PNi ES100 RFID Card Switch User Manual
- June 11, 2024
- PNI
Table of Contents
PNi ES100 RFID Card Switch
FOREWORD
PN I ES100 card switch is suitable for hotels and guest houses. By inserting the electromagnetic card into the switch, it will supply the connected electrical device.
TECHNICAL SPECIFICATIONS
- Power supply voltage: 230V
- Maximum current: 30A
- Maximum load: 6000W
- Standby consumption: 0.01W
- Delay: approx. 15 seconds (15 seconds after removing the card, the switch will switch off the power of the connected device)
- Dimensions: 84 x 84 x 43 mm
CONNECTION SCHEME
WARNINGS
- Before installing the switch, turn off the general power supply.
- We recommend that only the 9ualified electricians install the switch.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>