INTELLINET 513579 Cat5e Patch Panel Instructions
- June 8, 2024
- INTELLINET
Table of Contents
INTELLINET 513579 Cat5e Patch Panel
NOTE
: These instructions can be used for any Patch Panel in the Intellinet line.
Your model may differ from the one shown.
Installation
- Strip away 25-30 mm of the cable jacket and separate the wires into 4 pairs. Cut the wire holder flush with the cable jacket.
- Refer to the IDC color codes on the back page to position each wire, and connect it to the patch panel using a Krone or 110D punch-down tool.
- Attach the cables to a cable manager using cable ties, then position the patch panel as desired.
IDC COLOR CODES
T568A
- Pin 5 White/Blue
- Pin 4 Blue
- Pin 1 White/Blue
- Pin 2 Green
- Pin 3 White/Orange
- Pin 6 Orange
- Pin 7 White/Brown
- Pin 8 Brown
T568B
- Pin 5 White/Blue
- Pin 4 Blue
- Pin 1 White/Orange
- Pin 2 Orange
- Pin 3 White/Green
- Pin 6 Green
- Pin 7 White/Brown
- Pin 8 Brown
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
Disposal of Electric and Electronic Equipment (applicable in the E.U. and
other countries with separate collection systems)
This symbol on the product or its packaging means that this product must not
be treated as unsorted household waste. In accordance with EU Directive
2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), this
electrical product must be disposed of in accordance with the user’s local
regulations for electrical or electronic waste. Please dispose of this product
by returning it to your local point of sale or recycling pickup point in your
municipality.
WARRANTY
REGULATORY STATEMENTS CE
The Declaration of Conformity for is available at: support.intellinet-
network.com/barcode/513548
All trademarks and trade names are the property of their respective owners. ©
IC Intracom. All rights reserved. Intellinet Network Solutions is a trademark
of IC Intracom, registered in the U.S. and other countries.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>