EASTECH FX-8821 Dual-Band 600Mbps Wireless Adapter with Bluetooth Function Installation Guide
- June 6, 2024
- EASTECH
Table of Contents
Dual-band Wireless Adapter with Bluetooth Function
Installation
Note
This instruction take Windows 7 as an example, other system can refer to these
steps.
A: WiFi driver installation :
-
Please insert the CD into your CD-ROM driver, find and double click “Setup.exe” as below,
-
Software installation is in preparation:
-
Setup Status:
|
---|--- -
The Software Installation is Completed:
-
How to use Wi-Fi Adapter to connect?
a. Plug the Wi-Fi Adapter in, click the icon at the bottom right corner of the computer.
b. Search and connect to the Wi-Fi you need from the available Wi-Fi list. c. Enter the Wi-Fi password to connect.
d. Finally your Wi-Fi is connected.
B: Bluetooth driver installation :
-
Please ensure the Wi-Fi Adapter is plugged in, insert the CD into your CD—ROM driver, find the Bluetooth folder and double click “Setup.exe” as below,
-
Software installation is in preparation: I
-
Click “Next” and it will be installed as below:
-
Choose “Yes, I want to restart the computer now”.
-
Bluetooth Connection:
a. Click the Bluetooth icon in the bottom right corner of the computer.
b. Right-click the mouse, choose °Add a Device*, and search Bluetooth.
c. Ensure your Bluetooth devices have been turned on and ready to pair.
d. Bluetooth devices will be detected as below after a while, then double click the icon to pair. (E.g. Bluetooth Earphone)
Install Drivers: Please plug the wireless adapter into the computer first before installing the drivers ( WiFi driver or Bluetooth driver ).
FCC Warning
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. The device has been
evaluated to meet general RF exposure requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>