brother HL-L2400D Black and White Laser Printer User Guide
- June 12, 2024
- Brother
Table of Contents
Quick Setup Guide
HL-L2400D
HL-L2400D Black and White Laser Printer
Read the Product Safety Guide first, then read this Quick Setup Guide for the
correct installation procedure.
Not all models are available in all countries.
The latest manuals are available at the Brother support website:
support.brother.com/manuals
Unpack the machine and check the components
Remove the protective tape or film covering the machine and the
supplies.
NOTE:
- Manuals in Spanish for this model are available at support.brother.com.
- The components included in the box may differ depending on your country.
- This product requires a USB cable to connect to a computer. If you do not already have one, please purchase a USB 2.0 cable (Type A/B) that is no more than 6 feet (2 meters) long.
- Save all packing materials and the box in case you must ship your machine.
Remove the packing materials and install the toner cartridge and drum unit
assembly
Load paper in the paper tray
Connect the power cord and trun the machine on
NOTE:
Before connecting the power cord, locate the Serial Number label on the back
or side of the machine. Record this number for product registration and
warranty support.
Printer LED Indications
Blinking:
ON: or
OFF:
| Toner Low’| Replace Toner| Drum End Soon’| Replace Drum|
Drum ! 2 3| Paper Jam / Cover is Open2| No Paper
---|---|---|---|---|---|---|---
Toner| | | | | | |
Drum| | | | | | |
Paper| | | | | | |
Ready| | | | | | |
- The yellow LED blinks for two seconds, then turns off for three seconds.
- The LED will blink ON and OFF quickly.
- The Drum Unit may not be installed correctly or the corona wires need to be cleaned. For further details, see the Online User’s Guide at support.brother.com/manuals.
Connect your computer to your machine
Follow these steps to complete the setup using one of the connection types
available on your machine.
Visit setup.brother.com to download and install
Brother software.
Follow the on-screen instructions and prompts.
Setup Finished
You can now print using your machine.
Can’t Connect? Check the following:
USB connection
Disconnect the cable.
Restart your machine and computer, and then go to.
If still unsuccessful, visit support.brother.com
for FAQs and Troubleshooting.
For detailed machine information and product specifications, see the Online
User’s Guide at
support.brother.com/manuals.
© 2023 Brother Industries, Ltd. All rights reserved.
D02SV5001-01
USA/CAN
Version A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>