MINELAB Gold Monster 1000 Detector for Adults Instructions
- June 1, 2024
- MINELAB
Table of Contents
MINELAB Gold Monster 1000 Detector for Adults
Product Specifications
- Type: Fully automatic gold detector
- Model: GOLD MONSTER 1000
- Frequency: 45 kHz
- Sensitivity: High
- Operating Modes: Gold (Iron Reject), Deep All-Metal
- Discrimination: Improved ferrous/non-ferrous discrimination
- Waterproof: Splash-proof design
- Battery Options: Internal speaker or headphones (3.5 mm)
- Adjustable Volume: 6 levels
Product Usage Instructions
Sensitivity Settings
The GOLD MONSTER 1000 offers three sensitivity options:
- Manual sensitivity
- Auto sensitivity
- Auto + sensitivity
Adjust the sensitivity based on ground conditions and target size for optimal performance.
Operating Modes:
The detector features two main detect modes:
- Gold Mode (Iron Reject): Ideal for gold prospecting while rejecting iron signals
- Deep All-Metal Mode: Detects all metal types at increased depth
Select the appropriate mode based on your detecting needs.
Volume Adjustment
You can adjust the volume of the detector to suit your hearing preferences.
Choose from 6 different volume levels for comfortable operation.
Waterproof Design
The GOLD MONSTER 1000 is splash-proof, allowing you to use it in wet
conditions without worry. However, avoid submerging the detector completely in
water.
Frequently Asked Questions (FAQ)
-
Q: What makes the GOLD MONSTER 1000 stand out from other gold detectors?
A: The GOLD MONSTER 1000 operates at a frequency of 45 kHz, providing high sensitivity across a wide range of nugget sizes. It also features improved ferrous/non-ferrous discrimination and performs well in conductive soils, maximizing gold recovery. -
Q: How can I maximize my chances of finding gold with the GOLD MONSTER 1000?
A: Ensure you understand the sensitivity settings and adjust them according to ground conditions. Use the appropriate operating mode based on your target type, and take advantage of the detector’s high sensitivity to gold. -
Q: Is the GOLD MONSTER 1000 suitable for use with headphones?
A: Yes, the detector can be used with headphones via the 3.5 mm jack for private listening while detecting in noisy environments or for enhanced concentration.
Fully automatic detector for ultra-efficient gold recovery
- Extra sensitive 45 kHz performance
- 5-in search coil included
- Waterproof design*
- Easy quick start
- Universal shaft adapter
“I found my first nugget within an hour; funnily enough it was in a detector scrape from previous excursions. All up I found many pieces of gold, the deepest being 3 inches in variable hot ground.”
Jonathan Porter
Professional Gold Prospector, Australia
GOLD MONSTER 1000
outperforms all other
single frequency VLF
gold detectors
Up until now, there has always been a compromise between frequency and
sensitivity when optimising detector performance, because lower frequencies
are more sensitive to larger gold nuggets and higher frequencies are more
sensitive to smaller gold nuggets.
When comparing detectors, the three curves in the diagram represent each
detector’s ability to find small gold nuggets of a certain size, at a maximum
possible depth. Most detectors will find a very large nugget just beneath the
surface, however a detector’s sensitivity to gold determines how many smaller
nuggets will ultimately be recovered in difficult (noisy) ground at greater
depths.
An 18 kHz detector will normally have a depth advantage on nuggets ≥ 1.0 g
over a basic mid-frequency detector, and a 71 kHz detector will have a depth
advantage on nuggets ≤ 0.1 g. The advanced GOLD MONSTER 1000 uses an
intermediate 45 kHz frequency AND a high speed 24-bit signal processor. This
primary combination greatly boosts sensitivity to gold beyond that of other
single frequency VLF detectors over a wide range of nugget sizes, without
introducing excess noise and false signals.
The GOLD MONSTER 1000 also has improved ferrous/non-ferrous discrimination and
copes better with conductive (salty) soils than higher frequency detectors,
making it the perfect choice to maximise your gold recovery.
Auto noise cancel • Digital electronics • Auto ground balance • Faster
processor • Auto sensitivity
-
Gold Chance Indicator
-
Detect Modes
-
Sensitivity Options
Manual sensitivity, and two auto options; Auto, and Auto +. -
Adjustable Volume
Adjust to suit your hearing, with 6 volume levels.
Detect Modes | Gold (Iron reject), Deep All-Metal |
---|---|
Discrimination | Gold Chance Indicator (high/low) |
Ground Balance | Automatic (Easy-Trak) |
Noise Cancel | Automatic (On start-up) |
Sensitivity Adjust | Manual (1–10), Auto (11) , Auto + (12) |
Volume Adjust | Manual 1–6 |
Display | Monochrome LCD |
Detector Length | 1382 mm – 944 mm (54.4″–37.2″) |
Detector Weight (with 10″ × 6″ coil) | 1.33 kg (2.94 lbs) (excluding |
battery)
Audio Output| Internal speaker or headphones 3.5 mm (1/8″)
Coil (standard)| GM05 (5″ Double-D)
*** W a t erp r o o f / Splas h
p r o o f**| Coils waterproof to 1 m (3 ft), Control box
rain/
splash proof
Battery Options| Li-Ion (included), 8 × AA Batteries (not included)
Key Technology| Ultra-wide dynamic range 45 kHz VLF
Visit www.minelab.com to find your nearest dealer
www.minelab.com
Images and graphics are for illustration purposes only; Items and specifi
cations may vary from those shown. Minelab® and GOLD MONSTER 1000® are
trademarks of Minelab Electronics Pty Ltd. | 4907-0885-2-Cons-EN-AU
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>