Place the Apple watch on the watch area, that can be charged normally.
- Place the earphone in the corresponding area, that can be charged normally.
LED intelligent indicator
Green light on:
Standby status
Green light flashing:
Foreign object detected
Green light breathing:
Wireless charging mobile phone
Charging Instruction
Charge 3 Apple devices at the same time Use steps
Mobile phone can be charged with non-metallic shell
Applicable Devices
Smartphone：
Apple：iPhone13 Pro,iPhone12/12Pro/12Pro Max/12 mini/
SE/11/11Pro/Max/Xs/Xs Max/XR/8/8
Plus Samsung: Galaxy S 215G/21+5G/21Ultra 5G/FE5G/ 205G/20+5G/20U tra5G/10/10+/10e/9/9+/8/8+ 7/7 edge/6/6edge/6 edge+/6 G9209/6 Active /Galaxy Note:10/10e/10+/9/8/7/6/5
Huawei:P30 Pro/P40 Pro/P40 Pro+/Mate:40E/40RS/40 Pro+40 Pro/40/30E Pro/305G/30 Pro5G/30/30 Pro/30 RS/20 Pro/20 RS/RS
Xiaomi:12/12 Pro/11/11 Pro/10/10Pro/9/9 Pro/Mix3/Mix2s
Including other devices with built-in wireless charging receiver (Note: all
the above devices must comply with Qi standard)
Smart Watch:
Apple:iWatchS2/S3/S4/S5/S6/SE
Earphone:
Apple:AirPods1/2/Air Pods Pro
Product specification
Input: 5V/3A、9V/2A、12V/1.5A
Mobile output: 15w/10w/75w/5w
Watch output: 2.5W
Earphone output: 2.0W
Input interface: type-C interface
Conversion rate (mobile phone charging): ≥ 75%–78%
Product size: 142x115x125mm
Caution
- Do not over squeeze or collide with the equipment.
- Do not use the wireless charger under severe high temperature, humidity or corrosive environment, to avoid damaging the circuit of the equipment.
- Do not use the wireless charger under severe high temperature, humidity or corrosive environment, to avoid electric leakage in damaged circuit.
- Do not place with magnetic card (ID card, bank card, etc.) with magnetic stripe or chip Too close to avoid magnetic card failure
Warranty
The three guarantee period of this product: from the date of purchase (sent by the returned customer receipt or purchase machine Subject to the ticket date), provide 12-month warranty service, and other accessories (such as packaging, etc.)It is not within the scope of three guarantees. The appearance of the product is artificially damaged, and the loss of accessories is not within the scope of three guarantees scope. For products that are not within the three guarantees or exceed the three guarantees period, customers still enjoy maintenance services, but the maintenance cost shall be paid.
Product Warranty Card
For your rights and interests, please fill in carefully and keep it properly
as a pre maintenance voucher!
Do not modify the content without authorization, otherwise it will be deemed
invalid.
The company reserves the final right to interpret the after-sales service
regulations of the product.
FCC Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.