Bielmeier BCSK-4P 4V Max Lithium Ion Cordless Staple Nail Gun User Manual

Bielmeier BCSK-4P 4V Max Lithium Ion Cordless Staple Nail Gun

Product Information

Specifications

• Product Name: 4V Max Lithium-ion Cordless Staple Nail Gun
• Model Number : BCSK-4P
• Warranty : 12 months from the original date of purchase

Product Usage Instructions

Caring for the Environment: Dispose of unusable power tools in an environmentally friendly way. Recycle where facilities exist. Check with your local council authority for recycling advice. Recycling packaging reduces landfill and raw material needs while reusing recycled materials decreases pollution.

Warranty Information

Your product is guaranteed for up to 12 months from the original purchase date for DIY use only. The warranty excludes consumable parts like bearings and O-rings. Refer to the user manual fodetailed warranty terms.

Electrical Safety Warnings

Follow basic safety precautions when using mains-powered tools to reduce the risk of fire, electric shock, personal injury, and material damage. Read the manual thoroughly before operating the unit and know how to switch it off in case of an emergency.

General Power Tool Safety Warnings:

Read all safety warnings and instructions carefully to avoid electric shock, fire, or serious injury. Save all instructions and warnings for future reference. The term “power tool” refers to both corded and cordless tools.

FAQ

• Q: What should I do if my product is defective within the warranty period?
  • A: Within the first 30 days, you can return the product for a full refund. From 30 days to 90 days, a defective unit will be replaced with a new one due to manufacturing faults. From 90 days to 12 months, online service will be provided.
• Q: How can I contact customer service?
  • A : For any questions or warranty-related issues, please contact our customer service center at info@bielmeiertools.com. Provide the model number and date of purchase for quick assistance.

WHAT’S IN THE BOX

WARNING! Please carefully read this user manual before operating the staple gun

ELECTRICAL SAFETY WARNINGS

WARNING! When using mains-powered tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock, personal injury, and material damage.

Before operating the unit, carefully read the entire manual and be certain you know how to switch the unit off in case of an emergency.
Be sure to save these instructions and any other documents supplied with this unit for future reference.

Note : Bielmeier cordless tools are interchangeable for use in the United States and Canada.
Note : The power outlet used for the power tools/charger must be protected by a 30mA ground fault circuit interrupter or earth leakage circuit breaker. If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer to avoid a hazard.
Note : Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is added to prevent against potential injury should an electrical failure occur within the tool

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.

Work area safety

• Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks that may ignite the dust or fumes.
• Keep children and bystanders at a safe distance while operating a power tool. Getting distracted while using the tool may lead to injury for the operator or bystanders if not exercising proper safety.

Electrical safety

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed(grounded)power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
• Avoid bodily contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your baby is earth or ground.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• o not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. The use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter(GFCI) protected supply with a rated leakage current of 30mA or less. The use of a GFCL reduces the risk of electric shock.

Personal safety

• Always be sure to pay close attention to what you are doing when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication.
  • A moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Under the appropriate conditions, protective equipment such as a dusk mask, non-skid safety shoes, hard hat, or hearing protection can reduce personal injuries.
• Prevent unintentional starting. Make sure the switch is in the off-position before picking up or carrying the tool or connecting the unit to a power source/battery pack.
• Carrying power tools with your finger on the switch or energizing power tools that have the switch may lead to accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair, can get caught in moving parts resulting in serious injury.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.

Power tool use and care

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do a better and safer job when used for its designed purpose.
• Do not use the power tool if the on/off switch is malfunctioning. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
• This helps reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children. Do not allow persons unfamiliar with the power tool to operate it without first reading these instructions. Power tools are dangerous in the hands of untrained users.
• Properly maintain power tools. Check for misalignment or binding of moving parts, breakage of parts, and any other conditions that may affect the power tool operation.
• If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

GENERAL POWER TOOL SAFETY WARNINGS(CONT.)

• Use the power tool, accessories, and tool bits, etc. By following these instructions, taking into account the working conditions and the work to be performed.
• Use of the power tool for operations different from those intended could create a hazardous situation.

Service

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the power tool is properly and safely maintained.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to prevent any potential hazard.

STAPLE GUN SAFETY WARNINGS

WARNING! This appliance is not intended for use by persons including children with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Always assume that the tool contains fasteners. Careless handling of the stapler or nailer can result in unexpected firing of fasteners and personal injury.
• Do not point the tool towards yourself or anyone nearby. Unexpected triggering will discharge the fastener causing an injury.
• Do not actuate the tool unless the tool is placed firmly against the workpiece. If the tool is not in contact with the workpiece, the fastener may be deflected away from your target.
• Do not use this stapler or nailer for fastening electrical cables. It is not designed for electric cable installation and may damage the insulation of electric cables thereby
  causing electricity. Shock or fire hazards.

