OTOFIX D1 All System Diagnostic Tool User Guide

June 3, 2024
OTOFIX

OTOFIX D1 All System Diagnostic Tool

OTOFIX D1-All-System-Diagnostic-Tool-PRODUCT-IMG

Thank you for purchasing OTOFX diagnostic tool. This tool is manufactured to a high standard and will provide years of trouble-free performance when used in accordance to these instructions and properly maintained.

Functional Description

OTOFIX D1 All-System-Diagnostic-Tool-FIG-
\(1\)

  1. 7-inch Touchscreen
  2. Built-in Microphone
  3. Power LED
  4. Ambient Light Sensor
  5. Speaker
  6. Camera
  7. Camera Flash
  8. USB OTG/Charging Port
  9. USB Port
  10. Micro SD Card Slot
  11.  Power/Lock Button

OTOFIX V1OTOFIX D1 All-System-Diagnostic-Tool-FIG-
\(3\)

  1. Flashlight Power Button
  2. Power LED
  3. Vehicle/Connection LED
  4. Vehicle Data Connector (16-pin)
  5. USB Port

OTOFIX V1 Description

LED Color Description


Power LED

| Yellow| VCI is powered on and performing self-check.
Green| VCI is ready for use.
Flashing Red| Firmware is updating.


Vehicle/ Connection LED

| ****

Green

| •  Solid Green : VCI is connected via USB cable.

•  Flashing Green : VCI is communicating via USB cable.


Blue

| •  Solid Blue : VCI is connected via Bluetooth.

•  Flashing Blue: VCI is communicating via Bluetooth.

Getting Started

IMPORTANT: Before operating or maintaining this unit, please read the Quick Reference Guide and User Manual carefully, paying extra attention to the safety warnings and precautions. Failure to use this unit correctly may cause damage and/or personal injury and will void the product warranty.

  • Insert the V1 into the OBDII port, which is generally located under the vehicle dashboard.

  • Long press the Lock/Power button to power up the Diagnostic Tablet. Ensure the Diagnostic Tablet has a charged battery or is connected to the DC power supply.

  • Pair up the Diagnostic Tablet with the V1 via Bluetooth to establish a communication link.
    NOTE: The Diagnostic Tablet and the V1 are configured to automatically synchronize with each other on first use, so there is no need to pair up.OTOFIX D1 All-System-Diagnostic-Tool-FIG- \(6\)

  • When the V1 is properly connected to the vehicle and the Diagnostic Tablet, the VCI status button at the bottom bar on the screen displays a green BT icon. This indi- cates your Diagnostic Tablet is ready to start vehicle diagnosis.OTOFIX D1 All-System-Diagnostic-Tool-FIG- \(7\)

www.obdii365.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals