Shenzhen Caibo Technology SAHARA Fast Wireless Charger User Manual
- June 6, 2024
- Shenzhen Caibo Technology
Table of Contents
Shenzhen Caibo Technology SAHARA Fast Wireless Charger
Functional component
Specifications
Direction for use
- Assemble the product and any accessory through a ball head nut and tighten it (compatible with other ball head diameter 17mm accessories), and fix it in an ideal position. Connect the product to the QC3.0 car charger (optional) with the data cable, and insert to the cigarette lighter to get electricity.
- After the product is powered on, the indicator on the right side will turn on blue, and the left and right telescopic arms will automatically open after 5 seconds to wait for the mobile phone to be placed; if the product does not turn on red after power on (not turn on, flash or turn on other color lights) All indicate that there is a problem with the product, please stop using it and return it to the seller for processing).
- In order to ensure the efficiency and stability of charging, before putting the phone on, adjust the bottom bracket position of the stand and try to align the center position of the back of the phone with the ” ” symbol on the stand panel as much as possible. Cell phones of different sizes should correspond to different Stalls. The best distance for wireless charging is within 3~5mm and cannot penetrate metal, so it is necessary to avoid using metal or too thick (greater than 3mm) mobile phone protective shells to ensure fast wireless charging of mobile phones.
- After placing the phone, the left and right clamping arms will automatically clamp the phone. If the phone supports QI wireless charging protocol, the product will start wireless charging at the same time, and the indicator light turns blue when the product wireless charging starts; if the phone does not support wireless charging, the light goes out. The maximum charging power of this product is 15W, and the charging efficiency will vary according to the charging environment and mobile phone.
- When the product is powered on, you can open the clamp arms by pressing any button on both sides of the product to remove the phone; after removing the phone, the indicator will immediately show a red light standby state. (The buttons on both sides of the product can be clamped or opened with any one key.)
- When the product is turned off and the product stops supplying power, if the mobile phone is still on the holder, the holder will issue an alarm 5 times within 2 seconds to remind the user to remove the mobile phone. (The built-in super capacitor is powered off for 5 minutes.You can press the side button to open the arm to take away the phone. )
Suction cup holder
Place the suction cup on a suitable flat position, adjust the angle and press the button to lock the suction cup firmly onto the flat surface. After fixing, the angle and the front-to-back distance can be adjusted at will. TPU suction cup + glue double adsorption, one key to lock.
Air vent mount
Adjust the position of the top piece of the air outlet and the rotatable clip assembly according to the position of the air outlet blade; insert the blade and select the lock switch position according to the thickness of the blade; suitable for one-key locking of the air outlet of most cars. Silicone touches the car, tighter and fits better to protect the car from scratches.
Rotatable 3M holder
Wipe clean the place to be pasted, tear off the protective tape at the bottom of the 3M glue, and paste it in a suitable place. Please press it and let it stand for 48 hours before fully tightening it before use. After the holder is fixed, it can be 360° Rotated to adjust the angle. The car arc can also be glued and fastened.
CC Warning statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Precautions
- Do not use the product in the car at a temperature above 60 degrees.
- Do not use this product in professional racing or extreme off-road driving.
- When the phone is fully charged, it may not automatically clamp on the product.
The guarantee
Products three guarantees valid time:From purchasing date (Prevail to the customer receipt date or invoice date),provide 12 months guarantee.Prod-uct surface man-made damage,acces sories missed are not include in this guarantee.We can also provide the service for you for the product is out of surface or doesn’t include in this charge.guarantee,but you need to pay the repair charge.
PEODUCT WARRANTY CARD
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>