TETOTE 36 Inch Matte Metal Framed Circle Bathroom Mirrors User Manual
- June 16, 2024
- TETOTE
Table of Contents
Metal Frame Mirror
Installation Instruction
If you have any problem, please feel free to contact us on
sales@tetote-tech.com
CONTACT US
Note: After opening the package, Please inspect the product immediately for damage in transit or missing parts. If there is any missing, Please contact us by (sales@tetote-tech.com). or you can contact us at Amazon by following these steps:
- Open “Orders” at Amazon
- Find the product you have purchased and open the product page
- Click Sold by “TETOTE” -Click”Ask a question”
- Click “An order I have placed”
- Click “Your product” -Click “Other” -Click “Troubleshooting”
Then you can send us messages, we will reply within 24 hours.
Installation Tools
2. Measure distance between frame and hook (A). Mark the position of the hanging board on the wall.
3. Mark the holes for the hanging board on the wall.Then use a spirit level to make sure the hole is on a straight horizontal line.
4. Drill two holes at the marked spots,Then hammer the wall anchor into the wall.
Thickness of wall ＞ 16mm ( 1/4″ (6mm) drill bit, drilling depth in
131/32″(50mm) )
Thickness of wall 8 ~ 16mm ( 25/64″ (10mm) drill bit )
Thickness of wall ＜ 8mm Unapplicable
Note: Please wear goggles and pay attention to safety.
5. Screw the hanging board.
6. Tilt the mirror, align it with the fixed hanging board and hang the mirror onto the board. (please comfirm the hook is hanging on the screw safely when viewed from the side.)
7. Take off the paper of Hook-and-loop fastener on the backboard, and make it stick to the wall tightly. (optional)
Accessories: 2pcs screws, 2pcs anchors of type A, 2pcs screws, 2pcs anchors of type B, 1pc hanging board
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>