Yealink SIP-T40P Cost Effective Enterprise IP Phone Installation Guide

June 10, 2024
Yealink

Yealink SIP-T40P Cost-Effective Enterprise IP Phone Installation

Yealink SIP-T40P-Cost-Effective Enterprise IP-Phone-Installation-
PRODUCTC

Product Information

Specifications:

  • Compatible IP Phones: SIP-T40P, SIP-T41S/T41P, SIP-T42S/T42G
  • Wall Mount Bracket: Not included, must be purchased separately

Product Usage Instructions

Adjusting the Hookswitch Tab
The IP phone comes with the hookswitch tab in desk mount position. Before wall mounting, follow these steps to adjust the hookswitch tab:

  1. Pull the hookswitch tab in the handset cradle.
  2. Rotate the hookswitch tab 180 degrees.
  3. Reinsert the hookswitch tab.

Attaching the Wall Mount Bracket
To attach the wall mount bracket:

  1. Insert the tabs on the wall mount bracket into the slots on the back of the IP phone.
  2. Slide the wall mount bracket to the right until securely attached.

Mounting the Wall Mount Bracket
Yealink provides wall mount drilling templates to assist in positioning the screws on the wall for mounting. Follow these steps:

  1. Download the wall mount drilling template from http://www.yealink.com/Support.aspx.
  2. Use the template to mark the screw positions on the wall.
  3. Securely mount the wall mount bracket using appropriate screws (not provided).

This quick installation guide provides step-by-step instructions for mounting your IP phone to a wall.

DIMENSION

You can also download the wall mount drilling template online: http://www.yealink.com/Support.aspx.

Following the drilling template above, you can mount the IP phone to the wall, as shown below:

The wall mount is avaliable for the following IP phones:

  • SIP-T40P IP Phone
  • SIP-T41S/T41P IP Phone
  • SIP-T42S/T42G IP Phone

The wall mount bracket is required for wall mount installation, which is not included with your IP phone, contact your reseller to purchase it separately.

Packaging Contents

The following items are included in your package. If you find anything missing, contact your system administrator.

  • Wall Mount Bracket
  • Quick Installation Guide

Wall anchors and applicable tools not included in your package are also required for wall mount installation.

Adjusting the Hookswitch Tab

The IP phone is packaged with the hookswitch tab in desk mount position. Before mounting the IP phone to a wall, you must set the hookswitch tab to wall mount position.

To adjust the hookswitch tab:

  1. Pull the hookswitch tab in the handset cradle.
  2. Rotate the hookswitch tab 180 degrees.
  3. Reinsert the hookswitch tab.

Adjust the hookswitch tab as shown below:

The hookswitch tab has a lip that allows the handset to stay on-hook when the IP phone is mounted vertically.

Attaching the Wall Mount Bracket

To attach the wall mount bracket:
Insert the tabs on the wall mount bracket into the slots on the back of IP phone. And then slide the wall mount bracket to right.

Mounting the Wall Mount Bracket

Yealink provides two kinds of the wall mount drilling templates, which locate and mark the position for mounting the screws (not provided) on the wall, as shown below:

www.yealink.com

FAQ

Q: Is the wall mount bracket included in the packaging?
A: The wall mount bracket is not included in the package and must be purchased separately from your reseller.

Q: Are wall anchors and tools required for wall mount installation included?
A: Wall anchors and applicable tools are not included in the package and must be sourced separately for wall mount installation.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals