Caibo QI2 Wireless Car Charger User Manual
- June 16, 2024
- Caibo
Table of Contents
Caibo QI2 Wireless Car Charger User Manual
Functional component
- Wireless Charging Area
- Heat Dispatch Hole
- Charging indicator light
- Screw Cap
- Type-C interface
- Rotary locking tail clamp
- Light Switch
- Air outlet clip
Working Process
Lighting mode
Mode | Indicator light |
---|---|
Power on | Green light always on |
Standby | Green light always on |
Charging | Green light breathing |
Full Charged | Green light always on |
Foreign object detected
| Green light flashes quickly for 5seconds and goes out, and be restored after foreign object removed
Direction for use
-
Assemble and tighten the product and the accessories through the ball head nut (compatible with other ball head diameter 17mm accessories), and fix in the ideal position. Connect the product with a QC3.0 car charger (optional) with the data cable, and plug in the cigarette lighter to take power.
-
After the product is powered on, the indicator light will turn on and wait for the phone to be placed. After placed the phone,
the magnetic suction force automatically absorbs the phone, and the coil is aligned. The product will start wireless charging, the indicator light is on for breathing effect; If the phone doesn’t support wireless charging or if it detects a metal foreign object, the light flashes alternately for 5 seconds and then goes off. The maximum charging power of this product is 15W, and the charging efficiency will vary according to the charging environment and mobile phone. -
The best distance of wireless charging is within 4mm, and it cannot penetrate metal, so it is necessary to avoid using metal or too thick (over 4mm) mobile phone case, so as to ensure fast wireless charging of mobilephone.
-
After the phone is removed from the product, the indicator will immediately show the standby status . When the car engined off and the power supply stops, the indicator light goes off. The mobile phone is still attached to the product by magnetic force and can be taken off at any time.
Air vent mount
Adjust the position of the top piece of the air outlet and the rotatable clip assembly according to the position of the air outlet blade; insert the blade and select the lock switch position according to the thickness of the blade; suitable for one-key locking of the air outlet of most cars. Silicone touches the car, tighter and fits better to protect the car from scratches.
Product specification
Model:MG10-Q
Input:5V/3A, 9V/3A,12V/2.5A QC3.0 ,PD
Output power:5W, 7.5W, 10W, 15W (MPP) Working temperature: -10℃ ~ +45℃
Charging frequency:115K~205KHz Induction distance:≤4mm
Magnetic attraction:1.7KG
Compatible phones: iPhone 12/13/14/15 bare phone or with magsafe cases or the
other phones with magsafe cases or magnetic rings.
Caution
- For smartphones that are not magnetic, please add a magnetic ring before using this product.
- Do not over squeeze or collide with the
- Please do not place it too close to the magnetic card (ID card, bank card, etc.) with magnetic stripe or chip to avoid magnetic card
Package
Wireless charger1 Air vent mount1 Type-C cable1 User manual1
Warranty
The three guarantee period of this product: from purchasing date (Prevail to
the customer receipt date or invoice date),
provide 12 months guarantee. product surface man-made damage,accessories
missed are not include in this guarantee, repair service for the product is
out of the guarantee period or not covered by warranty ,customer need to pay
the repair charge.
Product Warranty Card
For your rights and interests, please fill in carefully and keep it properly
as a pre maintenance voucher!
Do not modify the content without authorization, otherwise it will be deemed
invalid.
The company reserves the final right to interpret the after-sales service
regulations of the product.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>