BATTERY AND CHARGER SAFETY WARNINGS

WARNING! This manual contains important safety and operating instructions for your battery and charger.

Before using the charger, read all instructions and cautionary markings on the charger, battery pack, and the product using the battery pack.

• This charger is not intended for any use other than charging rechargeable batteries. Any other use may result in a risk of fire, electric shock or electrocution.

• Since battery tools do not have to be plugged into an electric outlet, they are always in operational condition. Be aware of possible hazards when not using the battery tool or when charging accessories. Following this rule will reduce the risk of electric shock, fire, and serious personal injury.

• Do not place battery tools or batteries near fire or heat. This will reduce the risk of explosion and possibly injury.

• Do not crush, drop, or damage the battery. Do not use a battery or charger that has been dropped or has received a sharp blow. A damaged battery is subject to explosion.
  Properly dispose of a dropped or damaged battery immediately.

• To avoid damage to the electric plug and cord when disconnecting the charger, be sure to pull by the plug and not the cord. Make sure the cord is placed where it will not be
  stepped on, tripped over, or otherwise subjected to damage or stress.

• To reduce the risk of electric shock, unplug the charger from the outlet before attempting any cleaning. Removing the battery will not reduce the risk.

• A battery can explode if set near a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product near an open flame. If a battery explodes, it can propel debris and hazardous chemicals. If exposed to debris or chemicals, use water immediately to flush away particles/residue.

• Do not charge battery tools in a damp or wet location. Do not use, store or charge battery or products in locations where the temperature is less than 50℉or more than 100 ℉.

• Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury.

• Never attempt to open the battery and charger for any reason. If the plastic housing of the battery pack or charger breaks or cracks, immediately discontinue use and do not recharge.

• If the battery is not fully charged out of the carton, first read the safety instructions and then follow the charging notes and procedures.

• Save these instructions. Refer to them frequently and use them to educate others who may use this tool. If you loan this tool to someone, be sure they are familiar with these instructions too.

KNOW YOUR PRODUCT

1. Main Housing
2. Safety Striker
3. Switch Trigger
4. Magazine Latch
5. LED Indicator
6. Micro Typ-C Charging Port
7. ON/OFF Power Switch

SPECIFICATIONS

• Working Voltage : 4VDC Max
• Max Magazine Capacity : 50 Staples or Nails
• Impact Rate : 50/min
• Staple Size : 1/4”-9/16” Type 50
• Nail Size : 9/16”-5/8” Brad
• Battery : 4VDC Max, 1,500mAh, Li-ion
• Charging Time : Approx. 2 hours (based on 5VDC/1A)
• Product Weight : 1.60 lbs.

LOADING NAILS

This staple gun nailer only accepts 9/16”- 5/8” brad nails. Other types of nails will jam the unit.

1. Hold the tool upside down.
2. Squeeze the magazine latches on either side of the tool and pull the magazine out of the tool.
3. Insert a row of nails into the opening behind the nosepiece. Be sure to align them to the side marked with a nail marker so that the nail head is against the internal groove. Note: Rows of more than 65 nails do not fit in the staple nail gun.
4. Push the loading magazine back into the unit until it clips into place.

OPERATION

WARNING! Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do su could result in objects being thrown into your eyes and other possible serious injuries.
WARNING! Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING! Do not use this tool for fastening electrical cables or wires. It is not designed for electrical cables, causing electric shock or a fire hazard

APPLICATIONS

You may use this product for the purposes listed below:
Driving staples or nails into wood;
Using the included accessory, drive staples or nails to secure fencing wire or a wire screen

WARNING! Always keep your fingers away from the discharging area of the tool when driving a staple or nail. Failure to keep fingers out of the way can result in serious personal injury.

DRIVING A STAPLE OR NAIL

The Safety Striker System is a two step process where a staple or nail will only fire when the safety striker pin is pushed against the material to be fastened.

• Hold the handle firmly with the nose of the tool flat against the workpiece at a 90° angle.
• Press the safety striker pin down against the workpiece to be fastened. The safety striker pin must be depressed before pulling the switch trigger.
• The tool will drive another staple each time the trigger is depressed as long as the safety striker pin is depressed.
  • NOTE : Make sure that the power ON/OFF switch on the back of the staple gun is ON before operating.

