FALCON RIDGE HO-10002-TC01 Honda Pioneer 1000-2Soft Top Cap Instruction Manual
- June 3, 2024
- FALCON RIDGE
Table of Contents
FALCON RIDGE HO-10002-TC01 Honda Pioneer 1000-2Soft Top Cap
Notice: Do not smoke inside the cab or expose the enclosure to direct flames. Cab is Flammable.
Be sure to read these instructions thoroughly before opening and installing the top cap. The installation is best done when the temperature is 70 degrees F. or warmer. The temperature affects the adhesive Velcro, if conditions prevent installing in warmer weather it helps to store the adhesive Velcro at room temperature prior to installation.
INSTALLATION
-
Carefully open the carton and remove the enclosure on a large flat surface that is clean and free of dirt.
-
Check over the parts included in the carton with the parts list shown below:
- 2” Adhesive Velcro Hook strips: 5 each (1 extra) 6” long
- Webbing Straps w/ Velcro 4 each
If any parts are damaged or missing please contact customer service at606-845-7439.
-
Begin by wrapping the roll cage with the 6″ adhesive Velcro Strips. In the front wrap the bar about halfway down the bar then wrap the double-sided Velcro strips sewn to the webbing strap around the adhesive Velcro. The strap with Velcro should look like the photo below.
-
Next take the other two straps with Velcro sewn on one end and wrap them around the roll cage in the rear about 10-12″ below the Top Cap. Be sure to wrap the 6″ adhesive strip completely around the bar and then tightly wrap the double-sided Velcro around the adhesive strip. See the following photo.
-
Now place the top over the entire vehicle, the front of the top is identified by the sides being more steeply curved, and begin by lacing the front straps through the ladder lock buckles sewn to the front corners of the top. Diagram below shows how to use the ladder buckle.
-
Now run those straps up and through the ladder lock buckles sewn to the rear of the top. You now need to tighten and loosen the strap of the top so that it is centered correctly.
Return Policy
If for any reason you choose to return this product it must be returned within 30 days from the date the item is received. You MUST package the product exactly as it was originally packaged from the factory to get a full refund for the product!
The vinyl windows should never be folded when packaging in the box or for storage purposes. Lay all the windows on top of each other with the canvas folded in between and the paper (if available) on both sides of the windows. All returned products will be inspected upon arrival at the production facility and must be in unused, factory-new condition to receive a refund – a 25% restocking fee will apply. If ordered from Falcon Ridge please call at 606-845-7439 to gain a return authorization number, use our preferred shipping carrier (UPS) to return the item (unless the item is defective, you are responsible for paying the shipping to return the item.) Any returns submitted to Falcon Ridge without a return authorization number will be charged a 20% restocking fee. If ordered from one of Falcon Ridge’s many distributors, you must first call them and see what their return policy is. Once your item reaches our production facility, our customer satisfaction team will inspect your item to ensure unused, factory-new condition.
NOTE:
All windshields must be returned with the original protective film intact and
not removed.
Do NOT REMOVE
If you have any intentions of returning the item. Refund/ replacement of a
windshield will only be processed on items with original protective film or if
the windshield is defective.
Items must be properly packaged in the original shipping carton to protect them during transit and ensure your returned item arrives back factory fresh, and in new resalable condition (any returned items that have been used, altered or damaged in any way will not be subject for a refund.) All contents including instruction manuals, accessories, hardware, Velcro, etc. must be included in your return shipment. Only items in OEM factory new condition will be approved. Once returned items are received, credit will be issued to the original credit card/ payment method used for the purchase. Outbound shipping and return shipping cost will not be refunded. Please allow 4 to 6 weeks for your refund to be processed.
Warranty
To The Owner of this Product:
Thank you for purchasing one of our Falcon Ridge Cab Enclosures, Tops &/or
Windshields! Below are the terms under which your product is covered under our
manufacturer’s warranty.
30 Day Warranty which includes and is not limited to replacing the enclosure,
tops, and/or windshield due to defects of the product. Please refer to the
return policy in this case for more information. 1 Year Warranty includes any
defect in material or workmanship within this time frame we will gladly
correct the problem or replace the enclosure, tops &/or windshield. Upon
submitting for the correction or replacement we will need to receive pictures
of the defect in material or workmanship along with the receipt from the date
of purchase.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>