Philips QT4070/41 Norelco BeardTrimmer User Manual

Philips QT4070/41 Norelco BeardTrimmer

Product Overview

Introduction

Congratulations on your purchase and welcome to Philips!

To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

This maintenance-free Philips vacuum beard trimmer combines innovative technology and outstanding comfort of use. It is excellently suited for cutting and contouring your beard and sideburns.

The integrated vacuum system absorbs cut-off hairs during use and gives you a cleaner washbasin after use. The trimming comb, the self-sharpening cutting unit and the adjustment ring to select hair lengths from 1 to 18mm ensure excellent cutting results and time-saving operation. The ergonomic shape of the appliance allows pleasant and comfortable handling.

All types come with a trimming comb that has been specially designed to offer you a better view when you want to create a stubble look. BT7085/QT4070 comes with a contour-following trimming comb that has been specially designed to trim longer beards.

General Description (Fig. 1)

• Detachable cutting unit
• Lid of hair collection chamber
• Hair-collection chamber and filter
• Adjustment ring (Precision Zoom LockTM)
• Charging light (QT4050 only)
• On/off button
• Turbo button (BT7085/QT4070 only)
• Socket for appliance plug
• Storage pouch (BT7085 only)
• Cleaning brush
• Appliance plug
• Adapter
• Travel lock indicator (BT7085/QT4070 only)
• Hair length indicator (BT7085/QT4070 only)
• Charge level indicator (BT7085/QT4070 only)
• Trimming comb
• Contour-following trimming comb (BT7085/QT4070 only)

Important

Read this user manual carefully before you use the appliance and save it for future reference.

Danger

• Keep the adapter dry.

Warning

• The adapter contains a transformer. Do not cut off the adapter to replace it with another plug, as this causes a hazardous situation.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Always check the appliance before you use it. Do not use the appliance if it is damaged, as this may cause injury.
• Do not use the appliance in the bath or in the shower.

Caution

• Only use the adapter supplied.
• Use, charge and store the appliance at a temperature between 5°C and 35°C.
• Do not charge the appliance in the storage pouch supplied (BT7085 only).
• Do not use the appliance if one of the trimming combs or the cutting unit is damaged or broken, as this may cause injury.
• If the adapter, the cutting unit or one of the trimming combs is damaged, always have it replaced with one of the original types in order to avoid a hazard.
• This appliance is only intended for trimming the human beard. Do not use it for any other purpose.

General

• The adapter is equipped with an automatic voltage selector and is suitable for mains voltages ranging from 100 to 240 volts.
• The adapter transforms 220-240 volts to a safe low voltage of less than 24 volts.
• Noise level: Lc = 65 dB(A).

Electromagnetic fields (EMF)

• This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields.

Preparing For Use

Charging

Charge the appliance fully before you use it for the first time and after a long period of disuse.

Standard charging takes approximately 60 minutes.

• Switch off the appliance before you charge it.
• Insert the appliance plug into the appliance and put the adapter in the wall socket.
• When you start charging the empty appliance, the bottom segment of the charge level indicator flashes orange. When the battery contains enough power for one trimming session of approx. 7 minutes, the bottom segment starts flashing blue.
• First the bottom segment of the charge level indicator flashes blue, then the second segment and so on, until the appliance is fully charged.
• When the appliance is fully charged, all segments of the charge level indicator light up blue continuously.
• If the fully charged appliance is still connected to the mains after 1 hour, the segments of the charge level indicator go out.

Battery Low

• When the battery is almost empty (when there are approx. 7 or fewer trimming minutes left), the bottom segment of the charge level indicator turns orange. When you switch off the trimmer, the bottom segment flashes for a few seconds.

Charging

Charge the appliance fully before you use it for the first time and after a long period of disuse.

Standard charging takes approximately 8 hours.

1. Switch off the appliance before you charge it.
2. Insert the appliance plug into the appliance and put the adapter in the wall socket.

• When you start charging the empty appliance, the charging light flashes green.
• When the appliance is fully charged, the charging light goes out.

Battery Low

• When the battery is almost empty (when there are approx. 7 or fewer trimming minutes left), the charging light lights up orange.

Corded Trimming

When the rechargeable battery is low, you can also run the appliance from the mains.

