kogan com Z9 Pro Portable Cordless Vacuum User Guide
- June 1, 2024
- Kogan com
Table of Contents
kogan com Z9 Pro Portable Cordless Vacuum
Product Information
Specifications
- Voltage: 7.4V
- Charging Adapter Input Voltage: 100-240V~50/60Hz
- Charging Adapter Output Voltage: Type-C 5V
- Charging Time: 3.5h~4.5h
- Running Time: 10~18min
Product Usage Instructions
Assembly
- 2-in-1 Brush: Align the 2-in-1 brush with the end of the vacuum body and push it gently. The 2-in-1 brush can be stored in the vacuum body when not in use.
- Extension Tube: Align the extension tube with the vacuum cleaner body and push it gently.
- Connecting the Brush: Align the brush with the end of the extension tube and push it gently.
Operation
Turning the Vacuum On/Off:
- Starting the Vacuum: Press the power button to power on the vacuum cleaner.
- Adjusting Suction Power: Press the power button again to switch to turbo mode for stronger suction power.
- Turning Off the Vacuum: Press the power button once more to turn off the vacuum.
Charging the Vacuum Cleaner:
Plug the power adapter into the vacuum’s charging input to begin charging.
Use only the provided power adapter.
Cleaning & Care
Dust Cup Assembly and Disassembly: Rotate the dust cup assembly to empty it from the vacuum body after each use for proper maintenance.
Troubleshooting
- Fault: Appliance doesn’t start
- Cause: Flat battery
- Solution: Charge the vacuum cleaner.
- Fault: Reduced suction
- Cause: Insufficient application time after charging
- Solution: Fully charge the battery.
FAQ
If you need more information or support, please visit
help.kogan.com.
Z9 PRO PORTABLE CORDLESS VACUUM
KAVACPOR9LT
SAFETY & WARNINGS
- Do not suck up detergent, kerosene, broken glass, needle, cigarettes, wet dust, sewage, match, etc.
- Do not pick up small particles or large objects like cement, land plaster, calcimine. It may cause the model to be blocked; motor burned, etc.
- Do not operate the vacuum cleaner too close to heaters, radiators, and other hot surfaces.
- Never use the appliance without filters or the brush in place.
- Never operate with a blocked air inlet or blocked floor brush roller when using, or it may cause the motor to burn.
- Do not immerse the body of the vacuum cleaner into water as this could increase the risk of short circuit and burning the model.
- Always disconnect the charger when fully charged or during cleaning or maintaining. Do not stretch or pull the cable.
- Use a dry cloth to clean the appliance. Do not use alcohol or solvents as the surface of the appliance may be damaged.
- Do not use and store the appliance in a hot or cold environment. Only operate in a dry indoor area where the temperature is more than 0°C but less than 40°C. Avoid direct prolonged exposure to sun light.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the vacuum cleaner in a safe way and understand the hazards involved.
- Children should not play with the vacuum cleaner.
- Cleaning and user maintenance should not be performed by children without supervision.
- If the appliance is not operational after being fully charged. Cease use and contact help.Kogan.com for support.
- Do not disassemble the appliance as incorrect reassembly may result in an electric shock or fire.
- Depleted batteries should be safely recycled. Do not throw away with household rubbish.
- Do not use with damaged cable or plug. If the power cord is damaged, it must be replaced by Kogan.com, a service agent or similarly qualified person to avoid a hazard.
- Never submerge the body of the vacuum cleaner in water as this increases the risk of electrical short circuits and motor damage.
- Charge new or long-stored batteries before use and maintain the battery with regular charging every 3 months if not in use.
- Always keep hair, loose clothing, fingers, and all body parts away from openings and moving parts to avoid injuries.
COMPONENTS
OVERVIEW
ASSEMBLY
2- in-1 Brush
- Align the 2-in-1 brush with the end of the vacuum body and push it gently.
- The 2-in-1 brush, can be stored in the vacuum body when it is not in use.
- The 2-in-1 brush is versatile and can be used in both extended and retracted configurations to suit different cleaning needs.
-
Extension Tube
Align the extension tube with the vacuum cleaner body and push it gently.
-
Connecting the brush
Align the brush with the end of the extension tube and and push it gently.
OPERATION
Turning the Vacuum On/Off
- Starting the Vacuum: Once assembly is complete, press the power button to power on the vacuum cleaner. The vacuum will start in normal mode, suitable for regular flooring cleaning. The indicator light will remain blue during this mode.
- Adjusting Suction Power: In normal mode, press the power button again to switch to turbo mode. This mode provides stronger suction power, ideal for cleaning deeper gaps in carpets and other tough areas.
- Turning Off the Vacuum: Press the power button once more to turn off the vacuum. The indicator light will also turn off, signalling that the vacuum is no longer in operation.
Charging the Vacuum Cleaner
- Connecting the Charger: Plug the power adapter into the vacuums’ charging input. The indicator light will flash, signalling that charging has begun. Note: Use only the provided power adapter to avoid damage.
- Monitoring Charge Levels:
- Fully Charged: After approximately 4.5 hours, when the 3 the indicators turn solid blue, the battery is fully charged. Disconnect the charger immediately to preserve battery health.
- Low Power: When only 1 indicator is flashing, the vacuum has low power. The vacuum will automatically shut off to protect the battery. Charge the vacuum as soon as possible.
- Charging Safeguards:
- Charging Lock-out: The vacuum features a safety mechanism that prevents operation while it is charging. If you attempt to turn on the vacuum during this time, the indicator light will flash, but the vacuum will not start.
- After Use: Always disconnect the charger once the battery is fully charged to maintain battery longevity and safety.
CLEANING & CARE
Dust Cup Assembly and Disassembly
Hold the vacuum body and rotate the dust cup assembly to the left and right
until the dust cup is free from the vacuum body. Note: To maintain proper
suction and operation, ensure the dust cup is emptied after each use and
cleaned regularly.
Cleaning the Filters
-
Disassembly: Grasp the air inlet assembly and turn the filter assembly counter-clockwise until the buckle completely releases.
-
Use a soft brush to clean the dust from components.
-
Wipe the dust cup with a damp cloth.
-
Rinse the filter with clean water.
-
Allow the filters and filter housing to thoroughly air dry for 24 hours before reassembly.
Note: Do not use the vacuum filters without the filter installed. -
Installation: Replace the filter assembly onto the vacuum and turn it clockwise until it is securely back in place.
SPECIFICATIONS
- Voltage 7.4V
- Charging adapter input Voltage 100-240V~50/60Hz
- Charging adapter output Voltage Type-C 5V
- Charging Time 3.5h~4.5h
- Running Time 10~18min
TROUBLESHOOTING
Some minor issues can be resolved following the table below. If your problem persists, contact help.Kogan.com for support.
| Fault | Cause | Solution |
|---|---|---|
| Appliance doesn’t start | Flat battery | Charge the vacuum cleaner. |
| Reduced suction |
- The dust cup is full of dust.
- Filter is blocked.
- The air way is blocked
|
- Empty the dust canister.
- Clean or replace the filter.
- Clear the air way
Insufficient application time after charging|
- Insufficient charging time
- Normal discharge reduction in battery
| Fully charge the battery.
Need more information?
- We hope that this user guide has given you the assistance needed for a simple set-up.
- For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>