MONSTER Hotas Rail Mount Joystick Instruction Manual
- June 4, 2024
- Monster
Table of Contents
- MONSTER Hotas Rail Mount Joystick
- GENERAL ASSSEMBLY INFO AND HOW TO PROFILE NUT
- HEX KEY SET WITH BALL HEAD + EXTENSION OR SIMILAR REQUIRED
- UNIVERSAL CONNECTOR
- BOLT DIMENSIONS AND HOW TO MEASURE THEM mm
- PARTS
- ASSEMBLY
- ASSEMBLING AN EXISTING TABLE MOUNT
- TROUBLE SHOOTING
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MONSTER Hotas Rail Mount Joystick
GENERAL ASSSEMBLY INFO AND HOW TO PROFILE NUT
HEX KEY SET WITH BALL HEAD + EXTENSION OR SIMILAR REQUIRED
UNIVERSAL CONNECTOR
BOLT DIMENSIONS AND HOW TO MEASURE THEM mm
PARTS
Dimensions in mm / different scales.No extra or spare parts listed
MTSIM RAIL MOUNT
Rail Mount
OR Rail Mount long version
Mounting plate as ordered
ASSEMBLY
Tsliding rail under the front edge of your desk. Only for desks with a solid wooden top. Please only use screws intended for the specific wood type and thickness. We advise you to ask an expert for installation advice.
Screw not included.
Before attaching the sliding rail to thedesk make sure that it is possible to slide in the mounts in the rear slot.
Details
ASSEMBLING AN EXISTING TABLE MOUNT
Remove
Turned
Replace the 70 mm profile with a 110 mm profile or a 160 mm profile long version.
TROUBLE SHOOTING
If you can not slide in the mounts after you have attached the sliding rail to your desk try to slide in only the shown parts (possibly before attaching the rail to your desk.
Assembley
If the Rail Mount does not run smooth loosen and tighten the red marked screws.
WARNING NOTICES
CAUTION
Check before usage if all screws are tightened. Check before usage that the
mounting plate is screwed on tight after making height adjustments.
DANGER
Contains small parts not suitable for children under 3 years. Only suitable
for children over 12 years and adults. All MTSIM products are hand assembled
and quality checked. The mount is designed for usage only with a computer
controller i.e. joystick or throttle.We exclude liability if the product is
used for purposes other than intended. MTSIM shall be liable for damage
arising from causes other than the detriment to life, body and health only to
the extent that such damage arises from wilful misconduct, gross negligence or
the culpable violation of a fundamental contractual obligation on the part of
MTSIM or a vicarious agent e.g. the delivery service of MTSIM. Any further
liability for damages shall be excluded. If you have safety concerns or
questions regarding assembly, contact us under
info@mtsim.com or visit
www.mtsim.com/en
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>