To use the appliance connected to the mains:

• Switch off the appliance and connect it to the mains.
• Wait a few seconds and then switch on the appliance.

Note: If the battery is completely empty, wait a few minutes before you switch on the appliance.

Using The Appliance

Display Indications

The display is activated when you press the on/off button and when you turn the adjustment ring.

• During trimming, the display provides the following information:
• ’-’ when no comb is attached to the appliance.
• The selected hair length (i.e., the remaining hair length after trimming) in millimeters.
• The remaining charge levels.
• Travel lock indicator if the appliance is locked (see section ‘Travel lock’ in this chapter).
• ’E’ if the cutting unit is blocked.

Beard Trimming

Always comb your beard or moustache with a fine comb before you start trimming.

Trimming With Trimming Comb

The hair length settings are indicated in millimeters on the display of the appliance. The settings correspond to the remaining hair length after cutting. The trimming comb cuts hair to a length of 1-18mm.

If you trim for the first time, start with the maximum hair length setting (18mm).

• Slide the trimming comb onto the appliance.
• Turn the adjustment ring (Precision Zoom LockTM) to the desired hair length setting.
• The display shows the selected hair length.
• Switch on the appliance.

Note: During trimming, you can use the turbo function for extra suction power and trimming speed (see section ‘Turbo function’ below).

• To trim most effectively, move the appliance against the direction of hair growth.

Note: Make smooth and gentle movements and make sure the surface of the trimming comb always stays in contact with the skin.

Note: Do not move the appliance too fast.

• Switch off the appliance after use and clean it (see chapter ‘Cleaning’).

Creating A Stubble Look

• Use the trimmer with the trimming comb set to a hair length of 1mm to create a stubble look.
• If you want even shorter stubble of 0.5mm, use the trimmer without the trimming comb attached.

Trimming Without Trimming Comb

Use the trimmer without trimming comb to trim full beards and single hairs.

• Remove the trimming comb.

Note: Never pull at the flexible top of the trimming comb. Always pull at the bottom part.

• Make well-controlled movements and touch the hair lightly with the cutting unit.

Turbo Function

You can use the turbo function for greater suction power and increased cutting speed.

• Switch on the appliance.
• Press the turbo button.

When you switch off the appliance, the turbo function is deactivated automatically.

Absorbing Cut Hairs

The vacuum system is activated automatically as soon as you switch on the appliance. It absorbs cut hairs during every kind of use, i.e., trimming with and without trimming comb and contouring.

We advise you to empty the hair-collection chamber after each trimming session. When you trim long, dense beards, it may also be necessary to empty the hair-collection chamber during the trimming session in order to maintain optimal suction performance (see chapter ‘Cleaning’, section ‘Hair-collection chamber’).

Note: To ensure optimal functioning of the vacuum system, do not cut off more than approx. 7mm of your overall beard length at a time. If you want to cut your beard shorter, repeat the process one or more times.

Travel Lock

You can lock the appliance when you are going to travel. The travel lock prevents the appliance from being switched on by accident.

Activating The Travel Lock

• Press and hold the on/off button for at least 6 seconds.
• The display counts down from 3 to 1. Then the travel lock indicator appears on the display to indicate that the appliance is locked.

Deactivating The Travel Lock

• Press and hold the on/off button for at least 6 seconds.
• The display counts down from 3 to 1. Then the travel lock indicator disappears from the display to indicate that the appliance is unlocked. Note: The travel lock is deactivated automatically when you connect the appliance to the mains.

Cleaning

Never use scouring pads, abrasive cleaning agents or aggressive liquids such as alcohol, petrol or acetone to clean the appliance.

Do not immerse the appliance in water or any other liquid, nor rinse it under the tap.

Hair-Collection Chamber

• Switch off the appliance.
• Open the lid of the hair-collection chamber.
• Shake the hairs out of the hair-collection chamber and/or remove them with the cleaning brush supplied.
• Clean the filter inside the hair-collection chamber with the cleaning brush supplied. Never use sharp or hard objects to clean the filter, to avoid damaging it.
• Close the lid of the hair-collection chamber.

Appliance

• Pull the trimming comb off the appliance.
• Pull the cutting unit off the appliance.
• Clean the cutting unit and the inside of the appliance with the cleaning brush supplied.
• Put the cutting unit and the trimming comb back onto the appliance (‘click’).

