FOSSiBOT F1200 Portable Power Station User Manual

FOSSiBOT F1200 Portable Power Station

Specifications

• Product Name: F1200 Portable Power Station
• Power Output: 1200W
• Battery Capacity: Not specified
• AC Output Interface
• DC Output Interface: USB, cigarette lighter, DC output
• Charging Methods: mains AC, solar panels, vehicle charging
• UPS Mode Switchover Time: < 10ms
• Multiple Protection Mechanisms: battery, circuit, structure

Product Usage Instructions:

Precautions For Use

1. Avoid high temperature, humidity, and direct sunlight.
2. Do not disassemble or modify the product.
3. Avoid dropping the product.
4. Keep out of reach of children.
5. Use only original accessories.
6. Charge directly using a wall socket; do not use extensioncords.
7. Turn off and unplug when not in use; discharge to 50% for long-term storage.
8. Dispose of the product properly when reaching end of life.

Charging the Product
To charge the product, plug it directly into a wall socket using the provided AC charging cable. Avoid using extension cords or other devices that may cause damage or fire hazards. You can also charge the product using solar panels or vehicle charging cable.

UPS Mode
In UPS mode, the product offers seamless switching with a switchover time of less than 10ms. This mode ensures uninterrupted power supply during power outages or fluctuations.

Storage and Maintenance
When not in use, turn off the product and unplug it. For long-term storage, discharge the product to 50% battery level and store it in a cool, dry place. Follow a three-month cycle to maintain product performance and prolong its lifespan.

Disposal
When the product reaches the end of its life, dispose of it according to local laws and regulations for electronic waste recycling. Do not discard the product in regular trash.

FAQ

• Q: Can I use non-original accessories to charge the product?
  A: It is recommended to use only the original accessories provided with the product to avoid any defects or malfunctions caused by incompatible accessories.

• Q: How should I store the product when not in use?
  A: Store the product in a cool, dry place out of reach of children. Ensure it is turned off and unplugged when idle for extended periods.

Portable Power Station
User Manual

Hi dear, thank you very much for purchasing and experiencing the 1200W portable power station. Before operating this product, please carefully read the user manual for proper operation.
According to the transportation requirements of the international customs for battery products, the battery level of this product is only less than 30% when it leaves the factory. Please fully charge the product after unpacking it to start the experience tour of 1200W.

Precautions For Use

1. Please avoid long-term storage and use of this product in environ ments with high temperature and humidity or direct sunlight to avoid shortened battery life and other failures. The product should not be close to the fire source, otherwise it may cause a major fire or accident.
2. This product must not be disassembled or modified. Improper opera-tion may cause product malfunction or even fire.
3. Be careful not to drop the product.
4. Please store or use this product out of the reach of children, otherwise the product may be dropped or collided and cause bodily injury to children.
5. Please use our original accessories, and we will not guarantee the defective products caused by the use of non-original accessories.
6. Please directly plug in the wall socket to charge the product, do not use extension cords or cable taps, otherwise there is a risk of damage to the extension cords and cable taps or even a fire; If the extension socket is plugged in to charge this product, please do not connect other electri-cal appliances to this socket, otherwise the household meter may trip.
7. When the product is not in use or idle, please turn it off and unplug the power cable. If it needs to be idle for a long time, please consume the product from a fully charged state to an uncharged state, then recharge it to about 50% of the battery level and store it. In order to prolong the life of the product, please take three months as a cycle, operate and keep it in this way.
8. If the product reaches scrap conditions, please discard or recycle the product in accordance with local laws.

Packing List

Product Introduction

This product is a portable power device with a built-in battery pack with charge/discharge function. It includes both AC output interface and DC output interface such as USB output, cigarette lighter output, DC output, etc. It also has functions such as display, interface control, protection, and alarm. Moreover, this product can be charged by mains AC, solar panels and vehicle charging.

The following are the main features of this product:

• Equipped with LiFePO4 battery, the battery capacity is as high as 1024Wh, and the safety level is extremely high.
• 1200W pure sine wave AC output can meet almost all daily electron-ic equipment and small household appliances.
• Two-way fast charging technology is adopted to fully charge the product in about 1.2 hours.
• A great variety of output interfaces such as USB-A, Type-C PD3.0, cigarette lighter output, etc., meet many different application scenar-ios.
• In UPS mode, the switchover time is less than 10ms which is truly seamless switching.
• Multiple protection mechanisms such as battery, circuit, structure, etc., guarantee the product safety.

Button Function Introduction

1. Power ON/OFF Button

2. USB ON/OFF Button

3. DC ON/OFF Button

4. LCD Screen

5. Input Power Knob

6. Cooling Air Duct

7. AC Switch  (manually switch to 50/60Hz)

8. Solar Input Port ( for solar panel)

9. AC Input

10. Overload Protection Button

11. LED Light Button  (switch to different mode)

12. Power ON/OFF Button
    Instructions: Press and hold the power button for 3S to wake up the system, turn on the LCD display, and press and hold again for 3S to turn it off.

13. USB ON/OFF Button
    Instructions: Short press the USB button to turn on the USB output port, and short press again to turn it off.

14. DC ON/OFF Button
    Instructions: Short press the DC button to turn on the DC output port, and short press it again to turn it off.

15. LCD Screen
    Display the product’s battery level and usage status tips.

16. Input Power Knob
    When the product is connected to the AC mains for charging, the power is adjusted according to the actual input voltage. The cloc-kwise rotation increases the input power, and the counterclockw-ise rotation decreases the input power. It is worth noting that char ging this product at low power is beneficial for extending battery life.

17. Cooling Suction/Exhaust Port
    When the product reaches the temperature threshold set by the system, the cooling fan will automatically run, accompanied by a certain fan noise (fan noise below 60dB is normal). Do not block the cooling suction/exhaust port during use of this product, and do not place any object within the range of 30CM.

18. AC Switch (AC output port, the sum of electrical load power should be ≤1200W)
    Tap the AC button to enable the AC output function. Since there may be differences in the AC output frequency in different regions, if you need to switch the frequency, the operations are as follows: Press and hold the AC button for 3 seconds to enter the frequency switching mode, the 50Hz or 60Hz icon will flash on the display, short press the AC button again to select 50Hz or 60Hz; when the icon stops flashing and displays 50Hz or 60Hz, it indicates the switch is successful.

19. Solar Input Port
    This interface supports solar panel input or car charger input. For details, please refer to “Solar Panel Connection” on page 8 of this manual and “Car Charging” on page 9.

20. AC Input
    To charge the product by a household socket can achieve 1000W fast charging. It only takes about 1.2 hours to fully charge from 0 to 100%. When charging in this way, please pay attention to the following points:

    • Please directly plug in the wall socket to charge the product, do not use extension-cords or cable taps, otherwise there is a risk of damage to the extension cords and cable taps or even a fire.
    • If the extension socket is plugged in to charge this product, please do not connect other electrical appliances to this socket, otherwise the household meter may trip.

21. Overload Protection Button
    When the power supply current is unstable due to lightning or other reasons, and there is a large current input at the AC Input, in order to protect the product, the overload protection function (safety circuit breaker) will activate and cut off the AC input port.
    Please follow the sequence below to restore the AC input function:

22. Turn off the power button and unplug all ports.

23. After confirming that there is no abnormality in each part, turn on the power button.

24. Press the overload protection button, connect the AC Cable to restore the AC input.

25. Light Button
    Instructions: Short press the Light Button, the LED lights are all on; short press again, the LED light enters the SOS mode, short press in turn, enter the strobe mode, and finally the LED light turns off (LED in any mode, long press the light button for > 1 second , directly turn off the LED light).

Introduction of Display Interface

1. Connected to the AC Mains
2. XT60 Input
3. Battery Level Percentage
4. AC Output
5. USB Output
6. PD3.0 Output
7. High/Low Temperature
8. Fan Status
9. Cigar Lighter (12V) Output
10. Protection LED Light
11. Input Power in Total
12. Output Power in Total
13. Charge time/Using Time
14. UPS mode

Screen Display Description
Power displ ay: When the product is in the charging state, the battery progress bar rotates continuously in the form of a clockwise marquee, and the battery level percentage gradually increases; when the product battery level is 0, the battery level percentage icon flashes.
Input and output status: When the product is working, the total input power, total output power and the cursor corresponding to the working area will be displayed on the screen.
Alarm prompt: See the following troubleshooting sheet for details.

Troubleshooting Sheet

press the switch in the area corresponding to the icon to remove the alarm.

The temperature warning icon flashes and beeps.

| The temperature of the productis too high or too low.| Take the product out of the charging state remove all loads, turn the power off, wait for the device to reach a suitable working temperature, then the alarm is removed.

