EDIFIER MP230 Portable Bluetooth Speaker User Manual
- May 15, 2024
- Edifier
Table of Contents
EDIFIER MP230 Portable Bluetooth Speaker
Specifications
- Output Power: 10W + 10W
- Frequency Range: 70Hz – 13KHz
- Input: 5V 2A
- Frequency Band: 2.402GHz ~ 2.480GHz
- RF Output Power: 10 dBm (EIRP)
Important Safety Instructions
Excessive loud music can lead to hearing loss. Keep the volume at a safe level.
Proper disposal of this product. This symbol indicates that this product should not be disposed of with other household waste throughout the European Union. To prevent potential damage to the environment or human health from uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse of material resources. To dispose of your used device, you can use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally friendly reuse.
| Output Power | 10W+10W |
|---|---|
| Frequency Range | 70Hz-13KHz |
| Input | 5V 2A |
| EU Declaration | Frequency Band: 2.402GHz ~ 2.480GHz |
RF Output Power: 10 dBm (EIRP)
No restrictions on use.
Product Information
The EDIFIER MP230 is a portable Bluetooth speaker designed to deliver high- quality audio performance. It features various input modes including Bluetooth, AUX, micro SD (TF) card, and USB audio streaming. The speaker comes with a USB Type-C data cable, an audio cable, and a user manual for easy setup and operation.
Battery Safety
Battery-powered products: Risk of explosion if the battery is placed incorrectly. Replace only with the same or equivalent type. Never disassemble, strike, crush, or throw batteries into the fire. Do not expose batteries to conductive materials, liquids, fire, or heat. Prevent any metal object from coming into contact with the two battery poles. If the battery is swollen, leaking, discolored, smells, or appears abnormal, stop using it. Do not use the battery after it has been submerged in water. Improper use of the battery can lead to explosion or leakage, potentially causing skin burns or other injuries; in the event of a battery leak, handle it with care and dispose of the battery immediately in a manner consistent with applicable local laws and regulations. If the battery is exposed to extremely low air pressure, this could lead to an explosion or the leakage of flammable liquid or gas.
What’s in the Box
- Speaker
- USB Type-C data cable
- Audio cable
- User manual
Usage Instructions
Powering On/Off:
To power on the speaker, press and hold the power button for 1.5 seconds.
The LED indicator will show the status of the input mode. To power off, press
and hold the power button again for 1.5 seconds.
Changing Input Modes:
You can switch between different input modes by pressing the corresponding
buttons on the speaker. The LED indicator will change to show the selected
input mode.
Adjusting Volume and Tracks:
Use the buttons on the speaker to adjust the volume, play/pause music, skip
tracks, and go to the previous track depending on the input mode
(Bluetooth/micro SD card/USB audio streaming).
Charging the Speaker:
Connect the speaker to a power source using the provided USB Type-C cable
for charging. The red LED indicator will show when the speaker is charging and
turn off when fully charged.
Audio Playback:
Ensure your audio files are compatible with the speaker (MP3/WAV formats
recommended). Connect your device to the speaker via Bluetooth or using the
AUX cable for audio playback.
Functional Operation
- Press: Play/Pause
- Press: Volume down
- Hold: Previous track (Bluetooth/micro SD (TF) card/USB audio streaming)
- Press: Volume up
- Hold: Next track (Bluetooth/micro SD (TF) card/USB audio streaming)
- Status indicator light: Blue: Bluetooth input, Green: AUX input, Yellow: micro SD (TF) card, Red: USB audio streaming input
- Hold for 1.5 sec: Power on/off
- Press: Input mode switch
- Press: Bluetooth input
- Hold for 2 sec: Disconnect Bluetooth and open Bluetooth pairing
- Charging port/USB audio streaming input
- Charging indicator light: Red light on = charging, Red light off = fully charged
- Micro SD (TF) card slot
- AUX input
Troubleshooting
No sound: Ensure the audio source and speaker are correctly connected. The
volume on some devices may be too high. Disconnect the audio cables and turn
up the volume; if no sound is heard at a distance of 1 meter from the speaker,
this product is not at fault.
Contact Information
For additional information or support regarding the EDIFIER MP230, please
visit the following websites:
www.edifier.com – Headphones, Speakers | A Passion
for Sound -【Edifier USA】
www.edifierla.com – For Spanish/Portuguese
speakers.
FAQ
Where can I find more information or get support for my EDIFIER MP230?
For more information about EDIFIER, visit
www.edifier.com. For warranty questions, visit the
relevant country page on www.edifier.com and read
the Warranty Terms section. For USA and Canada:
service@edifier.ca. For South America, visit
www.edifier.com (English) or
www.edifierla.com (Spanish/Portuguese) for local
contact information.
Why is there no sound coming from the speaker?
If you are not hearing any sound from the speaker, check if the volume on both your audio source and the speaker is at an appropriate level. Disconnect audio cables, increase the volume, and ensure there are no obstructions between the speaker and your device.
How can I extend the battery life of the speaker?
To extend the battery life of the speaker, it is recommended to charge it fully before initial use and avoid overcharging. Additionally, lower the volume when not in use to conserve battery power.
How do I charge the MP230?
Use the provided USB Type-C data cable to connect to a power source.
Can I play music from a micro SD (TF) card?
Yes, the speaker has a micro SD (TF) card slot compatible with MP3/WAV format and certain WMA/APE/FLAC files.
What should I do if the battery is leaking or swollen?
Immediately stop using the battery, handle it with care, and dispose of it in accordance with local regulations.