kogan com KASBD180HA Dolby Soundbar User Guide

May 15, 2024
Kogan com

kogan com KASBD180HA Dolby Soundbar

kogan-com-KASBD180HA-Dolby-Soundbar-product

Product Information

Specifications

  • Power output: 180W
  • Speaker drivers: 2.1CH
  • Bluetooth version: 5.0 + EDR
  • Bluetooth range: (not specified)
  • Connections: HDMI (ARC), OPTICAL, USB IN, AUX IN, COAXIAL
  • Power supply: Built-in AC 100-240V
  • Dimensions: Soundbar – 904 x 108 x 72mm, Subwoofer – 240 x 240 x 420mm

Product Usage Instructions

Safety & Warnings

  • Follow the safety guidelines provided in the user manual to ensure the safe usage of the product.

Components List

  • Check all components listed in the manual to ensure everything is included.

Overview

  • Soundbar Control Panel: Includes standby on/off, volume control, and mode selection.
  • Connection Panel: HDMI (ARC), OPTICAL, USB IN, AUX IN, COAXIAL inputs.
  • Modes: BT (Bluetooth), USB, AUX, OPT, COA, ARC.
  • LED Display: Indicates current mode.

Operation

  • Follow instructions for wireless subwoofer connection and input functions to ensure proper setup and usage.

Remote Control Functions

Use the remote control to adjust treble/bass levels, volume, playback controls, mode selection, EQ presets, and more.

Frequently Asked Questions (FAQ):

How do I pair my Bluetooth device with the soundbar?

  • To pair a Bluetooth device, ensure the soundbar is in BT mode and search for it on your device’s Bluetooth settings. Select the soundbar to pair.

What should I do if the wireless subwoofer is not connected?

  • If the subwoofer is not connected, follow the provided steps in the manual to pair it with the soundbar.

How can I adjust the EQ presets on the soundbar?

  • Use the EQ button on the remote control to toggle between different EQ presets available on the soundbar.

SAFETY & WARNINGS

Attention

  • To reduce the risk of electronic shock or fire, do not remove the cabinet cover. In the case of maintenance or repairs, contact help.kogan.com for all assistance. Do not attempt to make repairs without authorization.
  • Do not operate this product in extreme temperatures, direct sunlight, or wet environments. Do not place the unit in a location where the exposure to these environments is likely to occur.
  • Do not drop or mishandle the product.
  • If liquids or foreign debris falls into the unit, disconnect the power and cease use immediately. Do not resume operation until it has been checked by a service professional.

COMPONENTS LIST

  • Soundbar unit x 1
  • Subwoofer unit x 1
  • mote control x 1
  • Power cord x 2
  • 3.5mm to 3.5mm cable x 1
  • Wall-mounting kit x 1
  • User guide x 1

OVERVIEW

Soundbar control panelkogan-com-KASBD180HA-Dolby-Soundbar-
fig-1

  • Standby on/off
  • + Increase volume
  • – Decrease volume
  • M Mode selection

Connection panelkogan-com-KASBD180HA-Dolby-Soundbar-
fig-2

  1.  HDMI (ARC)
  2. OPTICAL
  3. USB IN
  4. AUX IN
  5. COAXIAL
  6. ON/OFF
  7. AC power in

Modes

LED Display Mode Description
Red light Standby Press the standby button to turn on/off
“BT” **** Bluetooth Available for pairing with bluetooth compatible devices

such as smartphones or laptops
“USB”| USB input| Use to connect a flash drive for direct MP3 / WAV / FLAC audio playback (FAT32 format, 64GB max)
“AUX”|
Auxiliary input| Use to connect compatible devices using a 3.5mm stereo jack cable
“OPT”| Optical input| Use to connect compatible devices using an optical cable*
“COA”| *** Coaxial input| Use to connect compatible devices using a coaxial cable
“ARC”| *** HDMI ARC input| Use to connect compatible devices using an HDMI cable – compatible with TVs or other devices with ARC outputs

Using + / – buttons

+| Press + to increase volume in any mode.

In BT or USB modes, long-press + to increase volume and short-press to skip to the next track.

---|---
| Press to decrease volume in any mode.

In BT or USB modes, long-press to decrease volume and short-press to skip to the previous track.

Remote Controlkogan-com-KASBD180HA-Dolby-Soundbar-
fig-3

OPERATION

Wireless subwoofer connection

  • Power on both the Soundbar and Subwoofer. The subwoofer’s LED light will be flashing continuously if not connected. Set the soundbar to Bluetooth mode (“BT” will show on the LED display).
  • Hold the Play/Pause button for at least 3 seconds, until the display shows “PAIR”. The subwoofer and soundbar will automatically begin pairing. The first connection can take 10 seconds or more.
  • When connected successfully, the soundbar will make a chime sound, and the subwoofer’s LED will remain solidly lit.