OPERATION(CONT.)

How To Use Clamp

Place the materials that need to be bound on top of the wood, use clamps to assist in spreading them out evenly, and then secure them in place with a nail gun.

UNPACK AND SETUP

CHARGING

CAUTION! The charger for this product should be protected by a leakage current device (rated at 30mA or less)

The charge indicator will illuminate red if the battery is low, indicating that the battery needs charging.

1. 1. Plug the charging output end into the charging port on the staple gun.
2. 2. Connect the Typ-c cable to a DC power device such as a power back, or computer, or connect to an AC supply through an adaptor.
3. Note: The charge indicator will remain red whilst charging.
4. Once fully charged, the indicator light will illuminate green

ASSEMBLY

WARNING!
always be sure the power switch is in the OFF position when assembling these parts.

LOADING STAPLES

This staple nailer only accepts T50 staples, other types of staples including paper staples, will jam the unit.

1. Hold the tool upside down.
2. Squeeze the magazine latches on either side of the tool and
3. Insert a row of staples into the opening behind that nose piece.
   • Note : Rows of more than 50 staples do not fit in the staple gun.
4. Push the loaded magazine back into the unit until it clips into place

MAINTENANCE

WARNING! To avoid serious personal injury, always be sure that the power switch of the tool is OFF position when servicing.

WARNING! Never use water or any liquids to clean or rinse off your product. Corrosive liquids, water, and chemicals can enter the product’s electronic components and/or battery compartment and damage electronic components and/or the battery pack, which can result in a short circuit, increased risk of fire, and serious personal injury.
Remove any buildup of dirt and debris by wiping the product clean with a dry cloth occasionally.

WARNING! When servicing, use only identical replacement parts. Use of any other parts can create a hazard or cause product damage.

When not in use, staple nail gun should be stored in a dry, frost-free location, keep out of children’s reach. If the housing of the staple nail gun requires cleaning, do not use solvents. Use of a cloth only is recommended. Never immerse any part of the staple nail gun into liquid. Bielmeier tools will not be responsible for any damage or injuries caused by repair of the staple nail gun by an unauthorized person or mishandling..

TROUBLESHOOTING

WARNING! Always make sure the power ON/OFF switch is in the OFF position before investigating the fault.

Jammed Staple Nail Gun

Squeeze the magazine latches on either side of the tool and pull the magazine out of the tool. Using a pair of pliers, remove any jammed staples or nails.
Note : Be careful not to bend the end of the magazine. If this occurs the unit will be inoperable.
With the magazine still open, tap the safety striker pin against a surface to dislodge any loose staples.

The Battery Has A Short Run Time
Ensure that the battery is properly charged, it will take 4-5 charging cycles before the battery reaches optimum charge and run time

CARING FOR ENVIRONMENT

Power tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly way. Please recycle where facilities exist. Check with your local council authority for recycling advice.
Recycling packaging reduces the need for landfills and raw materials. The reuse of recycled material decreases pollution in the environment. Please recycle packaging where facilities exist. Check with your local council authority for recycling advice.

WARRANTY

YOUR PRODUCT IS GUARANTEED FOR A MAXIMUM PERIOD OF 12 MONTHS FROM THE ORIGINAL DATE OF PURCHASE AND IS INTENDED FOR DIY (DO IT YOURSELF) USE ONLY. Warranty excludes consumable parts, (For example, bearings and O-rings, etc.)

30-DAY MONEY BACK GUARANTY
Within the first 30 days of purchase, you are allowed to return your product for a full refund.

30 DAYS TO 90 DAYS (3 MONTHS)
A defective unit will be replaced with a new one in accordance with the terms of this warranty, due to manufacturing fault.

90 DAYS TO 12 MONTHS
Up to 12 months after purchase, we will provide speedy and effective online service.

WARNING ！ The following actions will result in the warranty becoming void.

• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the user manual.
• If the product is disassembled or tampered with in any way.
• Professional, industrial or high-frequency use.

ANY QUESTIONS, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER:

info@bielmeiertools.com

TO ENSURE THE QUICKEST RESPONSE POSSIBLE, PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE AVAILABLE SO OUR CUSTOMER SERVICE REPRESENTATIVE CAN ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE.

Yongkang Huore Industry Trading Co., Ltd.

• Email: info@bielmeiertools.com
• Add : Yuanzhou, Jiangnan Street, Yongkan City, Zhejiang, P. R. China 321300

CUSTOMER SERVICE

• info@bielmeiertools.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>