CARBONIO FERRARI DAYTONA SP3 No Drill License Plate Mount Owner’s Manual
- June 1, 2024
- CARBONIO
Table of Contents
INSTALLATION INSTRUCTIONS FOR
NO DRILL LICENSE PLATE MOUNT
FERRARI DAYTONA SP3
Thank you for choosing to purchase a Carbonio product. Please take the time to fully read over these instructions before attempting to install the kit. This will greatly speed up the installation process and minimize any difficulties you may encounter.
Tools Required:
Phillips head (star) screwdriver (for North American installs)
Kit includes:
– Pre-assembled front license plate mount
– Alcohol cleaning wipe (for applications outside of North America)
North American License Plates
Using a Philips head (star) screwdriver affix your license plate to the mount
using the two screws provided.
Note: These screws should be long enough to accommodate most aftermarket
license plate frames and there is no issue using a plate frame or cover with
the Carbonio mount.
Rest of World (ROW) License Plates
Rest of world cars have their license plates adhered to the plate mount using
high strength 3M mounting tape. Included in your kit is an alcohol cleaning
wipe. After ensuring that the backside of the license plate is clean and dry,
peel off the red covering on the 3M tape and then adhere the license plate to
the exposed 3M tape.
NOTE: The bond between the 3M tape and the bumper is VERY STRONG. Be sure
of its positioning before touching the license plate to the tape because you
will only get one chance to make the bond.
Fitting to Car
In order to fit the mount to the bumper:
– Grasp the mount from underneath on the license plate side
– Approach the bumper with the complete mount assembly from under the front of
the bumper
– Hook the long edge of the mount (two widest-spaced hooks) on the rearward
edge of the second vent louver of the central belly pan (under the vehicle).
– Pull the assembly forwards to compress the mounting springs until the 2
forward hooks clear the leading edge of the bumper
– Hook the 2 forward hooks over the leading edge of the lower bumper
LABOUR ESTIMATE GUIDE
5 Minutes
Documents / Resources
|
CARBONIO FERRARI DAYTONA SP3 No Drill License Plate
Mount
[pdf] Owner's Manual
FERRARI DAYTONA SP3 No Drill License Plate Mount, FERRARI DAYTONA SP3, No
Drill License Plate Mount, Drill License Plate Mount, License Plate Mount,
Plate Mount, Mount
---|---