FOSSiBOT DT1 Rugged Tablet Unboxing User Manual

: May 15, 2024
: FOSSiBOT

Table of Contents

DT1 Rugged Tablet Unboxing
Specifications:
Product Usage Instructions:
1. Power On/Off:
2. Camera Usage:
3. Adjusting Volume:
4. SIM Card Insertion/Removal:
- Frequently Asked Questions (FAQ):
1. How do I charge the device?
2. Can I expand the storage capacity?
3. How do I access the user manual online?

DT1 Rugged Tablet Unboxing

“`html

Specifications:

Manufacturer: Shenzhen Qichang Intelligent Technology Co.,
Ltd
Website: www.fossibot.com
Screen: 3-Color Indicator Ligit L-sensor
Front Camera: 5ZQF$1PSU 4*.5’DBSE
SIM Card Ejector
User Manual Included
Cameras Flashlight
Power, Volume+, Volume-
Microphone
Air Hole for ventilation

Product Usage Instructions:

1. Power On/Off:

To power on the device, press and hold the power button until
the screen lights up. To power off, press and hold the power button
and follow the on-screen prompts.

2. Camera Usage:

Open the camera application from the home screen to use the
front camera. You can switch between photo and video modes and
adjust settings as needed.

3. Adjusting Volume:

Use the volume+ and volume- buttons to adjust the device’s
volume levels. Press volume+ to increase volume and volume- to
decrease it.

4. SIM Card Insertion/Removal:

Use the provided SIM card ejector tool to insert or remove the
SIM card from the device. Follow the user manual for detailed
instructions on how to do this correctly.

Frequently Asked Questions (FAQ):

1. How do I charge the device?

To charge the device, connect the provided USB cable to the
charger and plug it into a power source. Insert the other end of
the cable into the device’s charging port. The device will indicate
when it is charging.

2. Can I expand the storage capacity?

The device may support external storage options such as microSD
cards. Refer to the user manual for information on how to expand
storage and compatibility requirements.

3. How do I access the user manual online?

You can access the user manual online by visiting the
manufacturer’s website at www.fossibot.com and navigating to the
support or downloads section.

“`

www.fossibot.com
Manufacturer:Shenzhen Qichang Intelligent Technology Co., Ltd Address:Room 510, 5th Floor, Building 7, Yunli Smart Park, No.7 Changfa Middle Road, Yangmei Community, Bantian Street, Longgang District, Shenzhen China

DT1
Website: www.fossibot.com

4QFBLFS4PVOE)PMF 4QFBLFS4PVOE)PMF

Screen

3-Color Indicator Ligit L-sensor
Front Camera

5ZQF$1PSU 4*.5’DBSE

4QFBLFS4PVOE)PMF

SIM Card Ejector

User Manual

%5

11000
18

FOSSiBOT

Cameras Flashlight
Power Volume+ Volume-
Microphone

Air Hole

www.fossibot.com

fossibot.com

-BVUTQSFDIFS 4DIBMMMPDI

Package box-Pad-User Manual-USB Cable-Charger-SIM card pin

Bildschirm

3-farbig Indikator Ligit L-Sensor
Vordere Kamera

5ZQ$”OTDIMVTT 4*.5′,BSUF

-BVUTQSFDIFS 4DIBMMMPDI

Benutzerhandbuch
%5
11000
18
FOSSiBOT

Kameras Taschenlampe
Leistung Lautstärke+ Lautstärke-
Mikrofon

Luftloch

fossibot.com

Verpackungseinheit-Pad-Benutzerhandbuch-USBKabel-Ladegerät-SIM-Kartenstecker

3 L-

$ 4*.5′

%5
11000

18
FOSSiBOT

+ –

fossibot.com

0SJDF4POPSF EV)BVU1BSMFVS

Filtrer

Indicateur lumineux à 3 couleurs Capteur L
Caméra Frontale

–

SIM-

USB –

1PSUEF5ZQF$ $BSUF4*.5′

0SJDF4POPSF EV)BVU1BSMFVS

Appareils Photo Lampe de Poche

%5
11000

Mode d’emploi

Pouvoir
Volume+ Volume-

18
FOSSiBOT

Microphone

Trou d’air

fossibot.com

Boîte d’emballage – tablette – manuel d’utilisation câble USB – chargeur – broche pour carte SIM

/

%5

& 6,07)

11000

18
FOSSiBOT

fossibot.com

‘PSP4POPSP EFMMBMUPQBSMBOUF

Schermo

Indicatore a 3 colori Ligit L-Sensore
Fotocamera Frontale

86% 6,0

1PSUBEJ5JQP$ 4DIFEB4*.5’