Input Functions

  • Power on/off: Press the Power on/off button on the remote control or soundbar control panel to turn the unit on and off.

  • HDMI (ARC): Connect an HDMI ARC-compatible device to the HDMI (ARC) port on the soundbar using an HDMI cable (not supplied). Select HDMI (ARC) mode either by pressing the HDMI (ARC) button on your remote control or repeatedly pressing the Mode button on the soundbar control panel until “ARC” is displayed on the LED display. Ensure HDMI ARC is selected as the TV’s audio output (check your TV’s settings), then adjust the volume of the soundbar using the soundbar’s remote control or control panel.
    Auxiliary in: Connect a compatible device using the supplied 3.5mm cable. Select auxiliary mode either by pressing the “AUX” button on your remote control or repeatedly pressing the Mode button on the soundbar control panel until “AUX” is displayed on the LED display. Ensure the connected device is producing an audio signal, then adjust the volume of the soundbar using the volume up and volume down buttons on the remote control or soundbar control panel.

  • Optical in Connect a compatible device to the optical input on the soundbar using a digital optical cable (not supplied). Select optical mode either by pressing the “OPT” button on your remote control or repeatedly pressing the Mode button on the soundbar control panel until “OPT” is displayed on the LED display. Ensure Optical SPDIF is selected as the TV’s audio output, then adjust the volume of the soundbar using the volume up and volume down buttons on the remote control or soundbar control panel.

  • Coaxial in: Connect a compatible device to the coaxial input on the soundbar using a digital coaxial cable (not supplied). Select coaxial mode by repeatedly pressing the Mode button on the soundbar control panel until “COA” is displayed on the LED display. Ensure Coaxial is selected as the TV’s audio output, then adjust the volume of the soundbar using the volume up and volume down buttons on the remote control or soundbar control panel.

  • Bluetooth: Press the “BT” button on the remote control or repeatedly press the Mode button on the soundbar control panel until BT is shown on the LED display. The LED display will flash to indicate that the soundbar is in Bluetooth pairing mode. Ensure that the device you wish to connect is also in pairing mode and search for Kogan 180W Dolby SB” in its device list. When the two devices are paired, the LED display on the soundbar will remain solidly lit. The soundbar will now automatically re-pair with this device whenever it is within range and has Bluetooth turned on.

  • Notes: Long-press the BT button on the remote control to disconnect or reconnect the Bluetooth between the phone and the soundbar.

  • USB media mode: The soundbar is compatible with USB flash drives of up to 64GB (Fat32 format) in size and can play MP3/WAV/FLAC audio files directly. Insert a compatible drive (not supplied) into the USB port on the back of the soundbar and the unit will automatically switch to USB mode and play the first compatible track.

  • Press the Repeat Playback button on the remote control to toggle between single track repeat (“ONE”), or all track repeat (“ALL”) to repeat all songs.
    The media player also has a memory function that will recall and continue from the last played point when a USB flash drive that has previously been used with the soundbar is reinserted.

  • Equalizer   modes: The soundbar has three equalizer presets, tailored to complement various styles of audio. Press the EQ button on the remote to cycle between Music (“EQ1”), Movie (“EQ2”), and News (“EQ3”) presets.

  • Wall mounting: The soundbar has two keyhole slots on the back to enable wall mounting using the wall-mounting kit provided.

Ports on TVkogan-com-KASBD180HA-Dolby-Soundbar-
fig-4

SPECIFICATIONS

Power output 180W
Speaker drivers ·   58 x 90mm / 25W full range speakers x 4

·   8”/ 80W subwoofer x 1

Bluetooth version| 5.0 + EDR
Bluetooth range| 10m
**Connections**| ·   HDMI (ARC)

·   Optical

·   Coaxial

·   USB 2.0

·   3.5mm Auxiliary

Power supply| Built-in AC 100-240V
Dimensions| Soundbar: 904 x 108 x 72mm

Subwoofer: 240 x 240 x 420mm

Need more information?

  • We hope that this user guide has given you the assistance needed for a simple set-up.
  • For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

Documents / Resources

| kogan com KASBD180HA Dolby Soundbar [pdf] User Guide
KASBD180HA, KASBD180HA Dolby Soundbar, Dolby Soundbar, Soundbar
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Kogan com User Manuals

Related Manuals