kogan com KAPB6P2SWTA 6 Outlet Surge Protect Powerboard User Guide

User Guide

6 OUTLET SURGE
PROTECT POWERBOARD
(WITH 3 X USB-A & 1 X 30W PD USB-C PORT)
KAPB6P2SWTA

SAFETY & WARNINGS

The RCM is a visible indication of a product’s compliance with all applicable ACMA regulatory arrangements, including all technical and record-keeping requirements.

• For the safety of yourself and others, follow all instructions and take notice of all the warnings. When adhered to, these safety precautions can reduce the risk of fire, electric shock and injury.
• Read all instructions carefully and retain this user guide for future reference.
• This product complies with Australian Safety Standards AS/NZS 3105, AS/NZS 62368.1.
• If the power board or cord is damaged, contact help.Kogan.com for support. Do not attempt to open the board or replace the cord. The cord must be replaced by appropriately qualified personnel.
• If the power board requires repair, contact help.Kogan.com for support. Never disassemble or modify the power board or attempt to service it yourself.
• Run the power cord in such a way that there will be no risk of anyone pulling it inadvertently or tripping over it.
• The power board is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction by a person responsible for their safety.
• Young children should be supervised to ensure they do not play with the power board. Close supervision is always necessary when any appliance is used by or near children.
• This power board is designed for indoor use in dry places only.
• Do not exceed a maximum loading of 2400 watts.
• Always ensure that electrical connections are properly grounded.
• Only use the power board with the power cord fully unwound.
• Place the power board away from:
  • Heat sources, radiators or other products that produce heat.
  • Areas with high temperatures, high humidity, or direct sunlight.
  • Excess dirt and dust.
  • Open windows and any place where water may get into the unit.
• Do not immerse the cord, plug or the power board in water or other liquid, or expose the electrical connections to water or other liquid.
• Unpack the power board and keep the original packaging in a safe place. Reuse the original packaging when storing or transporting the power board to prevent damage.
• When not in use, disconnect from the power source and store in a cool, dry, and wellventilated location out of direct sunlight and not subject to humidity.
• Warning: Discard this power board if the power cord is damaged.
• Warning: The electrical outlet must be located near the power board and should be easily accessible.

COMPONENTS

Note:
Only one power board is supplied (white or black).

OVERVIEW

1| Overload Circuit Breaker (Resettable)| Protects against current overload at 10 amps.
---|---|---
2| Surge Protection LED Indicator| When illuminated green, all connected devices are surge protected.
3| Power Switches| Each switch controls 3 outlets.
4| Surge Protected Electrical Outlets| The 3 outlets controlled by the same Power switch can be used interchangeably.
5| USB-C Port| Charge devices that support USB-C PD (Power Delivery) connection.
6| USB Ports| For charging phones, tablets, or other mobile devices.
7| USB/USB-C Port Indicator| The USB/USB-C port is in use.

CLEANING & CARE

• Only use a soft, dry cloth for cleaning the product; do not use a damp cloth.
• Never clean with industrial strength polish, wax, benzene, paint thinner, air freshener, lubricant, detergent or other chemicals.
• Wipe off any moisture, dirt or dust on the power outlets and plug pins with a clean, dry cloth.

SPECIFICATIONS

TROUBLESHOOTING

No power output from one of the outlets.| • Ensure the correct power switch is turned on; each switch controls 3 outlets.
• Verify if the other outlets controlled by the same switch are functional. If they are, the issue may be due to a loose or disconnected contact in the faulty outlet. Avoid using this outlet until it is repaired.
---|---
No power output from any of the outlets.| • Ensure both power switches are turned on. Toggle the switches on and off several times to confirm they are functioning.
• Check if the surge protection LED indicator is green, signalling proper function.
• Examine the overload circuit breaker; if it has tripped, press it down to reset.
No output from the USB/USB-C ports.| • Confirm that the USB/USB-C cable is securely connected to the port. If unsure, try using a different port.
• Note that the total output current for all USB ports is 3.1A, with each port supporting up to 2.4A. If necessary, disconnect other devices to ensure adequate power availability.
• Verify that your device is compatible with PD (Power Delivery) 30W for the USB-C port.
• Try using a different USB/USB-C cable if problems persist.
Power board is not turning on.| • Inspect the plug and cord for any visible damage.
• Ensure that the connected devices do not exceed the maximum load capacity of 2400W or 10A. If this limit is exceeded, remove some devices and press the overload reset button.

Disposal

This marking indicates that this appliance should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>