FORTIN F-150 FORD Remote Starters and Alarm Systems Installation Guide

June 11, 2024
FORTIN

FORTIN F-150 FORD Remote Starters and Alarm Systems

FORTIN F-150FORD-Remote-Starters-and-Alarm-Systems-
product

Product Information

Specifications

  • Model: EVO-ONE
  • Compatibility: Ford F-150 with Keyless entry, 2019 models
  • Firmware Version: 58.[06] (minimum)
  • Manufactured after: 2019
  • Required Module: Compatible module with QR code on the label

Product Usage Instructions

Immobilizer Bypass and Functions

The product allows for immobilizer bypass and various functions including Lock, Unlock, Arm, Disarm, RAP Disable, Hazard, Tachometer, Hood, Door Status, Trunk Status, Hand-Brake Status, and Foot-Brake Status.

Installation Requirements

This module must be installed by a qualified technician to avoid any damage to the vehicle. Ensure proper connections and follow the wiring guide provided.

Hood Pin Installation

If the vehicle can be remote started with the hood open, the Hood Pin switch must be installed. Set function A11 to off in such cases.

Remote Start Limitations

The remote start will not operate if the hood is open, Check Engine light is on, low fuel light is on, or if the vehicle battery voltage is too low. The remote start is limited to two consecutive commands and requires ignition ON and OFF to use again.

Wiring Connections

Follow the wiring connection guide provided for proper installation. Ensure correct connections for Hood Pin, Tailgate, CAN bus, and other relevant components.

FAQ

Q: What should I do if the remote start is not working?

A: Check if the hood is open, the Check Engine light is on, or the vehicle battery voltage is too low. Ensure proper installation of all components and follow the wiring guide.

Q: Can I install this module myself?

A: It is recommended to have this module installed by a qualified technician to prevent any damage to the vehicle due to incorrect connections.

Vehicle functions supported in this diagram (functional if equipped)

FORTIN F-150FORD-Remote-Starters-and-Alarm-Systems-
fig-1

FORTIN F-150FORD-Remote-Starters-and-Alarm-Systems-
fig-2

MANDATORY INSTALL

  • HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED)
  • MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

SECURITY STICKER

Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed..

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

This guide may change without notice. See www.fortin.ca for latest version.

NOTES

THE REMOTE START WILL NOT OPERATE IF :

FORTIN F-150FORD-Remote-Starters-and-Alarm-Systems-
fig-6

CAUTION

FORTIN F-150FORD-Remote-Starters-and-Alarm-Systems-
fig-7

WIRING CONNECTION

FORTIN F-150FORD-Remote-Starters-and-Alarm-Systems-
fig-8 FORTIN F-150FORD-Remote-
Starters-and-Alarm-Systems-fig-9

DCRYPTOR PROGRAMMING PROCEDURE

FORTIN F-150FORD-Remote-Starters-and-Alarm-Systems-
fig-10

BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.

FORTIN F-150FORD-Remote-Starters-and-Alarm-Systems-
fig-11 FORTIN F-150FORD-Remote-
Starters-and-Alarm-Systems-fig-12

KEY BYPASS PROGRAMMING PROCEDURE 2/2

FORTIN F-150FORD-Remote-Starters-and-Alarm-Systems-
fig-13 FORTIN F-150FORD-Remote-
Starters-and-Alarm-Systems-fig-14

REMOTE STARTER PROGRAMMING PROCEDURE

FORTIN F-150FORD-Remote-Starters-and-Alarm-Systems-
fig-15

REMOTE STARTER FUNCTIONALITY

FORTIN F-150FORD-Remote-Starters-and-Alarm-Systems-
fig-16

Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT

Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE

www.fortinbypass.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

FORTIN User Manuals

Related Manuals