‘PSP4POPSP EFMMBMUPQBSMBOUF

Macchine Fotografiche Torcia Elettrica

%5
11000

Manuale utente
18
FOSSiBOT

Energia Volume+ Volume-
Microfono

Foro d’aria

fossibot.com

Scatola della confezione, pad, manuale d’uso, cavo USB, caricabatterie, spinotto per scheda SIM

0SJDJPEFTPOJEP 0SJDJPEFTPOJEP

EFMBMUBWP[

Pantalla

3 colores Luz indicadora Sensor L
Cámara frontal

%5
11000

1VFSUPUJQP$ 5BSKFUB4*.5′

0SJDJPEFTPOJEP EFMBMUBWP[

Manual del usuario
18
FOSSiBOT

Cámaras Linterna
Fuerza Volumen+ Volumen-
Micrófono

Agujero de aire

fossibot.com

3-

Ligit

L

Caja, almohadilla, manual de usuario, cable USB, cargador, pin para tarjeta SIM

5ZQF$ 4*.5’

+ –
%5
11000
18
FOSSiBOT

fossibot.com

USB SIM

RF Specification:
Function BLE
BT(BR+EDR) WIFI 802.11b/g/
n(HT20/40) Wi-Fi
5.2G(802.11a/n20/n40/a c20/ac40/ac80) Wi-Fi
5.8G(802.11a/n20/n40/a c20/ac40/ac80)
GSM/GPRS/EGPRS 900 GSM/GPRS/EGPRS 1800 WCDMA B1
WCDMA B8
LTE FDD B1
LTE FDD B3
LTE FDD B7
LTE FDD B8
LTE FDD B20
LTE FDD B28
LTE TDD B38
LTE TDD B40 FM GPS

Operation Frequency 2402MHz2480MHz 2402MHz2480MHz 802.11b/g/n(20MHz): 2412~2472MHz; 802.11n(40MHz):2422~2462MHz 802.11a/ n20/ac20:5180MHz~5240MHz 802.11 n40/ac40:5190MHz~5230MHz 802.11 ac80:5210MHz 802.11a/ n20/ac20:5180MHz~5240MHz 802.11 n40/ac40:5190MHz~5230MHz 802.11 ac80:5210MHz TX(Uplink):880M-915MHZ; RX(Downlink):925M-960MHZ TX(Uplink):1710M-1785MHZ; RX(Downlink):1805M-1880MHZ TX(Uplink):1920-1980MHz; RX(Downlink):2110-2170MHz TX(Uplink): 880-915MHz; RX(Downlink):925-960MHz TX(Uplink):1920-1980MHz; RX(Downlink):2110-2170MHz TX(Uplink) :1710-1785MHz; RX(Downlink):1805-1880MHz TX(Uplink) :2500-2570MHz; RX(Downlink):2620-2690MHz TX(Uplink): 880MHz to 915 MHz RX(Downlink): 925 MHz to 960 MHz TX(Uplink) 832MHz~862MHz; RX(Downlink)791MHz~821MHz TX(Uplink) 703 MHz to 748MHz RX(Downlink) 758 MHz to 803 MHz TX(Uplink)& RX(Downlink)
2570 MHz to 2620 MHz
TX(Uplink)& RX(Downlink)
2300 MHz to 2400 MHz
Rx(Downlink): 87.5MHz~108MHz Rx(Downlink): 1.57542GHz

Max RF output power: <10dBm <10dBm <20dBm
<20dBm
<13.98dBm
<36dBm <33dBm <25dBm <25dBm <25dBm <25dBm <25dBm <25dBm <25dBm <25dBm <25dBm <25dBm
—

Warning:
1.Use careful with the earphone maybe possible excessive sound pressurefrom earphones and headphones can cause hearing loss.
2. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BYAN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDINGTO THE INSTRUCTIONS. 3. The product shall only be connected to a USB interface of version USB2.0. 4. Adapter shall be installed near the equipment and shall be easily accessible. 5. Operation temperature:-10~40ºC. 6. The plug considered as disconnect device of adapter. 7. SAR: The device complies with RF specifications when the device used at 0.5cm from your body (SAR limit 2.0 W/Kg). The device is in compliance with the requirements. Restrictions in the 5 GHz band: According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ),Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain(ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania(LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria(AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK),Finland (FI), Sweden (SE),, Turkey (TR), Norway(NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI). The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range.

ES

LU

RO

CZ

FR

HU

SI

DK

HR

BE

BG

DE

EE

IE

EL

IT

Cy

LV

LT

SK

MT

NL

AT

PL

PT

FI

SE

TR

NO

CH

IS

LI

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Product meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is1.6 W/kg averaged over one gram of this Mobile Phone (FCC ID:2BAK2-DT1) has been tested against this SAR limit. SAR information on this can be viewed on-line at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. FCC ID:2BAK2-DT1