The icon of connecting to the AC mains flashes and the product cannot be charged.

| The charging cable is poorly connected.| Verify the connection status

of the cable and the power supply.

**** The overload protection function is enabled.|

• Turn off the power button and unplug all ports.
• After confirming that there is no abnormality in each part, turn on the power button.
• Press the overload protection button, connect the AC line to restore the AC input.

UPS mode

UPS Feature
This product has the function of backup uninterruptible power supply. The usage and operation precautions are as follows:
As shown in Pic 1 below, when the product is connected between the wall socket and the electrical appliance, and the power supply and AC switch of the product are in the ON state, the product enters the UPS working mode. The AC mains in the socket supplies power to the electrical appliance through the bypass circuit, and also charges the product.
*In UPS mode of the China, United Kingdom, Europe and South Korea, AC output of the maximum power below 1200W, AC output over 1200W, “ ” AC output icon flashes indicating overload.

As shown in Pic 2 below, when the AC mains at the socket end is disconnected, the bypass output inside the product stops working, the product switches to a bidirectional inverter circuit within 10ms, and the circuit outputs supply power to the electrical appliance to ensure that the electrical appliance is uninterrupted and works normally during the process.

Connection of Solar Panels

Under the condition of light, this product can be connected to the solar panel and getting charged. The charging power is determined according to the conditions of light and weather.
In this charging mode, we support solar panel input within 200W, and the input voltage cannot exceed 50V, otherwise the product abnormali-ty caused by it will not be covered by the warranty.

We recommend the following two charging schemes:

Scheme one:
Portable Power Station Charging Area

Scheme Two:
Portable Power Station Charging Area

Car/Vehicle Charging

When the car is in the process of starting, connect the car charging port on the car and the product through the car charging cable to charge the product. The connection method is shown in the picture below:
This product supports 12V/24V car charger charging, please pay attention to the following two points when using this method to charge:
Please use it when the car started, otherwise the car battery may be exhausted.
Vehicle charging power is usually in the range of 90W-120W, and the charging time is long.
If fast charging is required, the AC mains charging is recommended.

Product Specifications

AC Output

| 50/60Hz (switchable), rated 1200W, pure sine wave with overload, short circuit protection
USB-A Output| QC3.0 18W max 2
Type-C CD Output| (PD20W) 1
Type-C ® Output| (PD100W)*1 Included PD3.0 protocol
Car Charging Output| 12V/10A
Shutdown Current| <500uA
Working Temperature| -10~40°C
Environment Humidity| s;90%RH
Cycle Times| >3500 Times

Battery Specifications

Warranty Card

Warranty Card

Name|
Address|
Tel|
Mail|
BrandծOrder number|
Buying date|
Fill in the date|
**** What is the product failure|
Please fill in all the above items.

This product provides a 24-month warranty service from the date of purchase

• If there is a quality problem within the range of normal use, we provide warranty service.
• After purchasing our company’s products, please keep this product together with invoices and other items. When maintenance services are needed, please provide information according to our company’s request.
• In the case where the warranty is damaged or altered，and no stamp of the sales store on the warranty, the warranty service may not be provided.
• Damage caused by use beyond the normal range of use is not covered by the warranty service.
• The content of the warranty scope shall be subject to the content recognized by the company.
• Even within the scope of the warranty, sometimes it will be exchanged for products with the same function. The shipping and repair fees for products outside the warranty range shall be paid by the customer.
• Sometimes the specifications and functions of the product will be updated without prior notice.

Disclaimer
Before use, please read the user manual of this product to ensure full understanding and correct use. After reading, keep the user manual properly for future reference. If you do not operate this product correctly, you could cause serious injury to yourself or others, or result in damage to the product and property. Once you use this product, you are deemed to have understood, recognized and accepted all terms and content of this document. Users undertake to be responsible for their own actions and all consequences arising therefrom. We are not responsible for all losses caused by the user’s failure to use the product in accordance with the User Manual.
In compliance with the law, the company has the final right to interpret this document and all related documents of the product. If it is updated, revised or terminated without prior notice, please visit the our official website for the latest product information.

Manufacturer: Shenzhen Qichang Intelligent Technology Co., Ltd.
Address: Room 510, 5th Floor, Building 7, Yunli Smart Park, Bantian Street, Longgang District,
Shenzhen,GD CN
Website: www.fossibot.com
Technical service email: [email protected]

https://eu.fossibot.com/

References

• FOSSiBOT: Portable power stations| Rugged Smartphones| Rugged Tablets

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>