Ordering Accessories

To buy accessories or spare parts, visit www.shop.philips.com/service or go to your Philips dealer. You can also contact the Philips Consumer Care Centre in your country (see the worldwide guarantee leaflet for contact details).

Environment

• Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment.
• The built-in rechargeable battery contains substances that may pollute the environment. Always remove the battery before you discard and hand in the appliance at an official collection point. Dispose of the battery at an official collection point for batteries. If you have trouble removing the battery, you can also take the appliance to a Philips service center. The staff of this center will remove the battery for you and will dispose of it in an environmentally safe way.

Removing The Rechargeable Battery

Do not connect the appliance to the mains again after you have opened it.

Follow the steps below to remove the rechargeable battery.

• Disconnect the appliance from the mains and let the appliance run until the motor stops.
• Open the lid of the hair-collection chamber.
• Remove the 4 screws inside the hair-collection chamber with a screwdriver.
• Pull the hair-collection chamber out of the appliance with some force.
• To remove the front panel, wedge a screwdriver between the front panel and the inside of the appliance.
• Remove the 4 screws on the inside of the appliance.
• Remove the inner panel.
• Remove the printed circuit board with the rechargeable battery connected to it.
• Cut the wires between the printed circuit board and the rechargeable battery.

Guarantee and support

If you need information or support, please visit www.philips.com/support or read the separate worldwide guarantee leaflet.

FAQ’s

How do I charge the Philips QT4070/41 Norelco BeardTrimmer?

The Philips QT4070/41 Norelco BeardTrimmer comes with a built-in rechargeable battery. To charge it, simply connect the trimmer to the included charging cable and plug it into a power source. It usually takes a few hours to fully charge.

How long does the battery last on a full charge?

When fully charged, the Philips QT4070/41 Norelco BeardTrimmer can provide up to 50 minutes of cordless use. This allows for multiple trimming sessions before needing to recharge.

Can I use the trimmer while it's charging?

Yes, the Philips QT4070/41 Norelco BeardTrimmer supports both corded and cordless operation. This means you can use it while it's plugged in and charging.

How do I adjust the cutting length?

The Philips QT4070/41 Norelco BeardTrimmer features an integrated zoom wheel that allows you to easily adjust the cutting length. Simply turn the wheel to select the desired length setting, which ranges from 0.5mm to 18mm.

Can I use the trimmer on wet hair?

Yes, the Philips QT4070/41 Norelco BeardTrimmer is designed for both dry and wet use. You can use it on wet hair, and it's also fully washable for easy cleaning.

Does the trimmer come with different attachments?

Yes, the Philips QT4070/41 Norelco BeardTrimmer typically comes with various comb attachments that allow you to achieve different beard lengths and styles. These attachments can be easily attached and detached from the trimmer.

How do I clean the trimmer?

To clean the Philips QT4070/41 Norelco BeardTrimmer, detach the comb attachment and rinse it under running water. You can also use the included cleaning brush to remove any trapped hairs from the trimmer blades. Make sure the trimmer is turned off before cleaning.

Can I use the trimmer on other areas of my body?

While the Philips QT4070/41 Norelco BeardTrimmer is primarily designed for beard trimming, it can also be used on other areas of the body like the chest, underarms, or legs.

Is the trimmer cordless or corded?

The Philips QT4070/41 Norelco BeardTrimmer is a cordless trimmer. It operates on a rechargeable battery, allowing for more freedom of movement during use.

Does the trimmer come with a warranty?

Yes, the Philips QT4070/41 Norelco BeardTrimmer usually comes with a warranty provided by Philips. The duration and terms of the warranty may vary, so it's recommended to check the product documentation or contact Philips customer support for specific warranty details.

What is a vacuum trimmer?

Unlike a standard electric beard trimmer, vacuum trimmers immediately suck up the vast majority of cut hair as you trim, leaving fewer stray hairs for you to clean up later.

Is 10mm a good beard length?

Most men find that 10mm is a great place to keep a short beard without falling into stubble territory and without the beard getting too long to handle.

Download This PDF Link: Philips QT4070/41 Norelco BeardTrimmer User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>