Commercial Electric 1001240169 2 Pack 13 in LED Colour Changing Flush Mount User Guide

Commercial Electric 1001240169 2 Pack 13 in LED Colour Changing Flush Mount

THANK YOU
We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of these LED edgelit flushmounts. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Commercial Electric!

Safety Information

• Consult a qualified electrician if you have any electrical questions.

CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation. Please call our Customer Service Team at 1-877-527-0313.

WARNING: Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.

Warranty

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five (5) years from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product.

Pre-Installation

PLANNING INSTALLATION

• Read all instructions before installation.
• To avoid damaging this product, assemble it on a soft, non abrasive surface, such as carpet or cardboard.
• Keep your receipt and these instructions for proof of purchase.

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size

PACKAGE CONTENTS

Installation

Attaching the mounting bracket to the outlet box

• Place the mounting bracket (AA) over the outlet box(not included) so that the holes on the mounting bracket (AA) align with the screw holes on the outlet box.
• Screw the outlet box screws (BB) through the holes on the mounting bracket (AA) into the screw holes on the outlet box.
  

Connecting the electrical wires

• Wrap the ground wire from the fixture (A) around the ground screw (CC) on the mounting bracket (AA). Use a wire connector (DD) to connect the ground wire from the fixture (A) to the ground wire from the outlet box.
• Use a wire connector (DD) to connect the white wire from the fixture (A) to the white wire (neutral wire) from the outlet box.
• Use a wire connector (DD) to connect the black wire from the fixture (A) to the black wire (live wire) from the outlet box.
• Wrap the three wire connections with electrical tape for a more secure connection.
• Position the wires inside the outlet box.
  

Securing the fixture to the ceiling

• Raise the fixture (A) until it is flush with the ceiling.
• Align the locking holes (C) with the hole on the mounting bracket (AA).
• Use your hand to screw the locking screw (EE) into the locking holes (C).
  

Selecting the CCT option

• Choose your correlated color temperature (CCT) from the three options: 3000K soft white, 4000K bright white, or 5000K daylight.
• Move the CCT switch on the fixture (A) to make your selection.
  

NOTICE: The factory setting is 3000K, which is the soft white light.

Securing the fixture ring

• Hold the fixture ring (D) so that the arrow label on the fixture ring (D) is pointing up.
• Align the arrow on the fixture ring (D) with the arrow on the fixture (A) so that the arrows point to each other.
• Place the fixture ring (D) over the fixture (A). Turn the fixture ring (D) clockwise until the fixture ring (D) locks into place (just a few inches) with the hooks(B) inside the fixture ring.
• Once the fixture ring (D) is installed, remove the arrow label on the fixture ring (D)
  WARNING: If not locked in place, the fixture ring(D) may fall and cause serious injury.
  

Maintenance

Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box.

Care and Cleaning

• Clean the fixture with a soft, dry cloth.
• Do not use any cleaners with chemicals, solvents, or harsh abrasives.

Troubleshooting

• Check the wire connections.
• Contact a qualified electrician or call the Customer Service Team at 1-877- 527-0313.

Customer Support

Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service
Please contact 1-877-527-0313 for further assistance.
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.CA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>